journal article·2022-01

One-step preparation of TiO2 anti-reflection coating and cover layer by liquid phase deposition for monocrystalline Si PERC solar cell

Jui-Yu Wang, Chien-Sheng Huang, Sin-Liang Ou, Yun-Shao Cho, Jung-Jie Huang

Publisher page

Abstract

Abstract This study proposed a one-step liquid phase deposition (LPD) technique to fabricate a front-side anti-reflective coating (ARC) and rear-side cover layer for a passivated emitter and rear cell solar cell. The production process involves the deposition of TiO2 thin film by using a (NH4)2TiF6 and H3BO3 mixture in a liquid phase filter and cycling deposition system, in which H3BO3 concentration influences the TiO2 thin film deposition rate, the TixSi1-xOy interfacial layer thickness, and thin film quality. The proposed technique is a one-step, uniform, and large-scale double-sided coating batch process viable for non-vacuum environments, thus enabling a simple manufacturing process and requiring low equipment costs. The fabricated LPD-TiO2 thin film demonstrated ASTM 5B adhesion and 3.3% uniformity. The technique involves the use of a 0.2 M (NH4)2TiF6 and 0.5 M H3BO3 mixture for deposition under 50 °C to deposit a 68-nm-thick LPD-TiO2 thin film on pyramid Si wafer. The average reflectance and transmittance of the thin film at 400–800 nm wavelength was 2.7% and 96.5%, respectively. Passivated emitter and rear contact solar cells prepared using the proposed LPD-TiO2 coating technique demonstrated the following outstanding properties: 9.8 A short-circuit current, 0.68 V open circuit voltage, 81.0% fill factor, and 21.3% photoelectric conversion efficiency (η). The proposed technique demonstrates high potential for use in the low-cost manufacturing of silicon solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Towards high-efficiency industrial p-type mono-like Si PERC solar cells10.1016/j.solmat.2019.110202 ↗
2. Plasma-induced damage and annealing repairing in ALD-Al2O3/PECVD-SiNx stacks10.1016/j.mssp.2019.05.010 ↗
3. Characterisation and optimisation of PECVD SiNx as an antireflection coating and passivation layer for silicon solar cells10.1063/1.4795108 ↗
4. Efficient silicon nitride SiNx:H antireflective and passivation layers deposited by atmospheric pressure PECVD for silicon solar cells10.1002/pip.3141 ↗
5. The role of laser ablated backside contact pattern in efficiency improvement of mono crystalline silicon PERC solar cells10.1016/j.solener.2019.12.044 ↗
6. Optimization of rear surface roughness and metal grid design in industrial bifacial PERC solar cells10.1016/j.solmat.2020.110712 ↗
7. Passivated emitter and rear contact (PERC) approach for small-scale laboratory industrial applications10.1016/j.solener.2019.10.079 ↗
8. Sol–gel preparation of SiO2/TiO2/SiO2–TiO2 broadband antireflective coating for solar cell cover glass10.1016/j.solmat.2012.12.037 ↗
9. Tuning refractive indices of sol-gel silica coatings by ammonia treatment for broadband antireflection applications10.1016/j.ijleo.2020.165501 ↗
10. Efficiency improvement of the heterojunction solar cell using an antireflection Hf-doped In2O3 thin film prepared via glancing angle magnetron sputtering technology10.1016/j.optmat.2020.110323 ↗
11. Single material TiO2 double layers antireflection coating with photocatalytic property prepared by magnetron sputtering technique10.1016/j.vacuum.2014.05.009 ↗
12. Microstructure developments and anti-reflection properties of SiO2 films by liquid-phase deposition10.1016/j.mssp.2017.02.008 ↗
13. Properties of double-layer Al2O3/TiO2 antireflection coatings by liquid phase deposition10.1016/j.tsf.2015.01.042 ↗
14. Antireflection and passivation property of titanium oxide thin film on silicon nanowire by liquid phase deposition10.1016/j.surfcoat.2017.01.027 ↗
15. Electrical improvement of fluorine-passivated metal organic chemical vapor deposited TiO2 film on (NH4)2Sx-treated GaAs10.1143/JJAP.46.L1173 ↗
16. Characterization of enhancement-mode n-channel sulfur-treated InP MOSFET with liquid phase deposition-TiO2 gate oxide10.1116/1.4739057 ↗
17. Low leakage current fluorinated LPD- SiO2/MOCVD-TiO2 films10.1149/1.1836118 ↗
18. Tuning back side passivation for enhancing the performance of PERC solar cells10.1016/j.solmat.2021.111319 ↗
19. Influence of phase composition on optical properties of TiO2: dependence of refractive index and band gap on formation of TiO2-II phase in thin films10.1016/j.optmat.2019.109335 ↗
20. Thermal effect on the optical and morphological properties of TiO2 thin films obtained by annealing a Ti metal layer10.3938/jkps.70.169 ↗
21. Improvements in anti-reflection coatings for high-efficiency silicon solar cells10.1016/S0257-8972(98)00499-X ↗
22. Antireflection coatings for planar silicon solar cells10.1016/0379-6787(86)90029-3 ↗
23. A novel and effective PECVD SiO2/SiN antireflection coating for Si solar cells10.1109/16.214744 ↗
24. Tri-layer antireflection coatings (SiO2/SiO2–TiO2/TiO2) for silicon solar cells using a sol–gel technique10.1016/j.solmat.2006.04.001 ↗
25. Influence of refractive index on antireflectance efficiency of thin films10.3390/ma12091483 ↗
26. Silicon pyramid structure as a reflectivity reduction mechanism10.3923/jas.2017.374.383 ↗
27. Texturization of as-cut p-type monocrystalline silicon wafer using different wet chemical solutions10.1007/s00339-018-1818-8 ↗
28. Influence of pyramid size on reflectivity of silicon surfaces textured using an alkaline etchant10.1007/s12034-019-1848-7 ↗
29. Phytic acid layer template-assisted deposition of TiO2 ilm on titanium: surface electronic properties, super-hydrophilicity and bending strength10.1016/j.matdes.2015.10.026 ↗
30. Comparison of the indoor performance of 12 commercial PV products by a simple model10.1002/ese3.110 ↗
31. Towards high-efficiency industrial p-type mono-like Si PERC solar cells10.1016/j.solmat.2019.110202 ↗
32. Plasma-induced damage and annealing repairing in ALD-Al2O3/PECVD-SiNx stacks10.1016/j.mssp.2019.05.010 ↗
33. Optimization of rear surface roughness and metal grid design in industrial bifacial PERC solar cells10.1016/j.solmat.2020.110712 ↗
34. High-efficiency passivated emitter and rear cells with nano honeycomb structure10.1016/j.solener.2021.06.066 ↗
35. Electro-analytical comparison of commercial mono-crystalline silicon and PERC solar cells to maximize performance10.1088/2631-8695/abc362 ↗
36. High-efficiency silicon inverted pyramid-based passivated emitter and rear cells10.1186/s11671-020-03404-y ↗