Anatase TiO2 and ITO co-sputtered films for an indium-saving multicomponent electrode in organic solar cells
Source abstract
Abstract
Abstract We report the characteristics of a Ti–In–Sn–O (Ti–ITO) multicomponent electrode prepared by co-sputtering of ITO and anatase TiO 2 targets for reducing high-cost indium content in the anode layer of organic solar cells (OSCs). The dependence of electrical, optical, structural, and surface properties of the Ti–ITO multicomponent electrodes on the RF power was investigated in detail. The optimized Ti–ITO (80 W TiO 2 co-sputtered ITO) electrode exhibited a low sheet resistance of 18.06 Ω/square, a high average optical transmittance of 80.61% and a root mean square roughness of 2.40 nm. The anatase TiO 2 phase in the ITO matrix prevents the bixbyite structure from attaining the preferred orientation, producing a smooth surface of the Ti–ITO electrode. Moreover, the OSC with the optimized Ti–ITO anode showed an open circuit voltage (0.60 V), short circuit current (8.33 mA/cm 2 ), fill factor (63.99%) and power conversion efficiency (3.18%) comparable to those of OSCs with a reference ITO electrode. This indicates that the Ti–ITO multicomponent electrode is a promising indium-saving multicomponent electrode that to reduces the indium content in ITO electrodes for low-cost OSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. Organic tandem solar cells; a review10.1039/b817952b ↗
3. Polymer solar cells: recent development and possible routes for improvement in the performance10.1016/j.solmat.2009.10.005 ↗
4. A roll-ro-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
5. Outlook brightens for plastic solar cells10.1126/science.332.6027.293 ↗
6. Homepage of Konarka technologies, 〈http://www.konarka.com〉.
7. A complete process for production of flexible large area polymer solar cells entirely using screen printing – first public demonstration10.1016/j.solmat.2008.12.001 ↗
8. Manufacture, integration and demonstration of polymer solar cells in a lamp for the “Lighting Africa” initiative10.1039/b918441d ↗
9. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
10. A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions10.1016/j.solmat.2010.08.020 ↗
11. Dependence of electrical, optical, and structural properties on the thickness of IZTO thin films grown by linear facing target sputtering for organic solar cells10.1016/j.solmat.2010.05.056 ↗
12. Characteristics of Al doped ZnO co-sputtered InZnO anode films prepared by direct current magnetron sputtering for organic light emitting diodes10.1016/j.tsf.2008.05.035 ↗
13. Transparent conducting AZO cosputtered ITO anode films grown by a dual target DC magnetron sputtering for OLEDs10.1149/1.2976160 ↗
14. Transparent Ga and Zn co-doped In2O3 electrode prepared by co-sputtering of G: In2O3 and Zn: In2O3 targets at room temperature10.1016/j.tsf.2010.12.034 ↗
15. Titinium-doped indium oxide: a high-mobility transparent conductor10.1063/1.1995957 ↗
16. Transparent conductive characteristics of Ti:ITO films deposited by RF magnetron sputtering at low substrate temperature10.1016/j.surfcoat.2010.07.094 ↗
17. Niobium doped TiO2: intrinsic transparent metallic anatase versus highly resistive rutile phase10.1063/1.2750407 ↗
18. An Al-doped ZnO electrode grown by highly efficient cylindrical rotating magnetron sputtering for low cost organic photovoltaics10.1088/0022-3727/43/11/115101 ↗
19. Characteristics of indium-free GZO/Ag/GZO and AZO/Ag/AZO multilayer electrode grown by dual target DC sputtering at room temperature for low-cost organic photovoltaics10.1016/j.solmat.2009.07.016 ↗
20. New figure of merit for transparent conductors10.1063/1.323240 ↗
21. Effect of introducing H2O vapor on properties of RF sputter grown ITO anode layer for OLEDs10.1149/1.2906134 ↗
22. Investigations on the crystallisation properties of RF magnetron sputtered indium tin oxide thin films10.1016/S0040-6090(01)00820-3 ↗
23. Effect of oxygen partial pressure on the preferential orientation and surface morphology of ITO films grown by RF magnetron sputtering10.1007/s10832-007-9351-8 ↗
24. Structural and electrical properties of In2O3: Sn films prepared by radio-frequency sputtering10.1016/S0040-6090(01)01013-6 ↗
25. Transparent conducting indium zinc tin oxide anode for highly efficient phosphorescent organic light emitting diodes10.1149/1.2799745 ↗