Synthesis of CuInSe2 thin films on flexible Ti foils via the hydrothermally-assisted chemical bath deposition process at low temperatures
Source abstract
Abstract
Abstract Single phased copper indium diselenide (CuInSe2) films have been successfully prepared on titanium substrates directly by adopting a hydrothermally-assisted chemical bath deposition technique. CuInSe2 films belong to the chalcopyrite structure were uniformly prepared at various penetration depths. The synthesis temperature of the monophasic CuInSe2 films was decreased to 180 °C without the selenization process. The required temperature for preparing single phased CuInSe2 films was remarkably lower than the temperatures used in conventional vacuum and non-vacuum processes. During the hydrothermal reaction, highly reactive selenium ions reacted with copper and indium ions directly to produce CuInSe2 films on the substrates without any high-temperature treatment, leading to the decrease in reaction temperatures appreciably. The increase in the hydrothermal temperatures significantly improved the crystallinity and enlarged the particle sizes of CuInSe2 films. This developed process can be effectively applied for the preparation of CuInSe2 films on flexible substrates at low temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Progress toward 20% efficiency in Cu(In,Ga)Se2 polycrystalline thin film solar cells10.1002/(SICI)1099-159X(199907/08)7:4<311::AID-PIP274>3.0.CO;2-G ↗
2. Properties of 19.2% efficiency ZnO/CdS/Cu(In,Ga)Se2 thin film solar cells10.1002/pip.494 ↗
3. 19.9%-Efficiency ZnO/CdS/CuInGaSe2 solar cell with 81.2% fill factor10.1002/pip.822 ↗
4. D. Bremaud, D. Rudmann, G. Billger, H. Zogg, A.N. Tiwari, Towards the development of flexible CIGS solar cells on polymer films with efficiency exceeding 15%, in: Proceedings of the 31th IEEE Photovoltaic Specialists Conference, Orlando, 2005, pp. 223–226.10.1109/PVSC.2005.1488109 ↗
5. Flexible Cu(In,Ga)Se2 thin-film solar cells for space application10.1016/j.tsf.2005.11.068 ↗
6. Crystallization and surface segregation in CuIn0.7Ga0.3Se2 thin films on Cu foils grown by pulsed laser deposition10.1016/j.apsusc.2010.02.091 ↗
7. Flexible Cu(In,Ga)Se2 on Al foils and the effects of Al during chemical bath deposition10.1016/j.tsf.2006.12.152 ↗
8. N.G. Dhere, S.R. Ghongadi, M.B. Pandit, Lightweight CIGS2 thin-film solar cells on stainless steel foil, in: Proceedings of the 17th European Photovoltaic Solar Energy Conference, Munich, Germany, 2001, pp. 2211–2214.10.1557/PROC-668-H3.4 ↗
9. CuInSe2 thin-film deposition on flexible plastic substrate: electrolyte recirculation rate and deposition potential effects10.1007/s10008-009-0909-z ↗
10. Development of high-efficiency flexible Cu(In,Ga)Se2 solar cells: a study of alkali doping effects on CIS, CIGS, and CGS using alkali-silicate glass thin layers10.1016/j.cap.2009.11.024 ↗
11. Na incorporation into Cu(In,Ga)Se2 for high-efficiency flexible solar cells on polymer foils10.1063/1.1857059 ↗
12. Flexible Cu(In,Ga)Se2 solar cells fabricated using alkali-silicate glass thin layers as an alkali source material10.1063/1.3005376 ↗
13. Approaches to flexible CIGS thin-film solar cells10.1016/j.tsf.2004.11.063 ↗
14. Arrangement of flexible foil substrates for CuInSe2-based solar cells10.1016/S0257-8972(01)01333-0 ↗
15. Low-cost CIGS solar cells by paste coating and selenization10.1016/j.tsf.2004.11.007 ↗
16. Hydrazine-based deposition route for device-quality CIGS films10.1016/j.tsf.2008.10.079 ↗
17. CuInSe2 thin-film deposition on flexibel plastic substrate: electrolyte recirculation rate and deposition potential effects10.1007/s10008-009-0909-z ↗
18. Microemulsion-mediated solvothermal synthesis of copper indium diselenide powders10.1016/j.solmat.2010.05.005 ↗
19. Preparation and characterization of CuInSe2 particles via the hydrothermal route for thin-film solar cells10.1016/j.jallcom.2010.08.164 ↗
20. Microstructural characterization for sputter-deposited CuInSe2 films and photovoltaic devices10.1143/JJAP.34.4715 ↗
21. Highly efficient CIS solar cells and modules made by co-evaporation process10.1016/j.tsf.2008.10.126 ↗
22. Copper indium diselenide thin film solar cells fabricated on flexible foil substrates10.1016/0927-0248(93)90074-D ↗
23. Phase formation and ferroelectric characteristics of nonfatigue barium bismuth tantalate thin films10.1063/1.371695 ↗
24. Na-induced variation in the structural, optical and electrical properties of Cu(In,Ga)Se2 thin films10.1063/1.3190528 ↗
25. Raman investigations of Cu(In,Ga)Se2 thin films with various copper contents10.1016/j.tsf.2008.07.011 ↗
26. Structural characterization of indium oxide nanostructures: a Raman analysis10.1088/0022-3727/43/4/045401 ↗