journal article·2011-07

Current–voltage analysis of the record-efficiency CuGaSe2 solar cell: Application of the current separation method and the interface recombination model

M. Saad, A. Kassis

Publisher page

Abstract

Abstract Current–voltage ( j–V ) characteristics of the record-efficiency CuGaSe 2 solar cell measured under several illumination levels are analyzed using a two-diode equation for a more accurate description of cell behavior. The contribution of each diode to the total cell j–V characteristic under illumination was estimated using the current separation method presented recently [1] . This is performed in an effort to identify the distinctive features of this record-efficiency cell, which have led to the up-to-date highest open circuit voltage of V oc =946 mV and fill factor of FF =66.5% for CuGaSe 2 solar cells. Furthermore, the interface recombination component of the cell current under illumination is quantitatively discussed applying the interface recombination model presented earlier [2] .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Separation of solar cell current into its constituent parallel currents under illumination10.1016/j.renene.2008.08.009 ↗
2. Effect of interface recombination on solar cell parameters10.1016/S0927-0248(03)00101-6 ↗
3. Lux-Steiner, Quantitative analysis of cell transparency and its implications for the design of chalcopyrite-based tandems10.1016/j.solmat.2008.10.008 ↗
4. Critical issues in the design of polycrystalline thin-film tandem solar cells10.1002/pip.491 ↗
5. A stacked chalcopyrite thin-film tandem solar cell with 1.2V open-circuit voltage10.1002/pip.486 ↗
6. ZnO/CdS/CuGaSe2 solar cells with 9.7% power conversion efficiency
7. V. Nadenau, D. Hariskos, H.W. Schock, CuGaSe2 Based Thin Film Solar cell with improved performance, in: Proceedings of the 14th European Photovoltaic Solar Energy Conference, Bedford, UK, 1997, pp. 1250–1253.
8. The role of the CdS buffer layer in CuGaSe2-based solar cells10.1088/0953-8984/19/35/356222 ↗
9. S. Nishiwaki, M. Dziedzina, S. Schuler, S. Siebentritt, M. Bär, A. Rumberg, M. Rusu, R. Klenk, M.Ch. Lux-Steiner, Preparation of CuGaSe2 solar cells and their optimization, in: Proceedings of the Third World Conference on Photovoltaic Energy Conversion, Osaka, Japan, 2003, pp. 471–474.
10. Electronic properties of CuGaSe2-based heterojunction solar cells. part I. transport analysis10.1063/1.371903 ↗
11. Thermally and light-activated current in ZnO/CdS/CuGaSe2 single crystal solar cells10.1016/j.renene.2007.06.011 ↗
12. Analysis of illumination-intensity-dependent j–V characteristics of ZnO/CdS/CuGaSe2 single crystal solar cells10.1016/S0927-0248(03)00017-5 ↗
13. Analysis of multi-crystalline silicon solar cells at low illumination levels using a modified two-diode model10.1016/j.solmat.2010.06.036 ↗
14. Photovoltaic measurements10.1016/0379-6787(85)90007-9 ↗
15. Performance of Cu(In,Ga)Se2 solar cells under low Irradiance10.1016/S0040-6090(03)00184-6 ↗