Efficient bulk heterojunction solar cells using an alternating phenylenevinylene copolymer with dithenyl(thienothiadiazole) segments as donor and PCBM or modified PCBM as acceptor
Source abstract
Abstract
Abstract A novel low band gap alternating phenylenevinylene copolymer, P, with dithenyl (thienothiadiazole) segments was synthesized by Heck coupling. It was soluble in common organic solvents, showed broad absorption curve with long-wavelength absorption maximum at 580–598 nm and optical band gap of 1.74 eV, which is comparable with the electrochemical band gap of about 1.80 eV. P (electron donor) was blended with PCBM or modified PCBM i.e. F (electron acceptor) to fabricate bulk heterojunction (BHJ) solar cells. The power conversion efficiency (PCE) of the devices based on P:PCBM and P:F cast from 1.2-dichlorobenzene (DCB) was found to be 1.40% and 2.32%, respectively. The higher value of PCE for the device with P:F as compared to P:PCBM is attributed to the increase in both short circuit current (Jsc) and open circuit voltage (Voc). The increase in the Jsc is due to the stronger light absorption of F in visible region as compared to PCBM, i.e. more exciton generation in the blend. On the other hand, the higher difference between the LUMO levels of P and F, as compared to P and PCBM is responsible for the enhancement in the Voc. A maximum overall PCE of 4.20% was obtained for the BHJ polymer cell based on the active layer (P:F) deposited from mixed solvents 1-chloronapthalene/1,2-dichlorobenzene (CN/DCB) and subsequent thermal annealing at 120 °C. This improvement in the PCE has been attributed to the enhanced crystallinity of the blend and more balanced charge transport in the device due to the thermal treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Efficient methano[70]fullerene/MDMO-PPV bulk heterojunction photovoltaic cells10.1002/anie.200351647 ↗
3. Nanoscale morphology of conjugated polymer/fullerene-based bulk-heterojunction solar cells10.1002/adfm.200305026 ↗
4. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
5. Thermally stable efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
6. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
7. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells10.1038/nmat1574 ↗
8. Simultaneous use of small- and wide-angle X-ray techniques to analyze nanometer-scale phase separation in polymer heterojunction solar cells10.1002/adma.200703097 ↗
9. Highly efficient solar cell polymers developed via fine-tuning of structural and electronic properties10.1021/ja901545q ↗
10. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
11. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
12. Synthesis of a low band gap polymer and its application in highly efficient polymer solar cells10.1021/ja9064975 ↗
13. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
14. Novel two-dimensional donor-acceptor conjugated polymers containing quinoxaline units: synthesis, characterization, and photovoltaic properties10.1002/pola.22745 ↗
15. Efficient solar cells based on a new phthalimide-based donor–acceptor copolymer semiconductor: morphology, charge-transport, and photovoltaic properties10.1039/b900073a ↗
16. Synthesis and photovoltaic properties of diketopyrrolopyrrole-based donor–acceptor copolymers10.1021/cm901487f ↗
17. Synthesis, characterization, and devices of a series of alternating copolymers for solar cells10.1021/cm802949g ↗
18. A planar copolymer for high efficiency polymer solar cells10.1021/ja9057986 ↗
19. Soluble phenanthrenyl-imidazole-presenting regioregular poly(3-octylthiophene) copolymers having tunable bandgaps for solar cell applications10.1002/adfm.200700423 ↗
20. Intramolecular donor–acceptor regioregular poly(3-hexylthiophene)s presenting octylphenanthrenyl-imidazole moieties exhibit enhanced charge transfer for heterojunction solar cell applications10.1002/adfm.200701150 ↗
