Cr-(CrN/TiAlN)m-AlSiN-AlSiO open-air stable solar selective coating for concentrated solar thermal power applications
Source abstract
Abstract
Abstract A novel spectrally selective multilayer coating: Cr-(CrN/TiAlN)m-AlSiN-AlSiO on SS316 substrate/tube was deposited via Cathodic Arc Physical Vapor Deposition (CAPVD) technique. The coating exhibited state-of-the-art absorptivity (α = 0.95–0.96) and emissivity (e = 0.09–0.11). In view of open-air solar thermal application requirements, the coating has been systematically analysed for its thermal, environmental (corrosion) and mechanical stability. The thermal cycling studies carried out at 500 °C in open-air conditions have shown no change in optical properties for about 150 cycles. Further, accelerated thermal aging tests have shown an extrapolated service life of 25 years at 411 °C. In the case of corrosion studies, up to 520 h of exposure to 5% NaCl medium, no considerable change in optical properties was observed. Further, the coatings were well adherent to the substrates/tubes (6 N of critical load) with a considerable hydrophobicity (104° contact angle). The observed results indicate that, Cr-(CrN/TiAlN)2–AlSiN–AlSiO coating may be a good choice for developing receiver tubes used in Concentrated Solar Power (CSP) systems with best solar selective properties and the capability to withstand harsh environments like solar flux variations, thermal shocks in the presence of open-air pollutants, dust and humidity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Hoffschmidt · 2012 · 165
2. Solar energy research: program in the new desert research institute in beersheb10.1016/0038-092X(58)90001-X ↗
3. TiAlN/TiAlON/Si3N4 tandem absorber for high temperature solar selective applications10.1063/1.2387897 ↗
4. A review of cermet-based spectrally selective solar absorbers10.1039/c3ee43825b ↗
5. Recent progress on CdTe/CdS thin film solar cells10.1016/j.solener.2004.07.011 ↗
6. Review of physical vapor deposited (PVD) spectrally selective coatings for mid - and high - temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
7. Cathodic arc deposition of solar thermal selective surfaces10.1016/0927-0248(96)00026-8 ↗
8. Graded selective coatings based on chromium and titanium oxynitride10.1016/S0040-6090(03)00967-2 ↗
9. A facile process to prepare copper oxide thin films as solar selective absorbers10.1016/j.apsusc.2011.07.088 ↗
10. Air-stable NiFeCrOx selective absorber for mid-to-high temperature application10.1016/j.solener.2014.12.033 ↗
11. Annealing effect on the structural and optical properties of Cr/-Cr2O3 monodispersed particles based solar absorbers10.1016/j.apsusc.2012.11.099 ↗
12. Functional multi-layer nitride coatings for high temperature solar selective applications10.1016/j.solmat.2013.10.024 ↗
13. High temperature stable solar selective coatings by cathodic arc PVD for heat collecting elements10.1016/j.solmat.2015.11.012 ↗
14. The degradation of solar thermal absorption coatings10.1016/j.egypro.2014.03.185 ↗
15. Study of the stability of a selective solar absorber coating under air and high temperature conditions10.1016/j.egypro.2015.03.107 ↗
16. Long-term thermal stability of CrAlO-based solar selective absorbing coating in elevated temperature air10.1016/j.solmat.2014.12.009 ↗
17. High-temperature air-stable solar selective coating based on MoSi2–Si3N4 composite10.1016/j.solmat.2017.08.021 ↗
18. A high thermally stable Mn-Cu-Fe composite oxide based solar selective absorber layer with low thermal loss at high temperature10.1016/j.jallcom.2015.05.038 ↗
19. Design, Fabrication and optical characterizations of large-area lithography free ultrathin multilayer selective solar coatings with excellent thermal stability in air10.1016/j.solmat.2017.09.025 ↗
