Lifetime prediction model of reflector materials for concentrating solar thermal energies in corrosive environments
Source abstract
Abstract
Concentrated solar thermal technologies play an essential role in the energetic transition which is currently facing our society. The energy generation in this technology vastly depends on the optical behaviour of the reflector materials of the solar field. Corrosion of solar reflectors might be an issue in locations with high corrosive environments because an excessive corrosion of the solar mirror could be catastrophic for the profitability of the concentrated solar thermal plant. This research is focusing on modelling the durability of four different solar reflector materials exposed outdoors by accelerated aging tests. For this purpose, ten locations suitable for concentrating solar thermal applications were classified depending on their corrosive aggressiveness. Commercial, free-lead and low-cost reflectors samples were exposed in all the sites to determine the influence of the corrosion in its durability. Corrosion defects appeared in the solar reflectors during outdoor exposure were properly reproduced by CASS test. Novel lifetime prediction models were developed for all the solar reflectors depending on the corrosive aggressiveness of the place. Number and thickness of the paint coatings employed in the solar mirrors were identified as one of the most important parameters to improve the energy generation of a CSP plant in corrosive environments. A reduction of the capital invested in the solar mirror purchase is expected for sites with low corrosivity.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. CO2 emissions from fuel combustion: overview
2. Solar energy resource assessment in Mexican states along the Gulf of Mexico10.1016/j.rser.2014.10.025 ↗
3. Photovoltaics and renewable energies in Europe10.1016/j.rser.2005.11.001 ↗
4. Renewable energy production in Spain: a review10.1016/j.rser.2014.01.091 ↗
5. Environmental impacts from the solar energy technologies10.1016/S0301-4215(03)00241-6 ↗
6. Effects of different sizes and dispatch strategies of thermal energy storage on solar energy usage ability of solar thermal power plant10.1016/j.applthermaleng.2019.04.041 ↗
7. A review of solar collectors and thermal energy storage in solar thermal10.1016/j.apenergy.2012.11.051 ↗
8. Integrated analysis of dispatchable concentrated solar power10.1016/j.egypro.2015.03.138 ↗
9. 2017 · vol. 8
10. 2016
11. 2018 · 160
12. Modeling, simulation and performance analysis of parabolic trough solar collectors: a comprehensive review10.1016/j.apenergy.2018.05.014 ↗
13. 2012 · 1
14. A review of the application performances of concentrated solar power systems10.1016/j.apenergy.2019.113893 ↗
15. 2012
16. Large-scale solar desalination by combination with CSP: techno-economic analysis of different options for the Mediterranean Sea and the Arabian Gulf10.1016/j.desal.2014.12.037 ↗
17. A neglected water resource: the Camanchaca of South America10.1175/1520-0477(1988)069<0138:ANWRTC>2.0.CO;2 ↗
18. Durability studies of solar reflectors used in concentrating solar thermal technologies under corrosive sulfurous atmospheres
19. Study of the effect of acid atmospheres in solar reflectors durability under accelerated aging conditions10.1016/j.egypro.2014.03.177 ↗
20. Influence of gaseous pollutants and their synergistic effects on the aging of reflector materials for concentrating solar thermal technologies10.1016/j.solmat.2019.109955 ↗
21. Effects of reduced sulphur atmospheres on reflector materials for concentrating solar thermal applications10.1016/j.corsci.2018.01.021 ↗
22. Effect of temperature variation on the corrosion behaviour and semiconducting properties of the passive film formed on chromium oxide coatings exposed to saline solution10.1016/j.corsci.2019.04.004 ↗
23. Field studies of corrosion behaviour of copper alloys in natural seawater10.1016/j.corsci.2013.07.019 ↗
24. Corrosion of copper and silver plates by volcanic gases10.1016/j.corsci.2005.12.009 ↗
25. Influence of relative humidity and ozone on atmospheric silver corrosion10.1016/j.corsci.2013.07.028 ↗
26. Sutter · 2017 · 169
27. Lifetime prediction of aluminum solar mirrors by correlating accelerated aging and outdoor exposure experiments10.1016/j.solener.2018.09.006 ↗
28. 2018
29. 2017
30. A lifetime prediction model for coated metallic bipolar plates in proton exchange membrane fuel cells, Energy10.1016/j.enconman.2018.12.092 ↗
31. Performance evaluation and lifetime prediction of a segmented photovoltaic-thermoelectric hybrid system10.1016/j.enconman.2020.112744 ↗
32. A reconstructed fuel cell life-prediction model for a fuel cell hybrid city bus10.1016/j.enconman.2017.11.069 ↗
33. Modelling of optical durability of enhanced aluminum solar reflectors10.1016/j.solmat.2012.07.027 ↗
34. Digrazia · 2012
35. 2012
36. Durability studies of solar reflectors: a review10.1016/j.rser.2016.04.060 ↗
37. Sandstorm erosion simulation on solar mirrors and comparison with field data10.1063/1.4984508 ↗
38. Comparison of degradation on aluminum reflectors for solar collectors due to outdoor exposure and accelerated aging10.3390/en9110916 ↗
39. Advanced cyclic accelerated aging testing of solar reflector materials10.1063/1.5117670 ↗
40. The performance of concentrated solar power (CSP) systems: analysis, Chap 3: Mirrors
41. Advanced analysis of corroded solar reflectors10.3390/coatings9110749 ↗
42. Indirect method to determine near-normal sun-conic reflectance
43. Equipment and methods for measuring reflectance of concentrating solar reflector materials10.1016/j.solmat.2017.03.036 ↗
44. Uncertainty study of reflectance measurements for concentrating solar reflectors10.1109/TIM.2020.2975387 ↗
45. 2003
46. 2012
47. Sandstorm erosion on solar reflectors: highly realistic modeling of artificial aging tests based on advanced site assessment10.1016/j.apenergy.2020.114925 ↗
48. Towards the prediction of CSP mirrors wear: methodology of analysis of influencing parameters on the mirrors surface degradation: application in two different sites in Morocco10.1016/j.solener.2014.06.036 ↗
49. LCOE analysis of tower concentrating solar power plants using different molten-salts for thermal energy storage in China10.3390/en12071394 ↗
50. S. Boukheir et al. reportRaiselife Deliverable D1.3: Report on Outdoor Exposure of Mirror Samples.
51. Durability testing of silvered-glass mirrors10.1016/j.egypro.2015.03.110 ↗
52. Köhl · 2004