Directionally solidified Al2O3–Yb3Al5O12 eutectics for selective emitters
Source abstract
Abstract
Al2O3-Yb3Al5O12 eutectic rods were directionally solidified using the laser floating zone method at rates between 25 and 750 mm/h. The microstructure consisted of an interpenetrated network of both eutectic phases for all the growth rates. The size of the phases was strongly dependent on the growth rate, the eutectic interspacing decreasing from 4.5 µm at the lowest growth rate to 600 nm at 750 mm/h. The optical transmission of the sample with coarser microstructure was measured and compared with that of an Yb3Al5O12 single crystal grown "ad hoc" using the same method. The apparent "oscillator strength" of the single 2F7/2¿2F5/2 Yb3+ absorption band was larger in the eutectic sample than in the single crystal, which was attributed to the increase in the light path caused by multiple refractions at the eutectic interphases. The thermal emission of the eutectic rod was studied between 1000 °C and 1500 °C. An intense and relatively narrow emission band at about 1 µm corresponding to the 2F5/2¿2F7/2 Yb3+ electronic transition was observed in the whole temperature range. The intensity of the band increased with the temperature up to about 1300 °C. At higher temperatures a saturation of the selective emission was observed which was attributed to the competition between the increase in the thermal population of the excited state and the enhancement of the non-radiative de-excitation channels with the temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Solid State Laser Technologies · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. An overview of thermophotovoltaic generation of electricity10.1016/S0927-0248(00)00206-3 ↗
2. The challenge of high-performance selective emitters for thermophotovoltaic applications10.1088/0268-1242/18/5/306 ↗
3. Characterisation of rare earth selective emitters for thermophotovoltaic applications10.1016/S0927-0248(01)00127-1 ↗
4. High-temperature spectral emittance of oxides of erbium, samarium, neodymium and ytterbium10.1366/000370272774352597 ↗
5. R.E. Nelson, Rare earth oxide TPV emitters, in: Proceedings of the 32nd International Power Sources Symposium. Electrochemical Society, Pennington, NJ, 1986, pp. 95–100.
6. Rare earth doped high temperature ceramic selective emitters10.1016/S0955-2219(99)00096-5 ↗
7. Directionally-solidified eutectic ceramic oxides10.1016/j.pmatsci.2005.10.002 ↗
8. High-temperature strength and thermal stability of a unidirectionally solidified Al2O3/YAG eutectic composite10.1023/A:1004377626345 ↗
9. Fracture and deformation behavior of melt-grown composites at very high temperature10.1023/A:1017519113164 ↗
10. Mechanical properties of melt-grown alumina-yttrium aluminum garnet eutectics up to 1900K10.1111/j.1551-2916.2005.00265.x ↗
11. Microstructure and high-temperature strength of Al2O3/Er3Al5O12/ZrO2 ternary melt growth composite10.1007/s10853-005-6311-z ↗
12. Microstructural stability at elevated temperatures of directionally solidified Al2O3/Er3Al5O12 eutectic ceramics10.1016/j.jcrysgro.2011.11.061 ↗
13. Microstructure and mechanical properties of Al2O3/Er3Al5O12 eutectic rods grown by the laser-heated floating zone method10.1016/j.jeurceramsoc.2010.05.004 ↗
14. Selective emission of Al2O3/E3Al5O12 eutectic composite for thermophotovoltaic generation of electricity10.1143/JJAP.39.1957 ↗
15. Thermal emission properties of Al2O3/Er3Al5O12 eutectic ceramics10.1016/j.jeurceramsoc.2005.01.031 ↗
16. Optical absorption and selective thermal emission in directionally solidified Al2O3–Er3Al5O12 and Al2O3–Er3Al5O12–ZrO2 eutectics10.1016/j.jeurceramsoc.2013.05.001 ↗
17. Phase identification of Al2O3/RE3Al5O12 and Al2O3/REAlO3 (RE=Sm–Lu, Y) eutectics10.1016/S0022-0248(00)00516-9 ↗
18. Spectral emissivity of ytterbium oxide-based materials for application as selective emitters in thermophotoltaic devices10.1016/S0927-0248(99)00049-5 ↗
19. Study of the gas inclusions in Al2O3/Y3Al5O12 and Al2O3/Y3Al5O12/ZrO2 eutectic fibers grown by laser floating zone10.1016/j.jcrysgro.2007.02.042 ↗
20. Exner · 1988
21. Lamellar and Rod Eutectic Growth
22. Microstructure of Al2O3/Y3Al5O12 eutectic rods grown by μ-PD method10.1016/S0022-0248(98)01052-5 ↗
23. Processing, microstructure and optical properties of the directionally solidified Al2O3/EuAlO3 eutectic rods10.1016/j.jcrysgro.2011.12.032 ↗
24. Growth and spectroscopic analysis of Yb3+ doped Y3Al5O12 fiber single crystals10.1063/1.1597763 ↗
25. Spectra of the selective heat radiation of Yb2O3 under the laser thermal excitation10.1134/S1054660X11040098 ↗
26. Heat to light energy conversion by emitters doped with rare-earth metal ions10.1063/1.117950 ↗
27. Henderson · 1989
28. Vibrational properties of the rare earth aluminum garnets10.1063/1.1623328 ↗