journal article·2012-10

Relation between solar cell efficiency and crystal defect etching induced by acidic texturization on multicrystalline silicon material

Jan Nievendick, Martin Zimmer, Floor Souren, Jonas Haunschild, Jochen Rentsch

Publisher page

Abstract

Abstract Acidic texturing of multi crystalline silicon (mc-Si) wafers often leads to rough surfaces with areas of strong etch attacks which we call trench structures. Particularly at sites containing crystal defects such as grain boundaries and dislocations, trench structures are created. These trench structures have often been reported as detrimental to solar cell performance. In this paper, a detailed statistical analysis of the influence of trench structures on solar cell efficiency is carried out. It is shown that their influence on cell efficiency, as well as open circuit voltage, short circuit current and fill factor, is only very minor. The material quality determines the diffusion length of the minority carriers and predominantly impacts the solar cell efficiency. Moreover, it has been established that trench structures do not significantly influence surface roughness and do not lead to shunting losses. However, the statistical model indicates that materials with many crystal defects, and thus lower quality and a smoother (and hence more reflecting) texture lead to slightly higher efficiencies compared to solar cells with a rougher texture. The higher efficiency obtained with smoother textures for this kind of material might be caused by the absence of trench structures. Furthermore, it has been found in this work that for these acidic textures, surface roughness correlates to weighted reflection and hence only one of these parameters has to be determined to analyze an acidic texture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. A. Hauser, I. Melnyk E. Wefringhaus, F. Delahaye, G. Vilsmeier, P. Fath, Acidic texturisation of mc-Si using a high throughput in-line prototype system with no organic chemistry, in: W. Hoffmann, J.-L. Bal, H. Ossenbrink, W. Palz, P. Helm (Eds.), Proceedings of the 19th European Photovoltaic Solar Energy Conference, WIP-Munich, ETA-Florence, Paris, France, 2004, pp. 1094–1097.
2. Experimental studies on the mechanism of wet chemical etching of silicon in HF/HNO3 mixtures10.1149/1.2116727 ↗
3. Wolfram Kwapil, Jan Nievendick, Annika Zuschlag, Paul Gundel, Martin C. Schubert, Wilhelm Warta, Influence of surface texture on the defect-induced breakdown behavior of multicrystalline silicon solar cells, Progress in Photovoltaics: Research and Applications, (Article first published online: 18 jan 2012), doi: 10.1002/pip.122610.1002/pip.1226 ↗
4. G. Stokkan, S. Riepe, O. Lohne W. Warta, Spatially resolved modeling of the combined effect of dislocations and grain boundaries on minority carrier lifetime in multicrystalline silicon, Journal of Applied Physics, 101 (2007) 053515/053511–053519.
5. In-line measurement of “trench structures” caused by the texturization of mc-silicon solar cells10.1016/j.solmat.2011.06.030 ↗
6. H.W. D.L. Bätzner, A. Sauer, B. Hadam, L. Janßen, T. Pletzer, Acidic wet chemical texturistion of mc-si solar cells, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference Milan, Italy, 2007, pp. 1715–1718
7. S. Mathijssen, S. Braun, I. Melnyk, M. Michel, M. Schmidt, P. Fath, J. Prölß, S. Schotthöfer, O. Rogge, Survey of acid texturing and new innovative acid processes for mc solar wafers, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2009, pp. 1964–1967.
8. W. Kwapil, M. Kasemann, P. Gundel, M.C. Schubert, W. Warta O. Breitenstein, J. Bauer, A. Lotnyk, J.-M. Wagner, P.C.P. Bronsveld, G. Coletti, Physical mechanisms of breakdown in multicrystalline silicon solar cells, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2009, pp. 896–900.
9. Quality control of as-cut multicrystalline silicon wafers using photoluminescence imaging for solar cell production10.1016/j.solmat.2010.06.003 ↗
10. I. Röver, G. Roewer, K. Bohmhammel, K. Wambach, Reactivity of crystalline silicon in the system HF–HNO3–H2O ( a novel study), in: W. Hoffmann, J.-L. Bal, H. Ossenbrink, W. Palz, P. Helm (Eds.), Proceedings of the 19th European Photovoltaic Solar Energy Conference, WIP-Munich, ETA-Florence, Paris, France, 2004, pp. 895–898.
11. A. Krieg J. Wallach, S. Rein, Impact of surface structures on the inline vision inspection of antireflection coatings, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2009, pp. 2041–2044.
12. F.M.M. Souren, M.C.M. van de Sanden W.M.M. Kessels, J. Rentsch, Quantitative characterization of dry textured surfaces, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2009, pp. 1909–1913.
13. F.M.M. Souren Plasma Surface Texturing for Crystalline Silicon Solar Cells, Eindhoven University of Technology, The Netherlands, Freiburg, Germany, Eindhoven, 2009, pp. 113.
14. Cost-effective methods of texturing for silicon solar cells10.1016/S0927-0248(01)00177-5 ↗
15. J. Rentsch, J. Ackermann, K. Birmann, H. Furtwängler, J. Haunschild, G. Kästner, R. Neubauer, J. Nievendick, A. Oltersdorf, S. Rein, A. Schütte, M. Zimmer, R. Preu, Wet chemical processing for c-Si solar cells—status and perspectives, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2009, pp. 1113–1117.
16. M. Seitz, Optimierung saurer Ätzprozesse zur Texturierung von multikristallinen Siliciumwafern, in: Institut für Chemische und Elektrochemische Verfahrenstechnik, Hochschule Mannheim, Freiburg im Breisgau, 2008, pp. 61.
17. Revising the Pareto Chart10.1198/000313006X152243 ↗