Layout flexibility for sheet-to-sheet produced flexible ITO-free organic solar modules with organic functional layers slot die coated under ambient atmospheric conditions
Source abstract
Abstract
Abstract Four different module layouts for indium tin oxide (ITO)-free flexible organic solar modules with device performance varying from 1.8% to 2.7% are reported in this work. Module 1, with a device efficiency of 2.5% on an active area of 88 cm2, demonstrates the up scaling of small area cells to larger area modules. Module 2, with a device efficiency of 1.8% and 106.4 V on an active area of 32.6 cm2, demonstrates high voltage on a small area. Module 3, with a device efficiency of 2% on an active area of 60.8 cm2 with a hexagonal layout, demonstrates the flexibility in module layout. Module 4 built as a reference module device on small active area of 6.1 cm2 had a device efficiency of 2.7%. PEDOT:PSS together with a metal grid is the transparent hole contact replacing ITO. The reference modules were also built without the metal grid (only PEDOT:PSS has a hole contact) and measured under 2000 and 500 lx resulting in the modules without grid outperforming the ones with grid. Therefore for indoor applications modules can be processed even without the top metal grid for current collection which not only reduces the material cost and the number of processing step but also eliminates the major concern of depositing metal electrodes on top of organic layers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Solar cell efficiency tables (version 43)10.1002/pip.2452 ↗
2. 25th anniversary article: rise to power – OPV-based solar parks10.1002/adma.201302031 ↗
3. ITO-free flexible organic solar cells with printed current collecting grids10.1016/j.solmat.2010.08.011 ↗
4. Roll-to-roll gravure printing of organic photovoltaic modules—insulation of processing defects by an interfacial layer
5. ITO-free organic solar cells with roll-to-roll coated organic functional layers from non-halogenated solvents10.1016/j.solmat.2014.02.001 ↗
6. Longterm stability of efficient inverted P3HT:PCBM solar cells10.1016/j.solmat.2008.12.022 ↗
7. Scaling up ITO-free solar cells10.1002/aenm.201300498 ↗
8. Optimal geometric design of monolithic thin-film solar modules: architecture of polymer solar cells10.1016/j.solmat.2011.09.037 ↗
9. Promising long-term stability of encapsulated ITO-free bulk-heterojunction organic solar cells under different aging conditions10.1016/j.solmat.2014.07.004 ↗
10. Printed metal back electrodes for R2R fabricated polymer solar cells studied using the LBIC technique10.1016/j.solmat.2010.11.007 ↗
11. Influence of cathode sputter deposition on organic solar cells10.1063/1.2472719 ↗
12. Characterization of photovoltaic modules for low-power indoor application10.1016/j.apenergy.2012.07.001 ↗