journal article·2018-06Open access

Porous titania photoelectrodes built on a Ti-web of microfibers for polymeric electrolyte membrane photoelectrochemical (PEM-PEC) cell applications

G. Zafeiropoulos, T. Stoll, I. Dogan, M. Mamlouk, M.C.M. van de Sanden, M.N. Tsampas

Abstract

Abstract Conventional photoelectrochemical (PEC) cells are based on planar photoelectrodes supported on glass substrates and liquid electrolytes. Only few recent studies have examined an alternative PEC design which is robust and scalable, where the key elements are polymeric electrolyte membranes and porous photoelectrodes. This work aims to give further insights on the operation of such cells utilizing titania photoelectrodes and proton and hydroxide ion conducting membranes. Two families of photoelectrodes were developed on Ti porous substrate; TiO2 nanotubes grown by anodization and subsequent oxygen annealing, and TiO2 layers developed under oxygen annealing. Initial screening of the photoanodes for water splitting and (poly)alcohol photo-oxidation took place in conventional PEC cells. We found that the annealing temperature affects the performance of the photoanodes, evidenced by a monotonic increase in the activity for water photo-oxidation with increasing annealing temperature. Moreover it was demonstrated that anatase phase is predominantly active for the (poly)alcohol electro-oxidation, while there is a synergy between rutile and anatase which is beneficial for water splitting. In addition, the most promising photoanodes for water splitting were evaluated in our polymeric electrolyte membrane photoelectrochemical(PEM-PEC) cell during gas phase operation. It was found that PEM-PEC operation is more efficient when OH- conducting membranes are used, while the nature of the carrier gas does not significantly influence the activity. Overall, PEM-PEC operation is more promising than conventional PEC in both acidic and alkaline media, since comparable (or even at some cases higher) photocurrents were obtained while liquid pumping systems are not required for PEM-PEC devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Photocatalysis Techniques · TiO2 Photocatalysis and Solar Cells · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Chen · 2013
2. Powering the planet: chemical challenges in solar energy utilization10.1073/pnas.0603395103 ↗
3. 2012
4. The geographical distribution of fossil fuels unused when limiting global warming to 2 °C10.1038/nature14016 ↗
5. Recent advances in hybrid photocatalysts for solar fuel production10.1039/c2ee02849b ↗
6. Photoelectrochemical water splitting: materials, processes and architectures
7. Earth-abundant catalysts for electrochemical and photoelectrochemical water splitting10.1038/s41570-016-0003 ↗
8. Semiconducting materials for photoelectrochemical energy conversion10.1038/natrevmats.2015.10 ↗
9. Design of compact photoelectrochemical cells for water splitting10.2516/ogst/2015015 ↗
10. Electrochemical photolysis of water at a semiconductor electrode10.1038/238037a0 ↗
11. A comprehensive review on PEM water electrolysis10.1016/j.ijhydene.2013.01.151 ↗
12. Solid-state photoelectrochemical H2 generation with gaseous reactants10.1016/j.electacta.2013.03.013 ↗
13. Hydrogen production from water and conversion of carbon dioxide to useful chemicals by room temperature photoelectrocatalysis10.1016/0920-5861(95)00198-0 ↗
14. Fuel cell geared in reverse: photocatalytic hydrogen production using a TiO2/nafion/Pt membrane assembly with no applied bias10.1021/jp907367k ↗
15. Effect of water and annealing temperature of anodized TiO2 nanotubes on hydrogen production in photoelectrochemical cell10.1016/j.electacta.2013.05.090 ↗
16. Composite proton-conducting polymer membranes for clean hydrogen production with solar light in a simple photoelectrochemical compartment cell10.1016/j.ijhydene.2011.11.097 ↗
17. Synthesis of solar fuels by a novel photoelectrocatalytic approach10.1039/b925470f ↗
18. An all solid photoelectrochemical cell for the photooxidation of organic vapours under ultraviolet and visible light illumination10.1016/j.elecom.2009.06.019 ↗
19. Chronoamperometric study of membrane electrode assembly operation in continuous flow photoelectrochemical water splitting10.1039/c3cp50890k ↗
20. Air-based photoelectrochemical cell capturing water molecules from ambient air for hydrogen production10.1039/C4RA05371K ↗
21. Gas phase photoelectrochemistry in a polymer electrolyte cell with a titanium dioxide/carbon/Nafionphotoanode10.1149/1.3465306 ↗
22. Effects of temperature, triazole and hot-pressing on the performance of TiO2photoanode in a solid-state photoelectrochemical cell10.1016/j.electacta.2013.10.095 ↗
23. Assessing the photoelectrochemical properties of C, N, F codoped TiO2 nanotubes of different lengths10.1016/j.cattod.2016.11.040 ↗
