journal article·2018-06

Multicrystalline silicon assisted by polycrystalline silicon slabs as seeds

Chunlai Huang, Huali Zhang, Shuai Yuan, Yihua Wu, Xinhao Zhang, Da You, Lei Wang, Xuegong Yu, Yuepeng Wan, Deren Yang

Publisher page

Abstract

Abstract An effective method of using polycrystalline silicon (poly-Si) planar slabs as seed materials for industrial low-cost and high-quality seed-assisted multicrystalline silicon has been presented. The interspace volume of the poly-Si slab seed layer is much lower compared to poly-Si nugget seed layer, so the initial grains of the slab-assisted ingot are much more uniform than those of the nugget-assisted ingot. Photoluminescence (PL) and minority lifetime measurements showed a considerable reduction in dislocation cluster density in the slab-assisted ingot, especially at the middle and top regions. The average cell efficiency based on the slab-assisted ingot is enhanced by 0.12% in absolute value compared to the nugget-assisted ingot. Moreover, the bottom edge of slab-assisted ingot can be fully recycled through existing cleaning process without remaining SiC particles, which saves considerable materials and slicing costs in mass manufacturing compared to nugget-assisted growth method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Development of high quality multi-crystalline silicon for photovoltaic industry10.1002/pip.2437 ↗
2. The emergence of high-performance multi-crystalline silicon in photovoltaics10.1016/j.jcrysgro.2016.10.072 ↗
3. Dongli Hu, Qi Lei, Hongrong Chen, Yuepeng Wan, A type of multicrystalline silion ingot preparation method and multicrystalline wafer. Chinese patent.
4. Seed-assisted growth of high-quality multi-crystalline silicon in directional solidification10.1016/j.jcrysgro.2013.09.051 ↗
5. Development of grain structures of multi- crystalline silicon from randomly orientated seeds in directional solidification10.1016/j.jcrysgro.2013.10.021 ↗
6. Characterization of high-efficiency multi-crystalline silicon in industrial production10.1016/j.solmat.2013.06.013 ↗
7. Clarification of the relation between the grain structure of industrial grown mc-Si and the area fraction of electrical active defects by means of statistical grain structure evaluation10.1016/j.actamat.2015.12.049 ↗
8. Influence of different seed materials on multi-crystalline silicon ingot properties10.1016/j.jcrysgro.2015.10.024 ↗
9. Comparison of defect formations in solar silicon growth from small random and large oriented seeds10.1016/j.jcrysgro.2015.02.087 ↗
10. Grain growth of cast-multi-crystalline silicon grown from small randomly oriented seed crystal10.1016/j.jcrysgro.2014.01.067 ↗
11. Microstructure of multi-crystalline silicon seeded by poly silicon chips and fluidized bed reactor granules10.1016/j.jcrysgro.2016.02.017 ↗
12. Different nucleation approaches for production of high-performance multi-crystalline silicon ingots and solar cells10.1016/j.solmat.2016.08.038 ↗
13. The effect of silica nucleation layers on grain control of multi-crystalline silicon in directional solidification10.1016/j.jcrysgro.2014.06.047 ↗
14. Growth of multi-crystalline silicon ingot with both enhanced quality and yield through quartz seeded method10.1016/j.jcrysgro.2015.11.020 ↗
15. Multicrystalline silicon crystal assisted by silicon flakes as seeds10.1016/j.solmat.2017.09.004 ↗
16. Influencing factors on the formation of the low minority carrier lifetime zone at the bottom of seed-assisted cast ingots10.1016/j.jcrysgro.2014.05.015 ↗
17. Hard inclusions and their detrimental effects on the wire sawing process of multi-crystalline silicon10.1016/j.solmat.2007.06.001 ↗
18. On-wafer investigation of SiC and Si3N4 inclusions in multi-crystalline Si grown by directional solidification10.1016/j.solmat.2008.03.007 ↗