Effect of porous Si and an etch-back process on the performance of a selective emitter solar cell
Source abstract
Abstract
Abstract This paper analyzes the effects of a wet chemical etch-back process and the porous Si that is formed during the etch-back process on the optical and electrical performances of a selective emitter solar cell. In this paper, we assert that the sheet resistance of the emitter after the etch-back process could be controlled by monitoring the reflectivity of the porous Si at 500 nm. The scanning electron microscope (SEM) photographs of the porous Si reveal that the thickness of the porous Si is not entirely homogenous, gradually decreasing from the top of the pyramid to the valley. The etch-back process results in pyramid morphology variations that increase the reflectivity of the texture. After removing the porous Si, the minority carrier lifetime of the emitter increases significantly. Because of this effect, the conversion efficiency of the SE solar cell is 0.27% higher than that of the regular homogenous emitter solar cells. Although this approach increases the texture reflectivity, the etch-back process greatly improves the internal quantum efficiency in the short wavelength range, which in turn increases the short-circuit current density by a large amount. The calculated J sc shows that the peak gain of the short-circuit current density occurs at approximately 400 nm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon Nanostructures and Photoluminescence · Nanowire Synthesis and Applications · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. H.H. Kuehnlein, N. Koesterke, and G. Cimiotti, Next Generation of Front Grid Metallization: LCP Selective Emitter Combined with Ni–Cu–Sn Direct Plating on Silicon, 24th EUPVSEC, Hamburg, Germany, 2009, 1712–1714.
2. T. Röder, et al., 0.4% Absolute Efficiency Gain of Industrial Solar Cell by Laser Doped Selective Emitter, 34th IEEE PVSC, 2009, 871–873.10.1109/PVSC.2009.5411149 ↗
3. C. Dunsky, Laser-Doped Selective Emitters (LDSE) With a Green CW Laser, Industrial Laser Applications Lab, No. 9. 2011
4. H. Antoniadis, et al., All Screen Printed Mass Produced Silicon Ink Selective Emitter Solar Cell, 35th IEEE PVSC, 2010, 1193–1196.10.1109/PVSC.2010.5614092 ↗
5. High efficiency selective emitter cell using patterned ion implantation10.1016/j.egypro.2011.06.205 ↗
6. B. Tjahjono, et al., Optimizing Selective Emitter Technology in One Year of Full Scale Production, 26th EUPVSEC, 2011, 901–905.
7. Chemical etching of silicon, a temperature study in the acid system10.1149/1.2428090 ↗
8. Porous-silicon formation in HF–HNO3–H2O etchants10.1023/A:1014337308494 ↗
9. F. Book, et al., The Etchback Selective Emitter Technology and Its Application to Multicrystalline Silicon, 35th IEEEPVSC, 2010, 1309–131410.1109/PVSC.2010.5614267 ↗
10. The influence of porous silicon on junction formation in silicon solar cell10.1016/S0927-0248(02)00265-9 ↗
11. Characterization and properties of a modified Si solar cell emitter by a porous Si layer10.1016/S0921-5107(02)00718-3 ↗