21. Intramolecular donor–acceptor regio regular poly(hexyl-phenanthrenyl-imidazole thiophene) exhibits enhanced hole mobility for heterojunction solar cell applications10.1002/adma.200802379 ↗
22. Development of new conjugated polymers with donor-π-bridge-acceptor side chains for high performance solar cells10.1021/ja9066139 ↗
23. Synthesis and characterization of donor–bridge–acceptor alternating copolymers containing perylene diimide units and their application to photovoltaic cells10.1002/pola.23889 ↗
24. Bandgap and molecular level control of the low-bandgap polymers based on 3.6-dithiophen-2-yl-2.5-dihydropyrrolo[3.4-c]pyrrole-1.4-dione toward highly efficient polymer solar cells10.1021/ma9012972 ↗
25. Development of new semiconducting polymers for high performance solar cells10.1021/ja808373p ↗
26. Synthesis of acenaphthyl and phenanthrene based fused-aromatic thienopyrazine co-polymers for photovoltaic and thin film transistor applications10.1021/cm900788e ↗
27. Diketopyrrolopyrrole-based semiconducting polymer for photovoltaic device with photocurrent response wavelengths up to 1.1μm10.1021/ma902398q ↗
28. Donor–acceptor polymers incorporating alkylated dithienylbenzothiadiazole for bulk heterojunction solar cells: pronounced effect of positioning alkyl chains10.1021/ma902241b ↗
29. Synthesis and characterization of a narrow-bandgap polymer containing alternating cyclopentadithiophene and diketo-pyrrolo-pyrrole units for solar cell applications10.1002/pola.23931 ↗
30. π-Conjugated donor–acceptor copolymers constituted of π-excessive and π-deficient arylene units. optical and electrochemical properties in relation to CT structure of the polymer10.1021/ja961550t ↗
31. λ4σ2-sulfur heterocycles. An ab initio and density functional study10.1021/jo961776e ↗
32. Syntheses of narrow band gap heterocyclic copolymers of aromatic-donor and quinonoid-acceptor units10.1016/0379-6779(94)02587-O ↗
33. Synthesis of novel thiophene-based oligomers and polymers with thienothiadiazole units10.1002/masy.200850821 ↗
34. Low-band gap copolymers containing thienothiadiazole units: synthesis, optical, and electrochemical properties10.1002/pola.24022 ↗
35. Synthesis of a narrow band gap heterocyclic polymer: poly[4.6-di(2-thienyl)thieno[3.4-c][1.2.5]thiadiazole]10.1016/0379-6779(93)90233-M ↗
36. Low band gap conjugated small molecules containing benzobisthiadiazole and thienothiadiazole central units: synthesis and application for bulk heterojunction solar cells10.1039/c0jm03436c ↗
37. Fullerene bisadducts for enhanced open-circuit voltages and efficiencies in polymer solar cells10.1002/adma.200702438 ↗
38. Indene-C60 bisadduct: a new acceptor for high-performance polymer solar cells10.1021/ja908602j ↗
39. Thienyl-substituted methanofullerene derivatives for organic photovoltaic cells10.1039/B916597E ↗
40. Towards optimization of P3HT:bisPCBM composites for highly efficient polymer solar cells10.1039/c0jm00790k ↗
41. Electron trapping in higher adduct fullerene-based solar cells10.1002/adfm.200900459 ↗
42. Endohedral fullerenes for organic photovoltaic devices10.1038/nmat2379 ↗
43. Tuning conversion efficiency in metallo endohedral fullerene-based organic photovoltaic devices10.1002/adfm.200900214 ↗
44. High-yield synthesis and electrochemical and photovoltaic properties of indene-C70 bisadduct10.1002/adfm.201001122 ↗
45. 6.5% Efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene-c60 bisadduct by device optimization10.1002/adma.201001339 ↗
46. A simple and effective modification of PCBM for use as an electron acceptor in efficient bulk heterojunction solar cells10.1002/adfm.201001807 ↗
47. Synthesis of functionalized styrenes via palladium-catalyzed coupling of aryl bromides with vinyl tin reagents10.1021/jo00379a020 ↗
48. New polyphenylene- and polyphenylenevinylene-based copolymers containing triarylpyrazoline units in the main chains10.1002/pola.21929 ↗
49. Metal ion sensor10.1021/ma901879t ↗
