journal article·2011-12

Effect of edge junction isolation on the performance of laser doped selective emitter solar cells

Brett Hallam, Stuart Wenham, Haeseok Lee, Eunjoo Lee, Hyunwoo Lee, Jisun Kim, Jeoungeun Shin

Publisher page

Abstract

Abstract The effect of laser and chemical edge junction isolation on electrical performance of industrially manufactured laser doped selective emitter solar cells with light induced plated n-type contacts is investigated in this work. Directly after the formation of the aluminium back surface field, photoluminescence images indicates that laser edge junction isolation causes substantial damage around the perimeter of the cell, extending several millimeters from the laser edge isolation groove. On finished devices, regions of high series resistance are evident around the perimeter, caused by parasitic plating nucleating in the damaged laser grooved region which induce shunting and inhibits further plating taking place in the surrounding regions. The use of chemical edge junction isolation eliminates both of these issues and can result in efficiency gains of more than 2% absolute compared to that fabricated using laser edge isolation, suggesting a far superior method of edge junction isolation for the industrial manufacture of laser doped selective emitter solar cells with light induced plated contacts.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and interfaces · Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. R. Patel, J. Bovatsek, A. Sugianto, B. Hallam, B. Tjahjono, S. Wenham, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference, Valencia, 2010.
2. A. Sugianto, J. Bovatsek, S. Wenham, B. Tjahjono, G. Xu, Y. Yao, B. Hallam, X. Bai, N. Kuepper, C. Chong, R. Patel, in: Proceedings of the 35th IEEE Photovoltaics Specialist Conference, Hawaii, 2010, pp. 689–694.
3. B. Tjahjono, M. Yang, C. Lan, J. Ting, A. Sugianto, H. Ho, N. Kuepper, B. Beilby, T. Szpitalak, S. Wenham, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference, Valencia, 2010.
4. H. Lee, E. Lee, J. Kim, J. Shin, C.J. Kim, J.I. Kim, J. Shim, D. Oh, C.K.J. Seo, J. Kong, H. Lee, S. Lee, B. Hallam, S. Wenham, To be presented at the 26th European Photovoltaic Solar Energy Conference, Hamburg, 2011.
5. S.R. Wenham, M.A. Green, Self Aligning Method for Forming A Selective Emitter and Metallization in a Solar Cell, 2002, US Patent No. 6429039, August 2002.
6. UNSW ARC Photovoltaic Centre of Excellence, ARC Photovoltaic Centre of Excellence, 2009 Annual Report, School of Photovoltaic and Renewable Energy Engineering, UNSW, 2009.
7. Rena, Wet Chemical Edge Isolation for Solar Cells, EuroAsia Semiconductor Magazine, Mid September, 2007.
8. J. Ji, Z. Shi, Y. Qin, A Method for Processing a Semiconductor Substrate Surface and a Chemical Processing Device for the Semiconductor Substrate Surface, 2009, WO Patent No. 2009/009,931, January 2009.
9. T. Lauermann, A. Dastgheib-Shirazi, F. Book, B. Raabe, G. Hahn, H. Haverkamp, D. Habermann, C. Demberger, C. Schmid, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, Hamburg, 2009.
10. S. Chunduri, Photon International, November 2009, 2003, pp. 108–116.
11. S. Hallam, B. Wenham, in: Proceedings of the 37th IEEE Photovoltaic Specialist Conference, Seattle, 2011.