journal article·2021-10

Corrosion evaluation by electrochemical real-time tracking of VM12 martensitic steel in a ternary molten salt mixture with lithium nitrates for CSP plants

Fabiola Pineda, Abdiel Mallco, Flavio De Barbieri, Claudia Carrasco, Mauro Henriquez, Edward Fuentealba, Ángel G. Fernández

Publisher page

Abstract

Abstract In the context of Concentrated Solar Power (CSP), the metallic materials employed to build the critical components of the plant are exposed to severe conditions, Carbon and stainless steel have been used for this application. However, the technology CSP will evolve, so these materials will probably be replaced by superior performing and economically competitive ones. Likewise, the investigation of molten salts with better thermophysical properties but no more corrosive than the actual benchmark has become a complex challenge. Thus, the research motivation was to study the performance of a martensitic steel exposed to a promising ternary molten salt with lithium nitrate at 550 °C by its corrosion behavior and mechanical properties. The corrosion process was monitored through electrochemical impedance spectroscopy (EIS). The mechanical properties in molten salt at high temperature were determined by slow strain rate testing (SSRT), complementing with the characterization of corrosion products to propose the corrosion mechanism in one scheme. The results showed that the steel is less robust but more ductile in the presence of molten salts at high temperatures; besides the material develop a multi-layer non-porous corrosion product that, despite deteriorating, confers corrosion rates within the recommended ranges for the application.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Corrosion evaluation of alumina-forming alloys in carbonate molten salt for CSP plants10.1016/j.renene.2019.03.087 ↗
2. Concentrating solar power Gen3 demonstration roadmap
3. Latest developments on TES and CSP technologies – energy and environmental issues, applications and research trends10.1016/j.applthermaleng.2019.114806 ↗
4. Corrosion monitoring and mitigation techniques on advanced thermal energy storage materials for CSP plants10.1016/j.solmat.2018.12.028 ↗
5. Corrosion of alumina-forming austenitic steel in molten nitrate salts by gravimetric analysis and impedance spectroscopy10.1002/maco.201307422 ↗
6. Oxidation behavior and microstructure evolution of alumina-forming austenitic & high entropy alloys in steam environment at 1200 ° C10.1016/j.corsci.2020.108654 ↗
7. Molten chloride salts for next generation concentrated solar power plants : mitigation strategies against corrosion of structural materials10.1016/j.solmat.2018.12.020 ↗
8. Corrosion resistance of alumina-forming alloys against molten chlorides for energy production . I : pre-oxidation treatment and isothermal corrosion tests10.1016/j.solmat.2017.02.019 ↗
9. Corrosion resistance of alumina forming alloys against molten chlorides for energy production . II : electrochemical impedance spectroscopy under thermal cycling conditions10.1016/j.solmat.2017.03.025 ↗
10. Corrosion resistant alloys (CRAs) in the oil and gas industry, nickel inst
11. Materials corrosion for thermal energy storage systems in concentrated solar power plants10.1016/j.rser.2018.01.010 ↗
12. Thermophysical properties of low cost lithium nitrate salts produced in northern Chile for thermal energy storage10.1016/j.renene.2016.08.052 ↗
13. Lithium nitrate purity influence assessment in ternary molten salts as thermal energy storage material for CSP plants10.1016/j.renene.2019.10.075 ↗
14. Corrosion behavior of Ni-Al alloys beneath chlorides melt salt at 700 ° C10.1016/j.solener.2019.04.045 ↗
15. The oxidation behaviour of FeCrAl “alumina forming” alloys at high temperatures10.1016/S0167-2738(97)00299-3 ↗
16. Weld behavior of martensitic steels and ni-based alloys for high temperature components10.1016/j.proeng.2013.03.273 ↗
17. Corrosion behavior and lifetime prediction of VM12, Sanicro 25 and Inconel 617 in supercritical carbon dioxide at 600 °C10.1016/j.corsci.2020.108870 ↗
18. Microstructure and mechanical properties of dissimilar metal weld joint between VM12-SHC and X20 martensitic steels10.1016/j.promfg.2016.12.059 ↗
19. Corrosion testing of diffusion-coated steel in molten salt for concentrated solar power tower systems10.1016/j.surfcoat.2018.08.097 ↗
20. Corrosion monitoring of ferritic-martensitic steels in molten salt environments for CSP applications10.1063/1.5117552 ↗
21. Thermomechanical testing under operating conditions of A516Gr70 used for CSP storage tanks10.1016/j.solmat.2017.09.029 ↗
22. Effects of external stresses on hot corrosion behavior of stainless steel TP347HFG10.1016/j.corsci.2015.11.037 ↗
23. Evaluation on thermal and mechanical performance of the hot tank in the two-tank molten salt heat storage system10.1016/j.applthermaleng.2019.114775 ↗
24. Experimental study on the thermal stability of a new molten salt with low melting point for thermal energy storage applications10.1016/j.solmat.2017.12.001 ↗
25. Design and development of nitrate-nitrite based molten salts for concentrating solar power applications10.1016/j.solener.2019.06.010 ↗
