Influence of operating conditions on the optical optimization of solar selective absorber coatings
Source abstract
Abstract
Abstract In concentrated solar power (CSP), selective solar absorber coatings increase absorbed solar flux (high solar absorptance AS) while reducing radiative losses (low thermal emittance EBB). Coating developers usually maximize the selective ratio As/EBB (highest As, lowest EBB). The solar-to-heat conversion (heliothermal) efficiency Rh of a solar absorber is however a more relevant optimization target. It is deduced from As and EBB, but is more sensitive to As. It also strongly depends on operating conditions, solar concentration ratio C and absorber temperature TA, radically varying between CSP technologies. This allows different optimal designs and leads to more efficient selective coatings, adapted to their specific application. In this paper, the influence of operating conditions on the optimal selective coating design is investigated. A popular selective coating design, W/W–Al2O3/Al2O3, was chosen as illustrative example. Coating structure and composition, i.e., cermet composition and layer thicknesses, were optimized to maximize Rh for a wide range of operating conditions: concentration ratios from 10 to 300, absorber temperatures from 50 to 550 °C. Optimal coating characteristics are illustrated on 3D maps over the entire (C, TA) range, showing the existence of three operating regions. Each region gives an optimization priority on either As, EBB or a combination of both, leading to specific optimized coating characteristics for each region, which should be considered when designing selective coatings for given operating conditions. Based on one example, this study provides a better understanding of the optimal design and use of selective coatings in the different operating conditions of CSP technologies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Concentrated solar power plants: review and design methodology10.1016/j.rser.2013.01.032 ↗
2. A review of solar collectors and thermal energy storage in solar thermal applications10.1016/j.apenergy.2012.11.051 ↗
3. Design of evacuated tube solar collector with heat pipe
4. Coatings for concentrating solar systems - a review10.1016/j.rser.2015.01.015 ↗
5. Kennedy · 2002 · 1
6. Progress in development of high-temperature solar selective coating
7. A review of cermet-based spectrally selective solar absorbers10.1039/c3ee43825b ↗
8. Trease
9. Review of high-temperature central receiver designs for concentrating solar power10.1016/j.rser.2013.08.099 ↗
10. Review of physical vapor deposited ( PVD ) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
11. A review of high-temperature selective absorbing coatings for solar thermal applications10.1016/j.jmat.2019.12.012 ↗
12. Enhanced spectral absorption of bilayer WOx/SiO2 solar selective absorber coatings via low vacuum pre-annealing10.1016/j.solmat.2019.110152 ↗
13. Scalable all-ceramic nanofilms as highly efficient and thermally stable selective solar absorbers10.1016/j.nanoen.2019.103947 ↗
14. High-temperature tolerance in WTi-Al2O3 cermet-based solar selective absorbing coatings with low thermal emissivity10.1016/j.nanoen.2017.05.036 ↗
15. Stability of W-Al2O3 cermet based solar coating for receiver tube operating at high temperature10.1016/j.solmat.2010.04.080 ↗
16. Solar selective absorbers based on Al2O3 : W cermets and AlSiN/AlSiON layers10.1016/j.solmat.2015.01.029 ↗
17. A review on thermal stability and high temperature induced ageing mechanisms of solar absorber coatings10.1016/j.rser.2016.09.083 ↗
18. Enhanced thermal stability of W-Ni-Al2O3 Cermet-based spectrally selective solar absorbers with tungsten infrared reflectors10.1002/aenm.201401042 ↗
19. Thin film coatings in solar−thermal power systems10.1116/1.568749 ↗
20. Solar thermal harvesting based on self-doped nanocermet: structural merits, design strategies and applications10.1016/j.rser.2020.110277 ↗
21. Optimization and preparation of Pt -Al2O3 double cermet as selective solar absorber coatings10.1016/j.jallcom.2015.12.201 ↗
22. Optical modeling of multilayered coatings based on SiC(N)H materials for their potential use as high-temperature solar selective absorbers10.1016/j.solmat.2013.06.030 ↗
23. Optical property and thermal stability of Mo/Mo-SiO2/SiO2 solar-selective coating prepared by magnestron sputtering10.1002/pssa.201026301 ↗
24. Optical properties and thermal stability of colored solar selective absorbing coatings with double-layer antireflection coatings10.1016/j.solener.2015.12.022 ↗
25. Werner
26. Metal-AlN cermet solar selective coatings deposited by direct current magnetron sputtering technology
27. Mid-infrared optical properties of thin films of aluminum oxide, titanium dioxide, silicon dioxide, aluminum nitride, and silicon nitride10.1364/AO.51.006789 ↗
28. Burkholder · 2009 · 1
29. Comprehensive simulation and optimization of porous SiO2 antireflective coating to improve glass solar transmittance for solar energy applications10.1016/j.solmat.2018.03.040 ↗
30. General transfert-matrix method for optical multilayer systems with coherent, partially coherent, and incoherent interference10.1364/AO.41.003978 ↗
31. Pulsed laser deposited alumina thin films10.1016/j.ceramint.2015.09.048 ↗
32. Optical properties of metallic films for vertical-cavity optoelectronic devices10.1364/AO.37.005271 ↗
33. Optical properties of Au, Ni, and Pb at submillimeter wavelengths10.1364/AO.26.000744 ↗
34. Parameters and method to evaluate the reflectance properties of reflector materials for concentrating solar power technology
35. Recent progress in high-temperature solar selective coatings10.1016/S0927-0248(99)00136-1 ↗
36. The effective medium approximations: some recent developments10.1006/spmi.1997.0524 ↗
37. Investigation of effective-medium models of microscopic surface roughness by spectroscopic ellipsometry
38. Ceramics for concentrated solar power (CSP): from thermophysical properties to solar absorbers10.1016/B978-0-08-102726-4.00003-X ↗
39. Effective-medium approximation for lattice random walks with long-range jumps10.1103/PhysRevE.94.012135 ↗
40. Description and availability of the SMARTS spectral model for photovoltaic applications
41. ASTM G173–03 · 2003
42. Planck · 1914
43. Optical characterization of TiAlNx/TiAlNy/Al2O3 tandem solar selective absorber coatings10.1016/j.solmat.2017.06.007 ↗
44. Scilab, Scilab v5.5.0, (n.d.).
45. Itskhokine · 2015
46. Nanometric multi-scale rough, transparent and anti-reflective ZnO superhydrophobic coatings on high temperature solar absorber surfaces10.1016/j.solmat.2012.06.031 ↗