On elimination of inactive phosphorus in industrial POCl3 diffused emitters for high efficiency silicon solar cells
Source abstract
Abstract
Abstract It is compelling to eliminate inactive phosphorus in industrial POCl 3 diffused emitters for high efficiency silicon solar cells. Several approaches were reported to significantly reduce inactive phosphorus in the literature. However, the underlying physical mechanisms are not fully understood. In this work, we conduct a systematic investigation and fabricate eight emitters involving two POCl 3 :O 2 ratios at pre-deposition and both inert and oxidising scenarios at drive-in. Characterization techniques such as secondary ion mass spectrometry and X-ray photoelectron spectroscopy are carried out with an emphasis on the phosphosilicate glass. To provide a consistent interpretation of our results and those in the literature, we suggest a probable reaction, “free phosphorus oxidation”, as the dominant mechanism to unveil the role and impact of oxygen during POCl 3 diffusion. We further propose that various industrial POCl 3 emitters can be fabricated inactive phosphorus free without drive-in or a pre-grown oxide. Among the eight emitters, three emitters are free from inactive phosphorus with a sheet resistance range from 65 to 140 Ω/□, featuring a surface doping from 1 × 10 20 to 3 × 10 20 cm −3 and a remarkably low emitter saturation current density down to 51 fA/cm 2 .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Industrial diffusion of phosphorous n-type emitters for standard wafer-based silicon solar cells
2. Formation and composition of surface layers and solubility limits of phosphorus during diffusion in silicon10.1149/1.2426010 ↗
3. Sze · 2007
4. The oxidation of silicon in dry oxygen, wet oxygen, and steam10.1149/1.2425807 ↗
5. Predeposition in silicon as affected by the formation of orthorhombic SiP and cubic SiO2·P2O5 at the PSG‐Si interface10.1149/1.2132905 ↗
6. Diffusion of phosphorus in silicon oxide film10.1016/0022-3697(59)90229-X ↗
7. The system SiO2–P2O510.1111/j.1151-2916.1962.tb11186.x ↗
8. Shallow phosphorus diffusion profiles in silicon10.1109/PROC.1969.7325 ↗
9. I.B. Cooper, K. Tate, A.F. Carroll, K.R. Mikeska, R.C. Reedy, A. Rohatgi, Low resistance screen-printed Ag contacts to POCl3 emitters with low saturation current density for high efficiency Si solar cells, in: Proceedings of the 38th IEEE Photovoltaic Specialists Conference (PVSC), 2012, pp. 003359–003364.10.1109/PVSC.2012.6318292 ↗
10. Mechanism of performance limitations in heavily doped silicon devices10.1063/1.90426 ↗
11. Accurate interband-Auger-recombination rates in silicon10.1103/PhysRevB.42.5176 ↗
12. Assessment and parameterisation of Coulomb-enhanced Auger recombination coefficients in lowly injected crystalline silicon10.1063/1.366360 ↗
13. Surface recombination velocity of highly doped n‐type silicon10.1063/1.363250 ↗
14. Surface recombination velocity of phosphorus-diffused silicon solar cell emitters passivated with plasma enhanced chemical vapor deposited silicon nitride and thermal silicon oxide10.1063/1.1350633 ↗
15. Numerical modeling of highly doped Si:P emitters based on Fermi–Dirac statistics and self-consistent material parameters10.1063/1.1501743 ↗
16. Precise parameterization of the recombination velocity at passivated phosphorus doped surfaces10.1063/1.4939960 ↗
17. Dopant and carrier concentration in Si in equilibrium with monoclinic SiP precipitates10.1103/PhysRevB.53.7836 ↗
18. Kinetics of phosphorus predeposition in silicon using POCl310.1149/1.2134437 ↗
19. New method for determination of electrically inactive phosphorus in n-type emitters10.1016/j.egypro.2015.07.045 ↗
20. Heavily doped Si:P emitters of crystalline Si solar cells: recombination due to phosphorus precipitation10.1002/pssr.201409138 ↗
21. High concentration diffusivity and clustering of arsenic and phosphorus in silicon10.1063/1.367008 ↗
22. A model of clustering of phosphorus atoms in silicon10.1016/j.mseb.2005.06.014 ↗
23. Silicon phosphide precipitates in diffused silicon10.1149/1.2425949 ↗
24. SiP precipitation within the doped silicon lattice, concomitant with phosphorus predeposition10.1063/1.322549 ↗
25. Precipitation as the phenomenon responsible for the electrically inactive phosphorus in silicon10.1063/1.330646 ↗
26. Statistics of the recombinations of holes and electrons10.1103/PhysRev.87.835 ↗
27. Electron-hole recombination in germanium10.1103/PhysRev.87.387 ↗
28. The influence of diffusion-induced dislocations on high efficiency silicon solar cells10.1109/TED.2005.863535 ↗
29. Electrical and microstructural analysis of contact formation on lightly doped phosphorus emitters using thick-film Ag screen printing pastes10.1109/JPHOTOV.2013.2291313 ↗
30. Limitation of industrial phosphorus-diffused emitters by SRH recombination10.1016/j.egypro.2014.08.090 ↗
31. Reduction of excess phosphorus and elimination of defects in phosphorus emitter diffusions10.1149/1.2131544 ↗
32. Higher emitter quality by reducing inactive phosphorus10.1016/j.solmat.2012.06.007 ↗
33. A model for phosphosilicate glass deposition via POCl3 for control of phosphorus dose in Si10.1063/1.4771672 ↗
34. Relationships between diffusion parameters and phosphorus precipitation during the POCl3 diffusion process10.1016/j.egypro.2013.07.275 ↗
35. Optimizing phosphorus diffusion for photovoltaic applications: peak doping, inactive phosphorus, gettering, and contact formation10.1063/1.4949326 ↗
36. On phosphorus diffusion in silicon under oxidizing atmospheres10.1016/0038-1101(73)90056-7 ↗
37. Effect of oxygen ambient during phosphorous diffusion on silicon solar cell10.1063/1.4717513 ↗
38. Simplified front surface field formation for back contacted silicon solar cells10.1016/j.egypro.2013.07.278 ↗
39. Oxidation drive-in to improve industrial emitter performance by POCl3 diffusion10.1109/JPHOTOV.2016.2631300 ↗
40. A. Cuevas, A good recipe to make silicon solar cells, in: Proceedings of the 22nd IEEE Photovoltaic Specialists Conference, IEEE, 1991, pp. 466–470.10.1109/PVSC.1991.169259 ↗
41. Emitter saturation currents of 22fA/cm2 applied to industrial PERC cells approaching 22% conversion efficiency
42. P.A. Basore, J.M. Gee, M.E. Buck, W.K. Schubert, D.S. Ruby, in: Technical Digest of the International PVSEC-7, Nagoya, 1993, pp. 61–64.
