Influence of copper concentration in solutions on the growth mechanism and performance of electrodeposited Cu(In,Al)Se2 solar cells
Source abstract
Abstract
Abstract We conducted a chronoamperometric study to observe the electrochemical behaviors of the nucleation mechanism of electrodeposited Cu(In,Al)Se 2 films. A change from instantaneous nucleation to progressive nucleation was observed by increasing the copper concentration. SEM and EDS analyses demonstrated that the surface morphologies and chemical compositions of precursor and post-annealed Cu(In,Al)Se 2 films were influenced by the nucleation mechanism. They exhibited that Cu(In,Al)Se 2 films had roughly cauliflower-like and triangular structures with Cu-poor composition at the instantaneous nucleation mechanism, whereas smooth and round structures with Cu-rich composition at the progressive nucleation mechanism. Additionally, the quality, growth orientation, composition phase, and optical energy band gap of Cu(In,Al)Se 2 films were examined using X-ray diffraction (XRD) patterns, Raman spectra, and ( αhν ) 2 vs. hν plots (UV–vis). Thereafter, the performances of rudimentary Cu(In,Al)Se 2 solar cells fabricated at various copper concentrations were discussed, the conversion efficiency of electrodeposited Cu(In,Al)Se 2 solar cells were unpublished in previous literatures. Our studies demonstrated that the performances of Cu(In,Al)Se 2 solar cells were significantly related to the surface morphology and composition of Cu(In,Al)Se 2 absorber layer. The highest conversion efficiency of Cu(In,Al)Se 2 solar cells fabricated at a 2-mM copper concentration was 1.96% with open-circuit voltage, short-circuit current, fill factor, R sh and R s values of 0.189 V, 29.21 mA/cm 2 , 35.4%, 125 Ω and 2.82 Ω, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Compositional and optoelectronic properties of CIS and CIGS thin films formed by electrodeposition10.1016/S0927-0248(99)00033-1 ↗
2. CuIn1−xAlxSe2 thin films and solar cells10.1063/1.1476966 ↗
3. Wide-bandgap CuIn1−xAlxSe2 thin films deposited on transparent conducting oxides10.1016/j.solmat.2010.03.022 ↗
4. New world record efficiency for Cu(In,Ga) Se2 thin‐film solar cells beyond 20%10.1002/pip.1078 ↗
5. Effect of composition gradient in Cu(In,Al)Se2 solar cells10.1016/j.solmat.2008.11.007 ↗
6. Growth of single-phase Cu(In,Al)Se2 photoabsorbing films by selenization using diethylselenide10.1016/j.tsf.2008.10.083 ↗
7. Effect of Al addition on the characteristics of Cu(In,Al)Se2 solar cells10.1016/j.jcrysgro.2008.09.135 ↗
8. Formation of CuInAlSe2 film with double graded bandgap using Mo(Al) back contact10.1016/j.solmat.2010.04.046 ↗
9. CuIn1−xAlxSe2 thin films obtained by selenization of evaporated metallic precursor layers10.1016/j.tsf.2008.10.095 ↗
10. Formation of CuIn1−xAlxSe2 thin films by selenization of metallic precursors in Se vapor10.4028/www.scientific.net/SSP.124-126.975 ↗
11. Growth and characterization of electrodeposited Cu(In,Al)Se2 thin films10.1016/j.tsf.2011.03.126 ↗
12. High-efficiency solar cells based on Cu(InAl)Se2 thin films10.1063/1.1499990 ↗
13. Crystallization of In–Se/CuInSe2 thin-film stack by sequential electrodeposition and annealing10.1016/j.jcrysgro.2008.09.090 ↗
14. Properties of CuInxGa1−xSe2 thin films grown from electrodeposited precursors with different levels of selenium content10.1016/j.cap.2009.10.015 ↗
15. Effect of bath temperature and annealing on the formation of CuInSe210.1016/j.solmat.2008.10.014 ↗
16. Electrodeposited and selenized CIGS thin films for solar cells10.1016/j.jnoncrysol.2007.02.097 ↗