20. The investigation of thermal stability of Al/NbMoN/NbMoON/SiO2 solar selective absorbing coating10.1016/j.solmat.2017.06.056 ↗
21. Optical properties and thermal stability of colored solar selective coatings with double-layer anti reflection coatings10.1016/j.solener.2015.12.022 ↗
22. Microstructure and thermal stability of Cu/Zr0.3 Al0.7N/Zr0.2Al0.8N/Al34O60N6 cermet-based solar selective absorbing coatings10.1016/j.apsusc.2018.01.268 ↗
23. Preparation and thermal stability of a novel mid-temperature air-stable solar selective coating10.1016/j.apsusc.2019.05.102 ↗
24. Optical simulation, characterization and thermal stability of Cr2O3/Cr/Cr2O3 multilayer solar selective absorber coatings10.1016/j.jallcom.2018.12.286 ↗
25. Structure, thermal stability and optical simulation of ZrB2 based spectrally selective solar absorber coatings10.1016/j.solmat.2018.12.040 ↗
26. International Astm B117–11 · 2011
27. Accelerated life testing of solar absorber coatings: testing procedure and results10.1016/S0038-092X(00)00034-7 ↗
28. Microstructure and thermal stability of Al/Ti0.5 Al0.5N/Ti0.25Al0.75N/AlN solar selective coating10.1016/j.solmat.2012.12.010 ↗
29. High solar absorption of a multilayered thin film structure10.1364/OE.15.001907 ↗
30. Spectrally selective NbAlN/NbAlON/Si3N4 tandem absorber for high-temperature solar applications10.1016/j.solmat.2007.11.004 ↗
31. The spectral selective absorbing characteristics of thermal stability of SS/TiAlN/TiAlSiN/Si3N4 tandem absorber prepared by magnetron sputtering10.1016/j.solener.2014.11.005 ↗
32. Spectroscopic ellipsometry measurements of chromium nitride coatings10.1116/1.1405513 ↗
33. Structural, morphological, and optical characterizations of Mo, CrN and Mo:CrN sputtered coatings for potential solar selective applications10.1016/j.apsusc.2018.01.267 ↗
34. Functional multi-layer solar spectral selective absorbing coatings of AlCrSiN/AlCrSiON/AlCrO for high temperature applications10.1016/j.solmat.2016.04.007 ↗
35. Characterization of Ti1-xAlxN coatings with selective IR reflectivity10.1016/j.solener.2010.04.021 ↗
36. Factors influencing properties of CrN thin films grown by cylindrical cathodic arc physical vapor deposition on HSS substrates10.1016/j.msea.2012.02.098 ↗
37. Structure-Property correlations in cathodic arc deposited TiAlN coatings
38. Thermal oxidation properties of titanium nitride and titanium–aluminum nitride materials - a perspective for high temperature air-stable solar selective absorber applications10.1016/j.tsf.2006.03.042 ↗
39. An extremely broad band metamaterial absorber based on destructive interference10.1364/OE.19.021155 ↗
40. Multi-layer solar selective absorber coatings based on W/WSiAlNx/WSiAlOyNx/SiAlOx for high temperature applications10.1016/j.solmat.2018.07.001 ↗
41. Effects of environmental and operational variability on the spectrally selective properties of W/WAlN/WAlON/Al2O3-based solar absorber coating10.1016/j.solmat.2018.04.020 ↗
42. Design, fabrication and characterization of TiO2-SiO2 multilayer with tailored color glazing for thermal solar collectors10.1016/j.matdes.2017.05.063 ↗
43. Accelerated aging tests on ENEA-ASE solar coating for receiver tube suitable to operate up to 550 °C10.1063/1.4949055 ↗
44. In air durability study of Solar selective coating for Parabolic Trough Technology10.1063/1.4984504 ↗
45. Thermal stability of TiAlN/TiAlON/Si3N4 tandem absorbers prepared by reactive direct current magnetron sputtering, Journal of vacuum science and technology A10.1116/1.2699425 ↗
46. Tribological properties of CrNx coatings
47. Infrared study of OH and NH2 group on the surface of a dry silica aerogel10.1021/j100881a037 ↗