43. Effect of oxide layers on the diffusion of phosphorus into silicon10.1063/1.1735568 ↗
44. R.A. Sinton, A. Cuevas, M. Stuckings, Quasi-steady-state photoconductance, a new method for solar cell material and device characterization, in: Proceedings of the 25th IEEE Photovoltaic Specialists Conference, 1996, pp. 457–460.10.1109/PVSC.1996.564042 ↗
45. D. Kane, R. Swanson, Measurement of the emitter saturation current by a contactless photoconductivity decay method, in: Proceedings of the 18th IEEE Photovoltaic Specialists Conference, 1985, pp. 578–583.
46. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
47. A. Blum, J. Swirhun, R. Sinton, A. Kimmerle, An updated analysis to the WCT-120 QSSPC measurement system using advanced device physics, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference and Exhibition, 2013.
48. Increased reliability for J0 analysis by QSSPC10.1016/j.egypro.2014.08.087 ↗
49. Reassessment of the intrinsic carrier density in crystalline silicon in view of band-gap narrowing10.1063/1.1529297 ↗
50. Finite-temperature full random-phase approximation model of band gap narrowing for silicon device simulation10.1063/1.368545 ↗
51. Redistribution of acceptor and donor impurities during thermal oxidation of silicon10.1063/1.1713825 ↗
52. Phosphorus pentoxide (P2O5) by XPS10.1116/11.20030115 ↗
53. XPS investigation of passive films on amorphous Fe-Cr alloys10.1016/0013-4686(92)85122-2 ↗
54. Modeling of stress-retarded thermal oxidation of nonplanar silicon structures for realization of nanoscale devices10.1109/LED.2010.2047375 ↗
55. Effect of the Si/SiO2 interface on self-diffusion of Si in semiconductor-grade SiO210.1063/1.1625775 ↗
56. A. Wolf, A. Kimmerle, S. Werner, S. Maier, U. Belledin, S. Meier, D. Biro, Status and perspective of emitter formation by POCl3-diffusion, in: Proceedings of the 31st European Photovoltaic Solar Energy Conference and Exhibition, 2015, pp. 414–419.
57. M. Muhlbauer, A. Piechulla, C. Voyer, M. Citro, R. Dahl, P. Fath, Industrial low-pressure phosphorus diffusion for high performance and excellent uniformity, in: Proceedings of the 26th European International Conference on Photovoltaic Solar Energy, 2011, pp. 5–9.
58. Silver thick-film contacts on highly doped n-type silicon emitters: structural and electronic properties of the interface10.1063/1.1562338 ↗
59. Physical understanding of printed thick-film front contacts of crystalline Si solar cells—review of existing models and recent developments10.1016/j.solmat.2006.03.040 ↗
60. L.K. Cheng, L. Liang, Z. Li, Nano-Ag colloids assisted tunneling mechanism for current conduction in front contact of crystalline Si solar cells, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference, IEEE, 2009, pp. 002344–002348.10.1109/PVSC.2009.5411326 ↗
61. Electron microscopy study of front-side Ag contact in crystalline Si solar cells10.1063/1.3086663 ↗
62. R.J. Young, A.F. Carroll, Advances in front-side thick film metallisations for silicon solar cells, in: Proceedings of the 16th European Photovoltaic Solar Energy Conference, 2000, pp. 1731–1734.
63. G. Schubert, G. Beaucarne, J. Hoornstra, R. Hoenig, M. Duerrschnabel, W. van Mierlo, Z. Aabdin, J. Bernhard, J. Biskupek, O. Eibl, U. Kaiser, J. Wilde, F. Clement, D. Biro, Proceedings of the Fourth Workshop on Metallization for Crystalline Silicon Solar Cells, the Nature of Screen Printed Front Side Silver Contacts – Results of the Project MikroSol, Energy Procedia, vol. 43, 2013, pp. 27–36.10.1016/j.egypro.2013.11.085 ↗