Hafnium oxide thin films as a barrier against copper diffusion in solar absorbers
Source abstract
Abstract
Abstract The thermal stability of copper substrate material used in solar thermal collectors was investigated with and without atomic layer deposited (ALD) hafnium oxide barrier films at temperatures of 200–400 °C. HfO2 films were studied as barriers against thermal diffusion of copper substrate atoms. The ALD HfO2 thin films were deposited in a thermal process at 200 °C using Tetrakis(Dimethylamido)Hafnium(Hf(NMe2)4) and H2O precursors, with 200, 400, and 600 cycles. The Cu substrates with and without HfO2 thin films were aged by means of heat treatment in air. The influence of the HfO2 barriers was determined by optical, microstructural, and morphological analyses before and after the ageing procedures. The optical performance of the HfO2 barriers as a part of solar absorber stack was modelled with CODE Coating Designer. The copper surface without a HfO2 barrier thin film oxidized significantly, which increased thermal emittance and surface roughness. 200 cycles of HfO2 deposition did not result in a completely continuous coating and only provided a little protection against oxidation. Films of 200 and 400 cycles gave continuous coverage and the thickest HfO2 thin film studied, which was deposited from 600 ALD cycles and had a thickness ~50 nm, prevented Cu oxidation and diffusion processes after 2 h heat treatment in air at 300 °C, and retained low thermal emissivity. At 400 °C, diffusion and formation of copper oxide hillocks were observed but the HfO2 thin film significantly retarded the degradation when compared to a Cu substrate without and with thinner barrier layers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · ZnO doping and properties · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
2. A review of strategies for the control of high temperature stagnation in solar collectors and systems10.1016/j.egypro.2012.11.090 ↗
3. European Solar Thermal Industry Federation (ESTIF): Solar Thermal Markets in Europe - Trends and Market Statistics 2010. Available at: 〈http://www.estif.org〉.
4. Influence of microstructure on temperature-induced ageing mechanisms of different solar absorber coatings10.1016/j.solmat.2013.09.026 ↗
5. Influence of temperature-induced copper diffusion on degradation of selective chromium oxy-nitride solar absorber coatings10.1016/j.solmat.2015.10.034 ↗
6. Temperature-induced ageing of solar absorbers on plain and anodized aluminium substrates10.1016/j.solmat.2014.12.006 ↗
7. R.W. Powell, C.Y. Ho, P.E. Liley. Thermal conductivity of selected materials, National standard reference data series - National Bureau of standards, 8, 20402,1966, pp. 1–169.10.6028/NBS.NSRDS.8 ↗
8. Cverna · 2002
9. Transition metals in silicon10.1007/BF00617708 ↗
10. Tantalum as a diffusion barrier between copper and silicon: failure mechanism and effect of nitrogen additions10.1063/1.350566 ↗
11. Ni and Ti diffusion barrier layers between Ti–Si–C and Ti–Si–C–Ag nanocomposite coatings and Cu-based substrates10.1016/j.surfcoat.2011.11.014 ↗
12. Investigation of defects in ultra-thin Al2O3 films deposited on pure copper by the atomic layer deposition technique10.1016/j.apsusc.2015.10.144 ↗
13. Low temperature oxidation of copper alloys - AEM and AFM characterization10.1007/s10853-006-0351-x ↗
14. A Tantalum diffusion barrier layer to improve the thermal stability ofAlxOy/Pt/AlxOy multilayer solar absorber10.1016/j.solener.2014.05.029 ↗
15. Structure, optical properties and thermal stability of pulsed sputter deposited high temperature HfOx/Mo/HfO2 solar selective absorbers10.1016/j.solmat.2010.04.073 ↗
16. Solar selective absorbers based on Al2O3:W cermets and AlSiN/AlSiON layers10.1016/j.solmat.2015.01.029 ↗
17. Aluminium and tantalum nitride barriers against copper diffusion in solar absorbers10.1080/02670844.2015.1121314 ↗
18. Atomic layer deposition HfO2 capping layer effect on porous low dielectric constant materials10.1016/j.apsusc.2015.02.070 ↗
19. Effect of film thickness on the breakdown temperature of atomic layer deposited ultrathin HfO2 and Al2O3 diffusion barriers in copper metallization10.1016/j.jcrysgro.2007.09.013 ↗
20. Atomic layer deposition of tantalum oxide thin films for their use as diffusion barriers in microelectronic devices10.1016/j.mee.2009.06.015 ↗
21. Electrical properties of Ta2O5 thin films deposited on Cu10.1016/S0040-6090(99)00873-1 ↗
22. Improvement of oxidation resistance of copper by atomic layer deposition10.1016/j.apsusc.2012.06.090 ↗
23. Nucleation and initial growth of atomic layer deposited titanium oxide determined by spectroscopic ellipsometry and the effect of pretreatment by surface barrier discharge10.1016/j.apsusc.2015.03.135 ↗
24. Atomic layer deposition: an overview10.1021/cr900056b ↗
25. Effects of substrate temperature on the structural, optical and resistive switching properties of HfO2 films10.1016/j.tsf.2016.04.016 ↗
26. A.J. Haemmerli, J.C. Doll, J. Provine, R.T. Howe, D. Goldhaber-Gordon, B.L. Pruitt. Ultra-thin atomic layer deposition films for corrosion resistance, 2013 Transducers & Eurosensors XXVII: the 17th International Conference on Solid-State Sensors, Actuators and Microsystems, 2013, pp. 1931–1934.10.1109/Transducers.2013.6627171 ↗
27. D. Franta, M. Kotilainen, R. Krumpolec, I. Ohlidal, Optical characterization of hafnia films deposited by ALD on copper cold-rolled sheets by difference ellipsometry, Applied Surface Science, 2016, 10.1016/j.apsusc.2016.12.164.10.1016/j.apsusc.2016.12.164 ↗
28. Growth of hafnium dioxide thin films by MOCVD using a new series of cyclopentadienyl hafnium compounds10.1002/cvde.200706596 ↗
29. Selective atomic layer deposition of HfO2 on copper patterned silicon substrates10.1063/1.3428771 ↗
30. Influence of a metallic nickel interlayer on the performance of solar absorber coatings based on black nickel electrodeposited onto copper10.1016/j.electacta.2016.07.125 ↗
31. Structure, optical properties and thermal stability of Al2O3-WC nanocomposite ceramic spectrally selective solar absorbers10.1016/j.optmat.2016.05.037 ↗
32. Graded selective coatings based on chromium and titanium oxynitride10.1016/S0040-6090(03)00967-2 ↗
33. Growth mode evolution of hafnium oxide by atomic layer deposition10.1116/1.4832224 ↗