24. Solid-state photoelectrochemical cell with TiO2 nanotubes for water splitting10.1039/C6PP00217J ↗
25. Review of recent trends in photoelectrocatalytic conversion of solar energy to electricity and hydrogen10.1016/j.apcatb.2017.03.067 ↗
26. solar fuel production in a novel polymeric electrolyte membrane photoelectrochemical (PEM-PEC) cell with a web of titania nanotube arrays as photoanode and gaseous reactants10.1016/j.ijhydene.2016.07.230 ↗
27. TiO2 nanotubes: synthesis and applications10.1002/anie.201001374 ↗
28. A review of growth mechanism, structure and crystallinity of anodized TiO2 nanotubes10.1016/j.mser.2013.10.001 ↗
29. Nanotechnology makes biomass electrolysis more energy efficient than water electrolysis
30. Optimizing anodization conditions for the growth of titania nanotubes on curved surfaces10.1021/acs.jpcc.5b03383 ↗
31. Polymer electrolyte membranes for water photo-electrolysis10.3390/membranes7020025 ↗
32. The advantages of the use of porous metal fiber media in different alloys as gas diffusion layer in various energy storage systems10.1149/MA2016-01/3/396 ↗
33. Fabrication of tungsten trioxide photoanode with titanium microfibers as a three dimensional conductive back contact10.1016/j.matlet.2017.04.051 ↗
34. Degradation of radiation grafted hydroxide anion exchange membrane immersed in neutral pH: removal of vinylbenzyltrimethylammonium hydroxide due to oxidation10.1039/C6TA08232G ↗
35. Study on the effect of the degree of grafting on the performance of polyethylene-based anion exchange membrane for fuel cell application10.1016/j.ijhydene.2015.10.108 ↗
36. A lithographic approach to determine volume expansion factors during anodization: using the example of initiation and growth of TiO2-nanotubes10.1016/j.electacta.2009.05.064 ↗
37. Probing the optical property and electronic structure of TiO2 nanomaterials for renewable energy applications10.1021/cr5000893 ↗
38. Photocatalytic valorization of ethanol and glycerol over TiO2 polymorphs for sustainable hydrogen production10.1016/j.apcata.2015.09.022 ↗
39. Photoelectroactivity and Raman spectroscopy of anodized titania (TiO2) photoactive water-splitting catalysts as a function of oxygen-annealing temperature10.1039/c0jm03106b ↗
40. Selective oxidation of sacrificial ethanol over TiO2-based photocatalysts during water splitting10.1039/c1ee01476e ↗
41. Titania nanotube powders obtained by rapid breakdown anodization in perchloric acid electrolytes10.1016/j.jssc.2017.03.007 ↗
42. Jarosz · J. Phys. Chem. · 2015 · 119 · 24182
43. Size-dependent modifications of the first-order Raman spectra of nanostructured rutile TiO210.1103/PhysRevB.77.195414 ↗
44. Raman spectroscopy characterization of TiO2 rutile nanocrystals10.1103/PhysRevB.75.045416 ↗
45. Direct characterization of nanocrystal size distribution using Raman spectroscopy10.1063/1.4824178 ↗
46. Electrochemically hydrogenated TiO2 nanotubes with improved photoelectrochemical water splitting performance10.1186/1556-276X-8-391 ↗
47. Effect of Annealing Temperature on the Hydrogen Production of TiO2 Nanotube Arrays in a Two-Compartment Photoelectrochemical Cell10.1021/jp1116118 ↗
48. Enhancement of the photoelectrochemical conversion efficiency of nanotubular TiO2photoanodes using nitrogen plasma assisted surface modification10.1088/0957-4484/20/7/075704 ↗
49. Photoelectrochemical water oxidation characteristics of anodically fabricated TiO2 nanotube arrays: structural and optical properties10.1021/jp1037014 ↗
50. Efficient photoelectrodes from anatase TiO2 nanotube arrays decorated with particles/rods/3D microflower rutile crystals for photoelectrochemical water splitting10.1007/s10008-017-3523-5 ↗
51. Band alignment and controllable electron migration between rutile and anatase TiO210.1038/srep11482 ↗
52. Why is anatase a better photocatalyst than rutile? - Model studies on epitaxial TiO2 films10.1038/srep04043 ↗
53. Comparing photoelectrochemical water oxidation, recombination kinetics and charge trapping in the three polymorphs of TiO210.1038/s41598-017-03065-5 ↗
54. Current status of hydrogen production techniques by steam reforming of ethanol: a review10.1021/ef0500538 ↗
55. A review on reforming bio-ethanol for hydrogen production10.1016/j.ijhydene.2007.04.038 ↗
56. Photocatalytic H2 evolution over TiO2 nanoparticles. The synergistic effect of anatase and rutile10.1021/jp910810r ↗
57. New insights into the relationship between structure and photocatalytic properties of TiO2 catalysts10.1039/C4RA11489B ↗
58. Influence of the anatase/rutile ratio on the TiO2 photocatalytic activity for the photodegradation of light hydrocarbons
59. Influence of the preparation methods of TiO2 on the photocatalytic degradation of phenol in aqueous dispersion10.1021/j100365a058 ↗
60. Photoelectrocatalytic electricity and/or H2 production from alcohols: the effect of TiO2 film thickness10.1149/1.3522808 ↗