journal article·2018-06

Increase in conversion efficiency of above 14% in Cu(In,Ga)3Se5 (β-CIGS) solar cells by Na2S incorporation through the surface of β –CIGS film

Ji Hye Kim, Seung Tae Kim, Liudmila Larina, Byung Tae Ahn, KiHwan Kim, Jae Ho Yun

Publisher page

Abstract

Abstract Little work has been reported on the performance improvement of the β-CIGS solar cell itself even though the β-CIGS phase can have an ideal band gap for high-conversion efficiency solar cells. We incorporated Na2S to β-CIGS film by supplying Na2S to three different stages: on the (In,Ga)2Se3 layer, on the α-CIGS layer, and on the β -CIGS layer in the three-stage co-evaporation process. The purpose of Na2S incorporation was to control the carrier concentration and passivate grain boundaries in β–CIGS film. With Na2S incorporation on the β–CIGS surface, both the Cu and Se concentrations at the β–CIGS surface were greatly reduced and the Na-depleted subsurface area that existed in the referenced β–CIGS film without Na2S was eliminated. The carrier concentration determined at 100 kHz was lowest with Na2S incorporation on the β–CIGS surface, while that determined at 1 MHz was similar with various Na2S supply stages. The open-circuit voltage and fill factor greatly increased in the β–CIGS solar cell with the Na2S incorporation. The cell conversion efficiency with Na2S incorporation on the β-CIGS layer improved from 10.3% to 14.2% without AR coating, which is a record efficiency in β-CIGS solar cells at this time.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Potassium-induced surface modification of Cu(In, Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
2. Effects of heavy alkali elements in Cu(In, Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
3. Features of KF and NaF postdeposition treatments of Cu(In, Ga)Se2 absorbers for high efficiency thin film solar cells10.1021/acs.chemmater.5b02335 ↗
4. Surface modification of CIGS film by annealing and its effect on the band structure and photovoltaic properties of CIGS solar cells10.1016/j.cap.2014.09.023 ↗
5. Effect of CuIn3Se5 layer thickness on CuInSe2 thin films and devices10.1016/S0038-092X(98)00024-3 ↗
6. Characterization of Cu-poor surface on Cu-rich CuInSe2 film prepared by evaporating binary selenide compounds and its effect on solar efficiency10.1016/S0040-6090(02)00249-3 ↗
7. Interfacial quality improvement of Cu(In, Ga)Se2 thin film solar cells by Cu-depletion layer formation10.7567/APEX.9.092301 ↗
8. Effects of sodium on Cu(In, Ga)Se2-based thin films and solar cells10.1143/JJAP.36.732 ↗
9. A structural study of Cu–In–Se compounds by x-ray absorption fine structure10.1557/jmr.2011.63 ↗
10. Crystallographic and optical properties and band structures of CuInSe2, CuIn3Se5, and CuIn5Se8 phases in Cu-poor Cu2Se–In2Se3 pseudo-binary system10.7567/JJAP.55.04ES15 ↗
11. Temperature dependence of the fundamental absorption edge in CuGa3Se510.1016/S0925-8388(98)00878-0 ↗
12. Characteristics of chemical bonds in CuInSe2 and its thin-film deposition processes used to fabricate solar cells10.7567/JJAP.50.05FA02 ↗
13. Fabrication of wide-bandgap β-Cu (In, Ga)3Se5 thin films and their application to solar cells
14. Effect of Se flux and Se treatment on the photovoltaic performance of β–CIGS solar cells
15. Characterization of Cu (In1-xGax)Se2 films prepared by three-stage co-evaporation and their application to CIGS solar cells for a 14.48% efficiency
16. Control of the preferred orientation of Cu(In,Ga)Se2 thin film by the surface modification of Mo film10.1149/2.009201jes ↗
17. Preferred orientation control of Cu (In1-xGax)Se2 (x≈ 0.28) thin films and its influence on solar cell characteristics10.1143/JJAP.41.507 ↗
18. Microstructural properties of (In, Ga)2Se3 precursor layers for efficient CIGS thin-film solar cells10.1016/j.solmat.2008.11.028 ↗
19. Texture manipulation of CuInSe2 thin films10.1016/S0040-6090(99)00778-6 ↗
20. de Vidales, Structural characterization of CuIn2Se3.5, CuIn3Se5, and CuIn5Se8 compounds10.1016/S0040-6090(99)00771-3 ↗
21. Optical properties of monocrystalline CuIn5Se8
22. Reduction of point defects and Cu surface composition in Cu(In, Ga)Se2 film by Se annealing with a NaF overlayer at intermediate temperatures10.1016/j.cap.2017.03.009 ↗
23. Fabrication, characterization and optical properties of CuIn3Se5 bulk compounds10.4236/wjcmp.2015.53021 ↗
24. Photoluminescence properties of sodium incorporation in CuInSe2 and CuIn3Se5 thin films10.1016/S0927-0248(00)00294-4 ↗