Influence of gaseous pollutants and their synergistic effects on the aging of reflector materials for concentrating solar thermal technologies
Source abstract
Abstract
Abstract Concentrating solar thermal technologies have experienced an important boost in the last few years. Besides the production of electricity, they are particularly useful for the supply of industrial process heat. The industrial atmospheres affecting these solar plants typically contain gaseous pollutants that are likely to promote corrosion on the components of the solar facility, specifically solar reflectors, thereby compromising their optimal performance and the overall system efficiency. Seven accelerated aging tests were designed to study the effects of three air pollutants (H2S, SO2 and NO2) on the durability of two commercially available reflector types (silvered-glass and aluminum), both in single-gas tests and in multicomponent gas mixtures. Additionally, the same material types were exposed outdoors at five representative polluted sites, including industrial, urban and coastal environments. Reflectance and optical microscope monitoring corroborated which degree of corrosion was developed on a specific type of reflector in the different tests with gaseous pollutants, as well as the synergistic effects of gas combinations. For example, tests with sulfur were harmful for silvered-glass reflectors (up to a total of 16 corrosion spots), whereas aluminum was particularly affected by tests with NO2 (numerous micro spots of around 50 μm size). Moreover, comparisons of the corrosion patterns found in accelerated-aging and outdoor exposures revealed which laboratory test reproduced the different real polluted atmospheres in the most realistic way, which is the main goal of this work. For instance, the degradation found at Site 2 was reproduced by Test NO2+SO2, with an acceleration factor of 27.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Wind and Air Flow Studies · Solar Energy Systems and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. IEA
2. Durability studies of solar reflectors: a review10.1016/j.rser.2016.04.060 ↗
3. Reactions at the silver/polymer interface: a review10.1016/0165-1633(80)90063-5 ↗
4. Perry · 1999
5. Comparison between predicted and actually observed in-service degradation of a nickel pigmented anodized aluminum absorber coating for solar DHW systems10.1016/S0927-0248(99)00112-9 ↗
6. Degradation effects of maritime atmosphere on metallic components of solar collectors10.1016/j.solmat.2015.12.011 ↗
7. Durability of different selective solar absorber coatings in environments with different corrosivity10.1016/j.solmat.2017.03.004 ↗
8. Degradation of selective solar absorber surfaces in solar thermal collectors – an EIS study10.1016/j.solmat.2016.10.015 ↗
9. The role of sulfur in the at- mospheric corrosion of silver10.1149/2.0051512jes ↗
10. The corrosion behavior of PCB-ImAg in industry polluted marine atmosphere environment10.1016/j.matdes.2016.11.074 ↗
11. Atmospheric corrosion effects of HNO3–Influence of temperature and relative humidity on laboratory-exposed copper10.1016/j.atmosenv.2006.10.018 ↗
12. Interaction of copper and NO2: effect of joint presence of SO2, relative humidity and temperature10.1016/j.jpcs.2007.10.003 ↗
13. Optical properties, durability, and system aspects of a new aluminium-polymer-laminated steel reflector for solar concentrators10.1016/j.solmat.2004.01.029 ↗
14. Standardizing accelerated aging testing conditions for silvered-glass reflectors
15. Correlation between solar mirror degradation and colorimetric measurement of protective back layer10.1016/j.egypro.2014.03.179 ↗
16. Critical constraints responsible to solar glass mirror degradation10.1016/j.egypro.2015.03.103 ↗
17. Review of accelerated ageing test modelling and its application to solar mirrors10.1016/j.solmat.2018.06.024 ↗
18. Lifetime prediction of aluminum solar mirrors by correlating accelerated aging and outdoor exposure experiments10.1016/j.solener.2018.09.006 ↗
