Degradation effects of maritime atmosphere on metallic components of solar collectors
Source abstract
Abstract
Abstract The influence of mixed maritime atmosphere on the degradation of metallic components of exposed solar thermal collectors was studied. Corrosion measurements of standard metal samples (unalloyed carbon steel, zinc, copper and aluminum) were performed according to ISO 9226/1992 and ISO 9223/2012 with two different test set-ups; one in the open atmosphere, the other inside a commercial flat-plate thermal collector. Moreover, the influence of defined microclimatic conditions inside the thermal collector on the durability of different absorber surfaces was investigated. The results show extremely high corrosion rates in the open atmosphere for all exposed metals in contrast to the samples inside the solar thermal collector, where high corrosivity was only detected for amorphous metals. The results of optical measurements of the exposed absorber samples show a very good stability of the materials. Additionally, different analytical methods were used for the characterization of corrosion products. This information can be used for the optimization of accelerated aging tests for absorber materials with respect to corrosive environment and salt content.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Qualification test procedure for solar absorber surface durability10.1016/S0927-0248(99)00111-7 ↗
2. ISO 10062:2006, Corrosion Tests in Artificial Atmosphere at Very Low Concentrations of Polluting Gas(es), 2006.
3. Comparison between predicted and actually observed in-service degradation of a nickel pigmented anodized aluminium absorber coating for solar DHW systems10.1016/S0927-0248(99)00112-9 ↗
4. Atmospheric corrosion of materials
5. Quellen der Luftschadstoffe | Umweltbundesamt, 2015. 〈http://www.umweltbundesamt.de/themen/luft/emissionen-von-luftschadstoffen/quellen-der-luftschadstoffe〉 (accessed 16.06.15).
6. K. Slamova, Korrosion als Stressfaktor für Materialien und Kollektoren, in: Gesellschaft für Umweltsimulation (Ed.), Umwelteinflüsse Erfassen Simulieren Bewerten 44 Jahrestag, GUS 2015 25 März-27 März 2015 Stutensee Ortstl, Blankenloch Festhalle, Gesellschaft für Umweltsimulation e.V, Pfinztal, 2015.
7. B. Carlsson, U. Frei, M. Koehl, K. Moeller, Accelerated life testing of solar energy materials, Swedish National Testing and Research Institute, 1994.
8. ITC, 2015. 〈http://www.itccanarias.org/web/〉 (accessed 30.06.15).
9. Herrmann · 2014
10. ISO 9226:2012, Corrosion of Metals and Alloys-Corrosivity of Atmospheres-Determination of Corrosion Rate of Standard Specimens for the Evaluation of Corrosivity, 2012.
11. ISO 9223:2012, Corrosion of Metals and Alloys-Corrosivity of Atmospheres-Classification, Determination and Estimation, 2012.
12. ISO 9225:1992, Corrosion of Metals and Alloys-Corrosivity of Atmospheres-Measurement of Pollution, 1992.
13. Interferenzen an regellos orientierten Teilchen im Röntgenlicht. I
14. The reflection of x-rays by crystals10.1098/rspa.1913.0040 ↗
15. Quantitative surface analysis by Auger and x-ray photoelectron spectroscopy10.1016/0079-6816(96)00008-1 ↗
16. ASTM E891-87(1992), Tables for Terrestrial Direct Normal Solar Spectral Irradiance Tables for Air Mass 1.5 (Withdrawn 1999), 1992.
17. Outdoor and indoor atmospheric corrosion of non-ferrous metals10.1016/S0010-938X(99)00135-3 ↗
18. Atmospheric corrosion rates, time-of-wetness and relative humidity10.1002/maco.19790300105 ↗
19. Looking back on contributions in the field of atmospheric corrosion offered by the MICAT Ibero-American testing network10.1155/2012/824365 ↗
20. Time of wetness in tropical climate: considerations on the estimation of TOW according to ISO 9223 standard10.1016/j.corsci.2007.06.012 ↗
21. The generation of surface roughness during slurry erosion-corrosion and its effect on the pitting potential10.1016/S0010-938X(96)00066-2 ↗
22. G. Kunkel (Ed.), Biogeography and Ecology in the Canary Islands, Springer Netherlands, Dordrecht. 〈http://link.springer.com/10.1007/978-94-010-1566-0〉, 1976 (accessed 14.07.15).
23. XRD and SEM studies of the layer of corrosion products for carbon steel in various different environments in the province of Las Palmas (The Canary Islands, Spain)10.1016/S0010-938X(02)00047-1 ↗
24. W.B. Koldehoff, Solar thermal markets in Europe 2009, Sonne Wind, 2010, pp. 1–65.
25. Chloride ion interactions with oxide-covered aluminum leading to pitting corrosion: a review10.1149/2.1011409jes ↗
26. Atmospheric corrosion of galvanized steel and aluminium in marine and marine-industrial environments of Saudi Arabia10.1002/maco.200704075 ↗
27. The effect of atmospheric pollution on materials damage10.1002/maco.201206708 ↗
28. The effect of environmental and meteorological variables on atmospheric corrosion of carbon steel, copper, zinc and aluminium in a limited geographic zone with different types of environment10.1016/S0010-938X(02)00081-1 ↗
29. Atmospheric corrosion in the Gulf of México10.1023/A:1012688003125 ↗
30. Long-term atmospheric corrosion of mild steel10.1016/j.corsci.2010.10.007 ↗
31. Atmospheric corrosion of carbon steel at marine sites in Saudi Arabia10.1002/maco.200905300 ↗
32. The substitution of chloride ions to OH−-ions in the akaganeite beta ferric oxyhydroxide studied by Mössbauer effect10.1007/BF02405765 ↗
33. The evolution of outdoor copper patina10.1016/S0010-938X(01)00081-6 ↗
34. Morphological study of 16-year patinas formed on copper in a wide range of atmospheric exposures10.1016/j.corsci.2007.05.030 ↗
35. Effect of carbon dioxide on sodium chloride-induced atmospheric corrosion of copper10.1149/1.2098327 ↗
36. Some aspects of the atmospheric corrosion of copper in the presence of sodium chloride10.1149/1.1838422 ↗
37. Long-term atmospheric corrosion of zinc10.1016/j.corsci.2006.08.003 ↗
38. Characterization of the corrosion products formed on zinc in archipelagic subtropical environments10.1016/S1452-3981(23)16580-1 ↗
39. ISO/TR 16335:2013(E), Corrosion of Metals and Alloys-Corrosion Tests in Artificial Atmospheres-Guidelines for Selection of Accelerated Corrosion Test for Product Qualification, 2013.