journal article·2016-02

Efficiency enhancement by adding SnS powder during selenization for Cu 2 ZnSn(S,Se) 4 thin film solar cells

Chung-Hao Cai, Shih-Yuan Wei, Wei-Chih Huang, Jeff Lin, Tzu-Hsuan Yeh, Chih-Huang Lai

Publisher page

Abstract

Abstract A two-step process with post-annealing of stacked precursors has been widely used for Cu2ZnSn(S,Se)4 (CZTSSe) absorbers. However, no simple approach is currently available for simultaneously tuning the S/(S+Se) ratio and avoiding tin loss issue in CZTSSe films, which are critical factors to achieve high efficiency. In this work, we demonstrate by simply adding SnS powder during selenization, we can eliminate the tin loss and also control the S/(S+Se) ratio. Furthermore, we can suppress the formation of Mo(S,Se)2 during selenization. Based on thermodynamic calculations, we propose SnS powder reacts with selenium to form SnSe and releases sulfur vapor during selenization. The Sn-contained vapor avoids tin evaporation from CZTSSe. By varying the amount of SnS powder, the partial pressure ratio of sulfur to selenium can be tuned; therefore, the film composition and band bap of CZTSSe can be changed. The presence of sulfur partial pressure also dramatically decreases the formation of Mo(S,Se)2 during selenization. The efficiency is substantially boosted from 3.97% to 7.35% by adding SnS powder during selenization. Our approach realizes one-step sulfo-selenization, providing a general tuning knob for compositional control of CZTSSe absorbers, which shines light on various process developments of CZTSSe absorbers by post-annealing vacuum- or solution-fabricated precursors.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Technological status of Cu2ZnSn(S,Se)4 thin film solar cells10.1016/j.solmat.2013.08.027 ↗
2. Electrical and optical properties of Cu2ZnSnS4 thin films prepared by rf magnetron sputtering process10.1016/S0927-0248(02)00127-7 ↗
3. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
4. Cu2ZnSnSe4 thin-film solar cells by thermal co-evaporation with 11.6% efficiency and improved minority carrier diffusion length
5. V. Chawla, B. Clemens, Effect of composition on high efficiency CZTSSe devices fabricated using co-sputtering of compound targets, in: Proceedings of the 38th IEEE Photovoltaic Specialists Conference, (2012), pp. 002990–00299210.1109/PVSC.2012.6318212 ↗
6. H. Hiroi, N. Sakai, T. Kato, H. Sugimoto, High voltage Cu2ZnSnS4 submodules by hybrid buffer layer, in: Proceedings of the 39th IEEE Photovoltaic Specialists Conference, (2013), pp. 0863–0866.
7. Phase equilibria in the Cu2S–ZnS–SnS2 system10.1016/j.jallcom.2003.08.084 ↗
8. Studies of compositional dependent CZTS thin film solar cells by pulsed laser deposition technique: an attempt to improve the efficiency10.1016/j.jallcom.2012.07.108 ↗
9. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
10. The consequences of kesterite equilibria for efficient solar cells10.1021/ja111713g ↗
11. Cu2ZnSn(S,Se)4 solar cells processed by rapid thermal processing of stacked elemental layer precursors10.1016/j.tsf.2012.10.042 ↗
12. Single-Step sulfo-selenization method to synthesize Cu2ZnSn(SySe1−y)4 absorbers from metallic stack precursors10.1002/cphc.201300157 ↗
13. Raman scattering quantitative analysis of the anion chemical composition in kesterite Cu2ZnSn(SxSe1−x)4 solid solutions10.1016/j.jallcom.2014.12.175 ↗
14. MoSe2 layer formation at Cu(In, Ga)Se2/Mo interfaces in high efficiency Cu(In1-xGa x)Se 2 solar cells10.1143/JJAP.37.L71 ↗
15. Control of an interfacial MoSe2 layer in Cu2ZnSnSe4 thin film solar cells: 8.9% power conversion efficiency with a TiN diffusion barrier10.1063/1.4740276 ↗
16. Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cells10.1063/1.3522884 ↗
17. Cu2ZnSnSe4 absorbers processed from solution deposited metal salt precursors under different selenization conditions10.1002/pssa.201228003 ↗
18. Properties of Cu2ZnSn(SxSe1−x)4 thin films prepared by one-step sulfo-selenization of alloyed metal precursors10.1016/j.cap.2014.04.005 ↗
19. Detection of a ZnSe secondary phase in coevaporated Cu2ZnSnSe4 thin films10.1063/1.3558706 ↗
20. Photoluminescence and Raman study of Cu2ZnSn(SexS1-x)4 monograins for photovoltaic applications10.1016/j.tsf.2010.12.099 ↗
21. Multiwavelength excitation Raman scattering of Cu2ZnSn(SxSe1−x)4 (0≤x≤1) polycrystalline thin films: vibrational properties of sulfoselenide solid solutions10.1063/1.4891333 ↗
22. Growth and characterization of Cu2ZnSn(S,Se)4 thin films for solar cells10.1016/j.solmat.2012.02.031 ↗
23. Route toward high-efficiency single-phase Cu2ZnSn(S,Se)4 thin-film solar cells: model experiments and literature review10.1109/JPHOTOV.2011.2168811 ↗
24. Equilibria in the system molybdenum+sulphur+hydrogen,10.1039/tf9605601460 ↗
25. Thermodynamic aspects of the synthesis of thin-film materials for solar cells10.1002/cphc.201200067 ↗
26. Chemical structures of the Cu(In,Ga)Se2/Mo and Cu(In,Ga)(S,Se)2/Mo interfaces10.1103/PhysRevB.78.075404 ↗