17. Effect of Cu/In ratio in crystal growth of cuinse2 thin films fabricated by reduction and selenization using Cu and In2O3 paste materials10.1143/JJAP.50.121201 ↗
18. Thoughts on the microstructure of polycrystalline thin film CuInSe2 and its impact on material and device performance10.1016/0379-6787(91)90034-M ↗
19. A study of electrodeposition of CuInSe2 thin films with triethanolamine as the complexing agent10.1016/j.apsusc.2008.11.081 ↗
20. Cyclic voltammetry study of electrodeposition of Cu(In,Ga)Se2 thin films10.1016/j.electacta.2008.12.016 ↗
21. One-step electrodeposition of Cu2−xSe and CuInSe2 thin films by the induced Co‐deposition mechanism10.1149/1.1393317 ↗
22. Cyclic voltammetric study and nucleation of electrodeposited Cu(In,Al)Se2 thin films with sodium dodecyl sulfate additive10.1149/2.029304jes ↗
23. Theoretical and experimental studies of multiple nucleation10.1016/0013-4686(83)85163-9 ↗
24. Electrodeposition of copper: the nucleation mechanisms10.1016/S0013-4686(02)00161-5 ↗
25. Reaction and nucleation mechanisms of copper electrodeposition from ammoniacal solutions on vitreous carbon10.1016/j.electacta.2005.02.012 ↗
26. Electrodeposition of CuInxGa1−xSe2 thin films10.1016/S0927-0248(99)00010-0 ↗
27. Influence of annealing temperature on the properties of Cu(In,Ga)Se2 thin films by thermal crystallization in Se vapor10.1016/S0927-0248(97)00091-3 ↗
28. Controlling growth chemistry and morphology of single-bath electrodeposited Cu(In,Ga)Se2 thin films for photovoltaic application10.1149/1.2186764 ↗
29. Effects of residual copper selenide on CuInGaSe2 solar cells10.1016/j.sse.2010.11.019 ↗
30. B. Dimmler, H. Dittrich, H.W. Schock, Structure and morphology of evaporated bilayer and selenized CuInSe2 films. In: Proceedings of the 20th IEEE Photovoltaic Specialists Conference, New York, 1988, pp. 1426–1430.10.1109/PVSC.1988.105945 ↗
31. Fabrication of Cu(In,Ga)Se2 thin films by a combination of mechanochemical and screen-printing/sintering processes10.1002/pssa.200669652 ↗
32. In and Al composition in nano-Cu(In,Al)Se2 thin films from XRD and transmittance spectra10.1016/j.mseb.2007.03.011 ↗
33. Real-time Raman scattering analysis of the electrochemical growth of CuInSe2 precursors for CuIn(S,Se)2 solar cells10.1149/1.3559162 ↗
34. Incorporation mechanism of indium and gallium during electrodeposition of Cu(In,Ga)Se2 thin film10.1149/2.059112jes ↗
35. Raman investigations of Cu(In,Ga)Se2 thin films with various copper contents10.1016/j.tsf.2008.07.011 ↗
36. In-depth resolved Raman scattering analysis of secondary phases in Cu-poor CuInSe2 based thin films10.1063/1.3236770 ↗
37. Growth of highly (111) oriented CuIn0.75Al0.25Se2 thin films10.1016/j.mssp.2010.10.017 ↗
38. Formation of CuIn1−xAlxSe2 thin films studied by Raman scattering10.1016/j.tsf.2011.02.030 ↗
39. Raman microprobe characterization of electrodeposited S-rich CuIn(S,Se)2 for photovoltaic applications: microstructural analysis10.1063/1.2734103 ↗
40. Lattice vibrations of CuInSe2 and CuGaSe2 by Raman microspectrometry10.1063/1.352195 ↗
41. One-step electrodeposited CuInSe2 thin films studied by Raman spectroscopy10.1016/j.tsf.2007.02.109 ↗
42. Raman scattering characterisation of electrochemical growth of CuInSe2 nanocrystalline thin films for photovoltaic applications: surface and in-depth analysis10.1002/sia.2692 ↗
43. Optical and electrical properties of SnO2 thin films in relation to their stoichiometric deviation and their crystalline structure10.1016/0040-6090(77)90395-9 ↗
44. Green · 1982