journal article·2013-06Open access

Investigating manufacturing options for industrial PERL-type Si solar cells

Antonio Cacciato, Filip Duerinckx, Kasper Baert, Matthieu Moors, Tom Caremans, Guido Leys, Koen De Keersmaecker, Jozef Szlufcik

Abstract

Abstract In this paper the tradeoff between process control and cost-effectiveness for PERL-type process flows is investigated. Three aspects are considered: (1) whether a surface pre-treatment (for example special cleans and/or oxidation) prior to the deposition of the Al2O3-based rear-side passivation stack has to be added to the flow; (2) the quantification of the impact on cell parameters of skipping the rear-side polishing and/or the Al2O3 deposition; and (3) the possibility of replacing Al paste with PVD Al for rear side metallization. It is found that: (1) SPM-like cleans or thermal oxidation prior to Al2O3 deposition are useful steps to guarantee a stable Al2O3-based passivation process. (2) The efficiency drops by more than 1% by skipping the polishing, but only ≈0.15% by removing the Al2O3 from the passivation stack. Therefore, while rear-side polishing appears to be a necessary step for PERC/PERL technologies, the insertion of Al2O3 in the passivation stack could be traded off for a reduced production cost, depending on the (company-specific) details of cost-calculations. (3) Replacing Al paste with PVD Al for rear side metallization results in a deteriorated reflectance. The effect is larger for thinner passivation stacks. Although less advantageous in term of material costs with respect to PVD Al, screen-printed Al would therefore be the preferred choice for PERL cells featuring thin passivation stacks.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. 24% efficient silicon solar cells10.1063/1.103610 ↗
2. 24.5% efficiency silicon PERT cells on MCZ substrates and 24.7% Efficiency PERL cells on FZ substrates10.1002/(SICI)1099-159X(199911/12)7:6<471::AID-PIP298>3.0.CO;2-7 ↗
3. H.F.W. Dekkers, Study and Optimization of Dry Process Technologies for Thin Crystalline Silicon Solar Cell Manufacturing, Ph.D., Katholieke Universiteit Leuven, Belgium, 2008, ISBN 978-90-5682-954-4.
4. Recent advances of high-efficiency single crystalline silicon solar cells in processing technologies and substrate materials10.1016/j.solmat.2004.01.005 ↗
5. B. Vermang, A. Rothschild, K. Kenis1, K. Wostyn, T. Bearda, A. Racz, X. Loozen, J. John, P. Mertens, J. Poortmans, R. Mertens, Surface passivation for Si solar cells: a combination of advanced surface cleaning and thermal atomic deposition of Al2O3, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition/5th World Conference on Photovoltaic Energy Conversion, Valencia, 6–10 September 2010.
6. Very low surface recombination velocities on p-type silicon wafers passivated with a dielectric with fixed negative charge10.1016/j.solmat.2006.04.014 ↗
7. D. Kania, P. Saint-Cast, D. Wagenmann, M. Hofmann, J. Rentsch, R. Preu, Industrial negatively charged c-Si surface passivation by inline PECVD AlOx, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, Hamburg, 21–25 September 2009, pp. 2275–2278.
8. R. Preu, S.W. Glunz, S. Schäfer, R. Lüdemann, W. Wettling, W. Pfleging, Laser ablation—a new low-cost approach for passivated rear contact formation in crystalline silicon solar cell technology, in: Proceedings of the 16th EPVSEC, Glasgow, UK, 2000, pp. 1181–1184.
9. E. Schneiderlöchner, R. Preu, R. Lüdemann, S.W. Glunz, G. Willeke, Laser-fired contacts (LFC), in: Proceedings of the 17th EPVSEC, Munich, Germany, 2001, pp. 1303–1306.
10. L. Gautero, D. Kania, J. Seiffe, A. Knorz, J. Specht, J. Nekarda, M. Hofmann, J. Rentsch, J.M. Sallese, R. Preu, Comparison of different rear contacting approaches for industrial PERC solar cells on Mc–Si Wafer, in: Proceedings of the 25th EPVSEC, Valencia, Spain, 2010, pp. 1328–1331.
11. F.S. Grasso, L. Gautero, J. Rentsch, R. Lanzafame, Characterization of aluminum screen-printed local contacts, in: Proceedings of the 2rd Metallization Workshop for Crystalline Solar Cells, Konstanz, Germany, 2011, pp. 15–21.
