Synthesis of CZTSe nanoink via a facile one-pot heating route based on polyetheramine chelation
Source abstract
Abstract
Abstract In this paper, we report a systematic study of the growth and evolution mechanism of quaternary Cu 2 ZnSnSe 4 (CZTSe) nanocrystals (NCs) in a polyetheramine solvent. To the best of our knowledge, this is the first study on the growth mechanism of CZTSe NCs based on polyetheramine chelation. Pure-phase CZTSe NCs were synthesized by a facile one-pot heating process. High-quality CZTSe NCs were easily obtained by mixing the precursors and simply heating them to the reaction temperature. Synthesis parameters, including reaction temperature, reaction time, and precursor concentration, which influence the morphology, size, and monodispersity of CZTSe NCs, were studied in detail. Time- and temperature-dependent experiments were performed to observe the growth of CZTSe NCs. The final CZTSe NCs were evolved from triangle-like Cu 2 Se crystals to pure spherical crystals. On the basis of detailed time-dependent shape and elemental composition evaluations, a possible asynchronous doping growth and formation mechanism is proposed. Moreover, the optical and electrical properties of pure CZTSe NCs were also investigated. The band gap of CZTSe was approximately 1.57 eV, which is close to the optimum value for solar photoelectric conversion. Further, the investigation of the current–voltage characteristics and Hall effect revealed p-type conduction, and the hole carrier concentration, hole mobility, and resistivity were found to be 3.11×10 18 cm −3 , 8.28 cm 2 /V-s, and 0.24 Ω-cm, respectively. These results indicate that CZTSe NCs are suitable for use as an absorber layer in low-cost solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Characterization of Cu2ZnSnS4 thin films prepared by vapor phase sulfurization10.1143/JJAP.40.500 ↗
2. Development of thin film solar cell based on Cu2ZnSnS4 thin films10.1016/S0927-0248(00)00088-X ↗
3. Determination of band gap energy (Eg) of Cu2ZnSnSe4 thin films: on the discrepancies of reported band gap values10.1063/1.3457172 ↗
4. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
5. T.K. Todorov, J. Tang, S. Bag, O. Gunawan, T. Gokmen, Y. Zhu, and D.B. Mitzi, Beyond 11% Efficiency: characteristics of State-of-the-Art Cu2ZnSn(S,Se)4 Solar Cells . Adv. Energy Mater. 2012, 10.1002/aenm.20120034810.1002/aenm.201200348 ↗
6. Thermally evaporated Cu2ZnSnS4 solar cells10.1063/1.3499284 ↗
7. 19.9%-efficient ZnO/CdS/CuInGaSe2 solar cell with 81.2% fill factor10.1002/pip.822 ↗
8. Effect of Cu/(Zn+Sn) ratio on the properties of co-evaporated Cu2ZnSnSe4 thin films10.1016/j.solmat.2009.09.005 ↗
9. Coevaporation of Cu2ZnSnSe4 thin films10.1063/1.3483760 ↗
10. Cu2ZnSnSe4 thin film solar cells produced by selenisation of magnetron sputtered precursors10.1002/pip.886 ↗
11. Fabrication and characterization of Cu2ZnSnS4 thin films deposited by spray pyrolysis technique10.1016/j.tsf.2006.12.144 ↗
12. Formation of Cu2ZnSnSe4 thin films by selenization of electrodeposited stacked binary alloy layers10.1016/j.egypro.2010.07.012 ↗
13. Pulsed laser deposition of quaternary Cu2ZnSnSe4 thin films10.1002/pssa.200723144 ↗
14. Structure, composition and optical properties of Cu2ZnSnS4 thin films deposited by Pulsed Laser Deposition method10.1016/j.solmat.2011.06.026 ↗
15. Mono grain materials for solar cells10.1016/j.solmat.2008.04.018 ↗
16. Device characteristics of a10.1% hydrazine-processed Cu2ZnSn(Se,S)4 solar cell10.1002/pip.1160 ↗
17. High-efficiency solar cell with earth-abundant liquid processed absorber10.1002/adma.200904155 ↗
18. Fabrication of Cu(In,Ga)Se2 thin films by a combination of mechanochemical and screen-printing/sintering processes10.1002/pssa.200669652 ↗
19. Nanoparticle-based approach for the formation of CIS solar cells10.1016/j.solmat.2008.09.061 ↗
20. Synthesis of Cu2ZnSnS4 nanocrystal ink and its use for solar cells10.1021/ja904981r ↗
21. Inkjet printed chalcopyrite CuInxGa1−xSe2 thin film solar cells10.1016/j.solmat.2011.05.011 ↗
