Assisted passivation by a chemically grown SiO2 layer for p-type selective emitter-passivated emitter and rear cells
Source abstract
Abstract
Abstract This paper presents the development of industrial-sized p-type passivated emitter and rear cells (PERCs) with a selective emitter (SE) structure. We focus on different assisted passivation schemes and use nitric acid oxidation of silicon (NAOS) to form an ultrathin SiO2 layer. The results show that all I–V parameters of the PERCs are significantly modified when SiO2 is present on the front and/or rear sides of the cell. For front-emitter passivation by NAOS-SiO2, we observe an increase in the open-circuit voltage (Voc) and short-circuit current density (Jsc) and strong enhancement of the internal quantum efficiency (IQE) for short-wavelength photons. This can be attributed to the high level of chemical passivation, as indicated by the reduced interface trap density (Dit), due to the reduced Shockley–Read–Hall recombination. By contrast, all I–V parameters associated with SiO2 rear passivation decrease due to the increased Dit, which results in enhanced surface recombination. The different types of surface passivation for n-type (front) and p-type (rear) surfaces are presumably due to different doping surface concentrations. These results suggest that NAOS surface pretreatment is a very promising technique to improve the level of surface passivation and thereby enhance the performance of industrial-sized PERCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Advancements in Semiconductor Devices and Circuit Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. 20.8% PERC solar cell on 156 mm × 156 mm p-type multicrystalline silicon substrate10.1109/JPHOTOV.2015.2489881 ↗
2. Efficiency enhancement of i-PERC solar cells by implementation of a laser doped selective emitter10.1016/j.solmat.2014.11.028 ↗
3. 19.4%-efficient large-area fully screen-printed silicon solar cells10.1002/pssr.201105045 ↗
4. Assessment of the illumination dependency of Al2O3 and SiO2 rear-passivated p-type silicon solar cells10.1002/pssr.201206154 ↗
5. Very low surface recombination velocities on p-type silicon wafers passivated with a dielectric with fixed negative charge10.1016/j.solmat.2006.04.014 ↗
6. Analysis of the losses of industrial-type PERC solar cells10.1002/pssa.201600708 ↗
7. A. Rohatgi, M. Hilai, D.L. Meier, A. Ebong, C. Honsberg, A.F. Carrol, P. Hacke, Self-aligned self-doping selective emitter for screen-printed silicon solar cells, in: Proceedings of the 17th Eur. Photovoltaic Sol. Energy Conference Exhib., Munich, Germany, 2001, pp. 22–26.
8. Limitation of industrial phosphorus-diffused emitter by SRH recombination10.1016/j.egypro.2014.08.090 ↗
9. Status and prospects of Al2O3-based surface passivation schemes for silicon solar cells10.1116/1.4728205 ↗
10. Towards 20% efficient large-area screen-printed rear-passivated silicon solar cells10.1002/pip.1198 ↗
11. Rear side passivation of PERC-type solar cells by wet oxides grown from purified steam10.1002/pip.1020 ↗
12. Chemistry of Si-SiO2 interface trap annealing10.1063/1.340317 ↗
13. 22.8% efficient silicon solar cell10.1063/1.101596 ↗
14. Properties of purified direct steam grown silicon thermal oxides10.1016/j.solmat.2011.03.002 ↗
15. Minimizing lifetime degradation associated with thermal oxidation of upright randomly textured silicon surfaces10.1016/j.solmat.2005.03.008 ↗
16. High surface passivation quality and thermal stability of ALD Al2O3 on wet chemical grown ultra-thin SiO2 on silicon10.1016/j.egypro.2011.06.197 ↗
17. Nitric acid oxidation of Si to form ultrathin silicon dioxide layers with a low leakage current density10.1063/1.1621720 ↗
18. Spectroscopic observation of interface states of ultrathin silicon oxide10.1063/1.361472 ↗
19. Kobayashi · 1996 · 497
20. Ultrathin silicon dioxide layers with a low leakage current density formed by chemical oxidation of Si10.1063/1.1517723 ↗
21. Ultrathin SiO2 layer with an extremely low leakage current density formed in high concentration nitric acid10.1063/1.3130596 ↗