12. A. Uruena, J. John, G. Beaucarne, P. Choulat, P. Eyben, G. Agostinelli, E. Van Kerschaver, J. Poortmans, R. Mertens, Local Al-alloyed contacts for next generation Si solar cells, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, Hamburg, 21–25 September 2009, pp. 1483–1486.
13. Silicon diffusion in aluminum for rear passivated solar cells10.1063/1.3579541 ↗
14. Investigation of aluminum-alloyed local contacts for rear surface-passivated silicon solar cells10.1109/JPHOTOV.2011.2161864 ↗
15. Aluminum alloying in local contacts areas on dielectrically passivated rear surfaces of silicon solar cells10.1109/LED.2011.2143385 ↗
16. Industrial PERL-type solar cells exceeding 19% with screen-printed contacts and homogeneous emitter10.1016/j.solmat.2012.05.006 ↗
17. F. Duerinckx, M. Moors, T. Caremans, K. Baert, A. Cacciato, G. Leys, J. Szlufcik, Accumulation versus inversion layer passivation on +19% screenprinted industrial crystalline silicon solar cells, in: Proceedings of the EU PVSEC, Frankfurt, Germany, 2012.
18. A. Cacciato, F. Duerinckx, K. Baert, M. Moors, T. Caremans, G. Leys, M. Mrcarica, E. Picard, A. Ristow, J. Szlufcik, Cost-effective PERL-type Si solar cells with efficiencies exceeding 19.5%, IEEE Journal of Photovoltaics, PP (99), 2013, 1–710.1109/JPHOTOV.2012.2231725 ↗
19. C. Schwab, B. Thaidigsmann, M. Linse, A. Wolf, F. Clement, A. Prince, R. Young, P. Weigand, Screen-printed Al-pastes for LFC solar cells, in: Proceedings of the 3rd Metallization Workshop for Crystalline Solar Cells, Charleroi, Belgium, 2011.
20. E.H.A. Granneman,P. Vermont, V. Kuznetsov, M. Coolen, K. Vanormelingen, Proceedings of the 5th World Conference on Solar Energy Conversion, 2010, p. 1640.
21. Silicon surface passivation by atomic layer deposited Al2O310.1063/1.2963707 ↗
22. Negative charge and charging dynamics in Al2O3 films on Si characterized by second-harmonic generation10.1063/1.2985906 ↗
23. On the c-Si surface passivation mechanism by negative-charge-dielectric Al2O310.1063/1.3021091 ↗
24. Hydrogen induced passivation of Si interfaces by Al2O3 films and SiO2/Al2O3 stacks10.1063/1.3497014 ↗
25. Electronic and chemical properties of the c-Si/Al2O3 interface10.1063/1.3587227 ↗
26. Experimental evidence of parasitic shunting in silicon nitride rear surface passivated solar cells10.1002/pip.420 ↗
27. Field effect passivation of the SiO2/Si interface10.1063/1.370784 ↗
28. L. Breitenstein, A. Richter, M. Hermle, W. Warta, Studies on wet-chemical surface conditioning for Al2O3 passivation layers deposited with ALD, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, Hamburg, 5–9 September 2011.
29. J. Horzel, A. Lorenz, E. Cornagliotti, A. Uruena De Castro, J. John, M. Izaaryene, D. Habermann, P. Jaffrennou, J. Penaud, Development of rear side polishing adapted to advanced solar cell concepts, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, Hamburg, 5–9 September 2011.
30. E. Cornagliotti, A. Uruena De Castro, J. Horzel, J. John, L. Tous, D. Hendrickx, V. Prajapati, S. Singh, R. Hoyer, F. Delahaye, K. Weise, D. Queisser, H. Nussbaumer, J. Poortmans, How much rear side polishing is required? A study on the impact of rear side polishing in perc solar cells, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference, Frankfurt, 24–28 September 2012, pp. 561–566.10.1016/j.egypro.2012.07.110 ↗
31. C. Kranz, S. Wyczanowski, S. Dorn, K. Weise, C. Klein, K. Bothe, T. Dullweber, R. Brendel, Impact of the rear surface roughness on industrial-type PERC solar cells, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference, Frankfurt, 24–28 September 2012, pp. 557–560.
32. J. Nekarda, D. Reinwand, P. Hartmann, R. Preu, Industrial inline PVD metallization for silicon solar cells with laser fired contacts leading to 21.8% efficiency, in: Proceedings of the 2nd Workshop on Metallization, Constance, 14–15 April, 2010, pp. 52–58, 〈http://www.secondmetal.eu/fileadmin/secondmetal/docs/program_secondmetal.pdf〉.