journal article·2016-03

Fundamental understanding, impact, and removal of boron-rich layer on n-type silicon solar cells

Kyungsun Ryu, Chel-Jong Choi, Hyomin Park, Donghwan Kim, Ajeet Rohatgi, Young-Woo Ok

Publisher page

Abstract

Abstract Most boron diffusion technologies result in the formation of an undesirable boron-rich layer (BRL) on the emitter surface. This paper reports on a study of the impact of gradual etching of the BRL on n-type silicon solar cell performance. It is found that gradual removal of the BRL improves surface passivation and bulk lifetime in the finished cell, while over-etching of the BRL results in a sharp decrease in fill factor due to the increased n-factor and series resistance. It is shown that the optimum chemical etching of the BRL formed as a byproduct of the screen-printed boron emitter diffusion used in this study raised the cell efficiency by ~0.5%, resulting in 20.0% efficient large area (239 cm 2 ) n-type solar cells. The change in BRL thickness and morphology as a function of chemical etching time was investigated by TEM and AES measurements to explain the quantitative impact of BRL removal on cell performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Advancements in Semiconductor Devices and Circuit Design · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Recombination activity of interstitial iron and other transition metal point defects in p-and n-type crystalline silicon10.1063/1.1812833 ↗
2. Millisecond minority carrier lifetimes in n-type multicrystalline silicon10.1063/1.1529089 ↗
3. Fundamental boron–oxygen-related carrier lifetime limit in mono- and multicrystalline silicon10.1002/pip.586 ↗
4. P-type versus n-type silicon wafers: prospects for high-efficiency commercial silicon solar cells10.1109/TED.2006.878026 ↗
5. A. Das, A. Rohatgi, The impact of cell design on light induced degradation in p-type silicon solar cells, in: Proceedings of Photovoltaic Specialists Conference (PVSC), 2011 37th IEEE, 2011, pp. 000158–000164.10.1109/PVSC.2011.6185869 ↗
6. Boron predeposition in silicon using BBr310.1149/1.2131510 ↗
7. Mechanisms of transition-metal gettering in silicon10.1063/1.1289273 ↗
8. Phosphorus and boron diffusion gettering of iron in monocrystalline silicon10.1063/1.3582086 ↗
9. High efficiency large area n-type front junction silicon solar cells with boron emitter formed by screen printing technology10.1002/pip.2486 ↗
10. The influence of diffusion-induced dislocations on high efficiency silicon solar cells10.1109/TED.2005.863535 ↗
11. Charge carrier lifetime degradation in Cz silicon through the formation of a boron-rich layer during BBr3 diffusion processes10.1088/0268-1242/25/5/055001 ↗
12. Tradeoffs between impurity gettering, bulk degradation, and surface passivation of boron-rich layers on silicon solar cells, photovoltaics
13. Chemical etching of boron-rich layer and its impact on high efficiency n-type silicon solar cells10.1063/1.4746424 ↗
14. Ion-implanted and screen-printed large area 20% efficient n-type front junction Si solar cells10.1016/j.solmat.2014.01.002 ↗
15. 20.7% efficient ion-implanted large area n-type front junction silicon solar cells with rear point contacts formed by laser opening and physical vapor deposition10.1002/pip.2545 ↗
16. Contact resistance: its measurement and relative importance to power loss in a solar cell10.1109/T-ED.1984.21584 ↗
17. Fully Ion-implanted and screen-printed 20.2% efficient front junction silicon cells on 239 cm2 n-type CZ substrate, photovoltaics
18. M.M. Hilali, A. Rohatgi, B. To, A review and understanding of screen-printed contacts and selective-emitter formation, in: Proceedings of the 14th workshop on crystalline silicon solar cells and modules,2004, pp. 80401–83393.
19. U. Ja¨ger, S. Mack, A. Kimmerle, A. Wolf, R. Preu, Influence of doping profile of highly doped regions for selective emitter solar cells, in: Proceedings of the Photovoltaic Specialists Conference (PVSC), 2010 35th IEEE, 2010, pp. 003185–003189.10.1109/PVSC.2010.5616866 ↗
20. Surface recombination velocity of highly doped n‐type silicon10.1063/1.363250 ↗
21. Direct comparison of boron, phosphorus, and aluminum gettering of iron in crystalline silicon10.1063/1.3569890 ↗