19. Acceptance criteria for accelerated aging testing of silvered-glass mirrors for concentrated solar power technologies10.1016/j.solmat.2019.01.008 ↗
20. Towards the prediction of CSP mirrors wear: methodology of analysis of influencing parameters on the mirrors surface degradation: application in two different sites in Morocco10.1016/j.solener.2014.06.036 ↗
21. Laboratory simulation of the surface erosion of solar glass mirrors10.1016/j.solener.2015.05.044 ↗
22. Durability of solar reflector materials for secondary concentrators used in CSP systems10.1016/j.solmat.2014.06.043 ↗
23. Durability testing of silvered-glass mirrors10.1016/j.egypro.2015.03.110 ↗
24. Sand erosion on solar reflectors: accelerated simulation and comparison with field data10.1016/j.solmat.2015.10.036 ↗
25. Modelling of optical durability of enhanced aluminum solar reflectors10.1016/j.solmat.2012.07.027 ↗
26. Folgner · 2016
27. Effects of reduced sulphur atmospheres on reflector materials for concentrating solar thermal applications10.1016/j.corsci.2018.01.021 ↗
28. Durability studies of solar reflectors for concentrating solar thermal technologies under corrosive sulfurous atmospheres10.3390/su10093008 ↗
29. Degradation of concentrating solar thermal reflectors in acid rain atmospheres10.1016/j.solmat.2018.06.032 ↗
30. Degradation of power contacts in industrial atmosphere: silver corrosion and whiskers
31. Atmospheric corrosion of materials
32. Corrosion mechanisms for aluminum exposed to the atmosphere10.1149/1.2096869 ↗
33. Study of the effect of acid atmospheres in solar reflectors durability under accelerated aging conditions10.1016/j.egypro.2014.03.177 ↗
34. A laboratory study of the atmospheric corrosion of metals. Part I.-The corrosion of copper in certain synthetic atmospheres, with particular reference to the influence of sulphur dioxide in air of various relative humidities10.1039/TF9312700255 ↗
35. In situ QCM and TM-AFM investigations of the early stages of degradation of silver and copper surfaces10.1016/j.apsusc.2006.08.005 ↗
36. Looking back on contributions in the field of atmospheric corrosion offered by the MICAT ibero-american testing network10.1155/2012/824365 ↗
37. Corrosion process of silver in environments containing 0.1 ppm H2S and 1.2 ppm NO210.1002/maco.200390053 ↗
38. The atmospheric sulfidation of silver in a tubular corrosion reactor10.1016/0010-938X(89)90065-6 ↗
39. Composition of copper tarnish products formed in moist air with trace levels of pollutant gas: hydrogen sulfide and sulfur dioxide/hydrogen sulfide10.1149/1.2048404 ↗
40. Multiple contaminant gas effects on electronic equipment corrosion10.5006/1.3585230 ↗
41. Influence of acid deposition on atmospheric corrosion of metals: a review
42. The effect of nitrogen oxides in atmospheric corrosion of metals10.1016/0010-938X(94)00136-T ↗
43. SMALL-SIZED parabolic-trough solar collectors: development of a test loop and evaluation of testing conditions10.1016/j.energy.2018.03.160 ↗
44. Comparison of degradation on aluminum reflectors for solar collectors due to outdoor exposure and accelerated aging10.3390/en9110916 ↗
45. ISO 10062:2006 · 2006
46. 2004
47. 2003
48. 2016
49. 2012
50. 2012
51. 2010
52. Equipment and methods for measuring reflectance of concentrating solar reflector materials10.1016/j.solmat.2017.03.036 ↗
53. Reflectometer comparison for assessment of back-silvered glass solar mirrors10.1016/j.solener.2017.06.053 ↗
54. Fernández-García · 2018
55. 2003
56. 2003
57. Indoor corrosion of copper and silver exposed in Japan and ASEAN 1 countries10.1149/1.2085766 ↗
58. Environmental effects on materials: the effect of the air pollutants SO2, NO2, NO and O3 on the corrosion of copper, zinc and aluminum. A short literature survey and results of laboratory exposures10.1016/S0010-938X(97)00047-4 ↗
59. Basics of corrosion chemistry
60. ISO 9227:2017 · 2017
61. Analysis of the effects of outdoor and accelerated ageing on the optical properties of reflector materials for solar energy applications