22. Cleaning solutions based on hydrogen peroxide for use in silicon semiconductor technology
23. Low-temperature surface passivation of silicon for solar cells10.1149/1.2096673 ↗
24. Influence of the oxidant on the chemical and field-effect passivation of Si by ALD Al2O310.1149/1.3501970 ↗
25. Effective surface passivation of crystalline silicon by rf sputtered aluminum oxide10.1002/pssr.200903140 ↗
26. Field-effect passivation of the SiO2 Si interface10.1063/1.370784 ↗
27. Excellent c-Si surface passivation by thermal atomic layer deposited aluminum oxide after industrial firing activation10.1088/0022-3727/46/38/385102 ↗
28. The study of thermal silicon dioxide electrets formed by corona discharge and rapid-thermal annealing10.1063/1.3559260 ↗
29. Contactless mobility measurements of inversion charge carriers on silicon substrates with SiO2 and HfO2 gate dielectrics10.1063/1.3373920 ↗
30. COCOS (Corona oxide characterization of semiconductor) non-contact metrology for gate dielectrics
31. The present status and recent advancements in corona-Kelvin non-contact electrical metrology of dielectrics for IC-manufacturing10.1149/1.2355694 ↗
32. Extremely low surface recombination velocities on low-resistivity n-type and p-type crystalline silicon using dynamically deposited remote plasma silicon nitride films10.1002/pip.2320 ↗
33. Activation energy of negative fixed charges in thermal ALD Al2O310.1063/1.4960097 ↗
34. The recombination parameter J010.1016/j.egypro.2014.08.073 ↗
35. An improved methodology for extracting the interface defect density of passivated silicon solar cells10.1109/JPHOTOV.2016.2576685 ↗
36. Contactless determination of current-voltage characteristics and minority-carrier lifetimes in semiconductors from quasi-steady-state photoconductance data10.1063/1.117723 ↗
37. D.E. Kane, R.M. Swanson, Measurement of the emitter saturation current by a contactless photoconductivity decay method, in: Proceedings of the 18th IEEE Photovoltaic Spec. Conference, Las Vegas, NV, USA, 1985, pp. 578–583.
38. Recombination in highly injected silicon10.1109/T-ED.1987.23095 ↗
39. Improved value for silicon intrinsic carrier concentration from 275 to 375 K10.1063/1.349645 ↗
40. Nitric acid pretreatment for the passivation of boron emitters for n-type base silicon solar cells10.1063/1.2870202 ↗
41. Improvement of minority carrier lifetime and Si solar cell characteristics by nitric acid oxidation method10.1149/2.024406jss ↗
42. Overview on SiN surface passivation of crystalline silicon solar cells10.1016/S0927-0248(00)00099-4 ↗
43. Highest-quality surface passivation of low-resistivity p-type silicon using stoichiometric PECVD silicon nitride10.1016/S0927-0248(00)00145-8 ↗
44. Firing stability of SiNy/SiNx stacks for the surface passivation of crystalline silicon solar cells10.1016/j.solmat.2011.09.051 ↗
45. Solar-cell collection efficiency and its variation with voltage10.1063/1.355842 ↗
46. Field effect passivation of high efficiency silicon solar cells10.1016/0927-0248(93)90075-E ↗
47. Statistics of the recombinations of holes and electrons10.1103/PhysRev.87.835 ↗
48. Electron-hole recombination in germanium10.1103/PhysRev.87.387 ↗
49. Implementation of selective emitter for industrial-sized PERCs using wet chemical etch-back process
50. Diffusion length determination in p-n junction diodes and solar cells10.1063/1.91891 ↗
51. P. Basore, Extended spectral analysis of internal quantum efficiency, in: Proceedings of the 23rd IEEE Photovoltaic Specialist Conference, New York, 1993, pp. 147–152.
52. T. Mochizuki, S. Joonwichien, J. Mitchell, K. Tanahashi, K. Shirasawa, H. Takato, Evaluation of rear surfaces of PERC solar cells using internal quantum efficiency mapping, in: Technical Digest Proceedings of the 26th International Photovoltaic Science and Engineering Conference, Singapore, 2016.
53. D.A. Clugston, P.A. Basore, PC1D version 5: 32-bit solar cell modeling on personal computers, in: Proceedings of the 26th IEEE Photovoltaic Specialists Conference, Anaheim, Calif, USA, 1997, pp. 207–210.
54. Parameters estimation of double diode solar cell model