journal article·2018-07Open access

Advanced light management techniques for two-terminal hybrid tandem solar cells

A.J. Blanker, P. Berendsen, N. Phung, Z.E.A.P. Vroon, M. Zeman, A.H.M. Smets

Abstract

Multi-junction solar cells are considered for various applications, as they tackle various loss mechanisms for single junction solar cells. These losses include thermalization and non-absorption below the band gap. In this work, a tandem configuration comprising copper-indium-gallium-di-selenide (CIGS) and hydrogenated amorphous silicon (a-Si:H) absorber layers is studied. Two main challenges are addressed in this work. Firstly, the natural roughness of CIGS is unfavorable for monolithically growing a high quality a-Si:H top cell. Some sharp textures in the CIGS induce shunts in the a-Si:H top junction, limiting the electrical performance of such a configuration. To smoothen this interface, the possibility of mechanically polishing the intermediate i-ZnO layer has been explored. The second challenge that is addressed, is the significant current mismatch in these tandem architectures. To enhance absorption in the current-limiting top cell, the ZnO:Al front electrode was textured by means of wet-etching the entire tandem stack. We demonstrated that one can manipulate the morphology of the random textures by varying the growth conditions of the ZnO:Al, leading to better light management in these devices.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Solar cell efficiency tables (version 34)10.1002/pip.911 ↗
2. Triple-junction thin-film silicon solar cell fabricated on periodically textured substrate with a stabilized efficiency of 13.6%10.1063/1.4921794 ↗
3. Quadruple-Junction thin-film silicon solar cells using four different absorber
4. High efficiency and high open-circuit voltage quadruple-junction silicon thin film solar cells for future electronic applications10.1039/C7EE00332C ↗
5. Organic tandem and multi-junction solar cells10.1002/adfm.200700517 ↗
6. An efficient triple-junction polymer solar cell having a power conversion efficiency exceeding 11%10.1002/adma.201402072 ↗
7. A 2-terminal perovskite/silicon multijunction solar cell enabled by a silicon tunnel junction10.1063/1.4914179 ↗
8. Realization of GaInP/Si dual-junction solar cells With 29.8% 1-Sun efficiency
9. Highly stable tandem solar cell monolithically integrating dye-sensitized and CIGS solar cells, nature10.1038/srep30868 ↗
10. “High-Efficiency Polycrystalline Thin Film Tandem Solar Cells10.1021/acs.jpclett.5b01108 ↗
11. Karlsruhe Institute of Technology, Record for perovskite/CIGS tandem solar module, SD, 27 September 2016.
12. Development of rear surface passivated Cu(In,Ga)Se2 thin film solar cells with nano-sized local rear point contacts10.1016/j.solmat.2013.07.025 ↗
13. The impact of reducing the thickness of electrodeposited stacked Cu/In/Ga layers on the performance of CIGS solar cells10.1016/j.solmat.2016.12.045 ↗
14. Babál · 2014
15. M. Boccard, Novel Micromorph Solar Cell Structures for Efficient Light Trapping and High-Quality Absorber Layers, PhD thesis, EPFL (2012).
16. P. Cuony, Optical Layers for Thin-film Silicon Solar Cells, PhD thesis, EPFL, 2011.10.1557/opl.2011.813 ↗
17. Investigation of chemicalmechanical polishing of zinc oxide thin films10.1016/j.apsusc.2011.01.116 ↗
18. Texture etched ZnO:Al coated glass substrates for silicon based thin film solar cells10.1016/S0040-6090(99)00085-1 ↗
19. Effect of surface roughness of ZnO:Al films on light scattering in hydrogenated amorphous silicon solar cells”10.1016/S0040-6090(03)00006-3 ↗
20. Modification of the Preston equation for the chemical mechanical polishing of copper10.1016/S0040-6090(98)00896-7 ↗