22. Synthesis of CuInS2, CuInSe2, and Cu(InxGa1−x)Se2 (CIGS) nanocrystal inks for printable photovoltaics10.1021/ja805845q ↗
23. Synthesis of colloidal CuGaSe2, CuInSe2, and Cu(InGa)Se2 nanoparticles10.1021/cm801655w ↗
24. Fabrication of Cu2ZnSnS4 screen printed layers for solar cells10.1016/j.solmat.2010.06.010 ↗
25. Development of CuInSe2 nanocrystal and nanoring inks for low-cost solar cells10.1021/nl802042g ↗
26. Cu2ZnSnS4 thin film solar cells prepared by non-vacuum processing10.1016/j.solmat.2008.12.009 ↗
27. Synthesis of Cu2ZnSnS4 nanocrystals for use in low-cost photovoltaics10.1021/ja905922j ↗
28. Synthesis of CuInSe2 nanocrystals with trigonal pyramidal shape10.1021/ja8080605 ↗
29. Ternary I–III–VI quantum dots luminescent in the red to near-infrared10.1021/ja8036349 ↗
30. Fabrication of 7.2% Efficient CZTSSe solar cells using CZTS nanocrystals10.1021/ja108427b ↗
31. Hot-injection synthesis and characterization of quaternary Cu2ZnSnSe4 nanocrystals10.1016/j.matlet.2010.03.034 ↗
32. Preparation and photoelectrochemical properties of densely immobilized Cu2ZnSnS4 nanoparticle films10.1039/c0jm00454e ↗
33. Evolution pathway of CIGSe nanocrystals for solar cell applications10.1021/jp300187r ↗
34. Synthesis of Cu2SnSe3 nanocrystals for solution processable photovoltaic cells10.1021/ic301141w ↗
35. A colloidal synthesis of CuInSe2, CuGaSe2 and CuIn1−xGaxSe2 nanoparticles from di-isopropyldiselenophosphinato metal precursors10.1039/c1nr10888c ↗
36. Molecular solution approach to synthesize electronic quality Cu2ZnSnS4 thin films10.1021/ja312678c ↗
37. Device characteristics of a 10.1% hydrazine-processed Cu2ZnSn(Se,S)4 solar cell10.1002/pip.1160 ↗
38. Reaction pathways for the formation of Cu2ZnSn(Se,S)4 absorber materials from liquid-phase hydrazine-based precursor inks10.1039/c2ee21529b ↗
39. Cu2ZnSnSe4 absorbers processed from solution deposited metal salt precursors under different selenization conditions10.1002/pssa.201228003 ↗
40. Cu2ZnSnS4 (CZTS) nanoparticle based nontoxic and earth-abundant hybrid pn-junction solar cells10.1039/c2cp41062a ↗
41. Alkylthiol-enabled Se powder dissolution in oleylamine at room temperature for the phosphine-free synthesis of copper-based quaternary selenide nanocrystals10.1021/ja300064t ↗
42. Wurtzite Cu2ZnSnSe4 nanocrystals for high-performance organic–inorganic hybrid photodetectors10.1038/am.2012.2 ↗
43. Cu2ZnSnS4 nanocrystals and graphene quantum dots for photovoltaics10.1039/c1nr10425j ↗
44. Determination of band gap energy (Eg) of Cu2ZnSnSe4 thin films: on the discrepancies of reported band gap values10.1063/1.3457172 ↗
45. Radiative recombination in Cu2ZnSnSe4 monograins studied by photoluminescence spectroscopy10.1016/j.tsf.2008.11.024 ↗
46. Growth pressure Dependence of Cu2ZnSnSe4 properties10.1002/pssc.200982748 ↗
47. Morphological and structural characterization of Cu2ZnSnSe4 thin films grown by selenization of elemental precursor layers10.1016/j.tsf.2008.11.034 ↗
48. Stability and hydrolyzation of metal Organic frameworks with paddle-wheel SBUs upon hydration10.1021/cm301427w ↗
49. Raman microprobe characterization of electrodeposited S-rich CuIn„(S,Se) 2 for photovoltaic applications: Microstructural analysis10.1063/1.2734103 ↗
50. Phosphine-free synthesis of p-type copper(I) selenide nanocrystals in hot coordinating solvents10.1021/ja103223x ↗
51. Existence and removal of Cu2Se second phase in coevaporated Cu2ZnSnSe4 thin films10.1063/1.3691964 ↗
52. Facile synthesis of wurtzite copper–zinc–tin sulfide nanocrystals from plasmonic djurleite nuclei10.1039/C2TA00151A ↗
53. Wurtzite ZnSe quantum dots: synthesis, characterization and PL properties
54. Physical And Inorganic Chemistry10.1021/ja00905a001 ↗
55. Cu2SnSe3 and alloyed(ZnSe)x(Cu2SnSe3)1−x nanocrystals with a metastable zincblende and wurtzite structure10.1016/j.jcrysgro.2012.07.045 ↗
56. A mild solvothermal route to kesterite quaternary Cu2ZnSnS4 nanoparticles10.1016/j.jcrysgro.2010.10.071 ↗
57. Solvothermal synthesis and characterization of chalcopyrite cuinse2 nanoparticles10.1007/s11671-009-9468-6 ↗