26. Molten salts in the light of corrosion mitigation strategies and embedded with nanoparticles to enhance the thermophysical properties for CSP plants10.1016/j.solmat.2020.110768 ↗
27. Lithium in thermal energy storage: a state-of-the-art review10.1016/j.rser.2014.10.096 ↗
28. Advances in the development of latent heat storage materials based on inorganic lithium salts10.1016/j.solmat.2019.110344 ↗
29. Corrosion of AISI316 as containment material for latent heat thermal energy storage systems based on carbonates10.1016/j.solmat.2018.06.003 ↗
30. Corrosion behavior of SS316L in ternary Li2CO3–Na2CO3–K2CO3 eutectic mixture salt for concentrated solar power plants10.1016/j.solmat.2020.110679 ↗
31. Corrosion monitoring of 321H in contact with a quaternary molten salt for parabolic trough CSP plants10.1016/j.corsci.2020.109070 ↗
32. Corrosion behavior of eutectic molten salt solution on stainless steel 316L10.1016/j.sbspro.2015.06.465 ↗
33. Corrosion of alloys in high temperature molten-salt heat transfer fluids with air as the cover gas10.1016/j.solener.2019.09.015 ↗
34. Corrosion of steel alloys in eutectic NaCl+Na2CO3 at 700 °C and Li2CO3 + K2CO3 + Na2CO3 at 450 °C for thermal energy storage10.1016/j.solmat.2017.05.063 ↗
35. High-temperature corrosion of Cr–Mo steel in molten LiNO3–NaNO3–KNO3 eutectic salt for thermal energy storage10.1016/j.solmat.2014.10.007 ↗
36. Thermophysical, environmental, and compatibility properties of nitrate and nitrite containing molten salts for medium temperature CSP applications: a critical review10.1016/j.jeurceramsoc.2018.07.057 ↗
37. 2020 · 1
38. Electrochemical impedance studies of molten (0.9Na,0.1K)2SO4-induced hot corrosion of the Ni-based superalloy M38G at 900°C in air10.1016/j.electacta.2005.03.034 ↗
39. The role of temperature on the corrosion and passivation of type 310S stainless steel in eutectic (Li + K) carbonate melt10.1016/j.jpowsour.2006.04.068 ↗
40. Waste incineration corrosion processes: oxidation mechanisms by electrochemical impedance spectroscopy10.1002/maco.200804139 ↗
41. Evaluation of corrosion resistance of aluminium coating with and without annealing against molten carbonate using electrochemical impedance spectroscopy10.1016/j.jpowsour.2014.03.076 ↗
42. Corrosion evaluation of eutectic chloride molten salt for new generation of CSP plants. Part 2: materials screening performance10.1016/j.est.2020.101381 ↗
43. 2009
44. 2014
45. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
46. Evolution of corrosion scales on ASTM A36 and AISI 304L steels formed in exposure to molten Solar Salt: electrochemical study
47. Effect of mixture ratio on water uptake and corrosion performance of silicone-epoxy hybrid coatings coated 2024 Al-alloy10.1016/j.porgcoat.2014.09.009 ↗
48. Enhanced graphical representation of electrochemical impedance data10.1149/1.2168377 ↗
49. Corrosion performance of AISI-309 exposed to molten salts V2O5-Na2SO4 at 700 C applying EIS and Rp electrochemical techniques10.1155/2015/826759 ↗
50. An experimental study on the corrosion sensitivity of metal alloys for usage in PCM thermal energy storages10.1016/j.renene.2019.02.013 ↗
51. Corrosion assessment of 9Cr-1Mo steel in molten LiCl-KCl eutectic salt by electrochemical methods10.1016/j.jnucmat.2018.11.014 ↗
52. Electrochemical impedance studies of the initial-stage corrosion of 310S stainless steel beneath thin film of molten (0.62Li,0.38K)2CO3 at 650°C10.1016/j.corsci.2010.11.036 ↗
53. Sastri
54. High-temperature corrosion performance of austenitic stainless steels type AISI 316L and AISI 321H in molten Solar Salt10.1016/j.solener.2018.11.019 ↗
55. High-temperature and corrosion behavior of nitrate nitrite molten salt mixtures regarding their application in concentrating solar power plants10.1016/j.egypro.2015.03.071 ↗
56. Study of corrosion by Dynamic Gravimetric Analysis (DGA) methodology. Influence of chloride content in solar salt10.1016/j.solmat.2016.07.027 ↗
57. Improvement of the corrosion properties in ternary molten nitrate salts for direct energy storage in CSP plants10.1016/j.solener.2016.05.030 ↗
58. Corrosion and microstructure correlation in molten LiCl-KCl medium10.1007/s11661-010-0223-5 ↗
59. Leco · 1995 · 1
60. High temperature molten salt corrosion behavior of aluminide and nickel-aluminide coatings for heat storage in concentrated solar power plants10.1016/j.surfcoat.2018.05.081 ↗
61. Internal oxidation of Fe-Al alloys in a KCl-air atmosphere at 650° C10.1023/B:OXID.0000025337.64394.bf ↗
62. High temperature corrosion behavior on molten nitrate salt-based nanofluids for CSP plants10.1016/j.renene.2018.07.018 ↗
63. Corrosion and carburization behavior of heat-resistant steels in a high-temperature supercritical carbon dioxide environment10.1007/s11085-019-09917-x ↗
64. Review of the high-temperature oxidation of iron and carbon steels in air or oxygen10.1023/A:1023685905159 ↗
65. Molten salt corrosion mechanisms of nitrate based thermal energy storage materials for concentrated solar power plants: a review10.1016/j.solmat.2019.02.012 ↗
66. Stress corrosion cracking of 304L stainless steel in molten salts media10.1016/0010-938X(84)90014-3 ↗