50. Thieno[3.4-b]pyrazines: synthesis, structure, and reactivity10.1021/jo0262255 ↗
51. Synthesis and photovoltaic performance of a series of small band gap polymers10.1039/b821979f ↗
52. An alternating low band-gap polyfluorene for optoelectronic devices10.1016/j.polymer.2006.03.110 ↗
53. Combined spectroscopic and theoretical study of narrow band gap heterocyclic co-oligomers containing alternating aromatic donor and o-quinoid acceptor units10.1021/jp0312262 ↗
54. Design, synthesis, and self-assembly of oligothiophene derivatives with a diketopyrrolopyrrole core10.1021/jp804816c ↗
55. Red emitting diphenylpyrrolopyrrole (DPP)-based polymers prepared by Stille and Heck coupling10.1002/macp.200600363 ↗
56. Triphenylamine-fluorene alternating conjugated copolymers with pendant acceptor groups: synthesis, structure-property relationship, and photovoltaic application10.1021/ma900236h ↗
57. Electrochemical properties of luminescent polymers and polymer light-emitting electrochemical cells10.1016/S0379-6779(99)00007-7 ↗
58. Synthesis and electroluminescence of novel copolymers containing crown ether spacers10.1039/b209469j ↗
59. Conjugated donor–acceptor copolymer semiconductors with large intramolecular charge transfer: synthesis, optical properties, electrochemistry, and field effect carrier mobility of thienopyrazine-based copolymers10.1021/ma061861g ↗
60. Temperature dependent characteristics of poly(3-hexylthiophene)-fullerene based heterojunction organic solar cells10.1063/1.1545162 ↗
61. Electrical characteristics and efficiency of single-layer organic light-emitting diodes10.1103/PhysRevB.58.R13411 ↗
62. Effect of interchain interactions on the absorption and emission of poly(3-hexyl-thiophene)10.1103/PhysRevB.67.064203 ↗
63. Improving performance of polymer photovoltaic devices using an annealing-free approach via construction of ordered aggregates in solution10.1039/b719945g ↗
64. Charge transport and photocurrent generation in poly(3-hexylthiophene):methanofullerene bulk-heterojunction solar cells10.1002/adfm.200500420 ↗
65. Toward high-performance polymer solar cells: the importance of morphology control10.1021/ma0618732 ↗
66. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
67. Effects of solvent mixtures on the nanoscale phase separation in polymer solar cells10.1002/adfm.200701459 ↗
68. Effects of postproduction treatment on plastic solar cells10.1002/adfm.200390011 ↗
69. Nanoscale morphology of high-performance polymer solar cells10.1021/nl048120i ↗
70. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
71. Improved performance of polymer bulk heterojunction solar cells through the reduction of phase separation via solvent additives10.1002/adma.200903677 ↗
72. Effect of processing additive on the nanomorphology of a bulk heterojunction material10.1021/nl101923m ↗
73. Incorporation of furan into low band-gap polymers for efficient solar cells10.1021/ja108115y ↗
74. Morphology evolution of spin-coated films of poly(thiophene-phenylene-thiophene) and [6,,6]-phenyl-c71-butyric acid methyl ester by solvent effect10.1021/ma1000157 ↗
75. Solvent mixtures for improving device efficiency of polymer photovoltaic devices10.1063/1.2898153 ↗
76. Photovoltaic properties of poly(benzothiadiazole-thiophene-co-bithiophene) as donor in polymer solar cells10.1016/j.solmat.2010.10.007 ↗
77. Efficiency enhancement in small molecule bulk heterojunction organic solar cells via additive10.1063/1.3491268 ↗
78. Solubility of fullerene (C60) in a variety of solvents10.1021/j100115a049 ↗
79. Space charge limited current measurements on conjugated polymer films using conductive atomic force microscopy10.1021/nl080155l ↗
80. Hole transport in poly(phenylenevinylene)/methanofullerene bulk-heterojunction solar cells10.1002/adfm.200305156 ↗
81. Malliaras · Phys. Rev. B · 1998 · 58 · R1341110.1103/PhysRevB.58.R13411 ↗
82. Regiocontrolled synthesis of poly(3-alkylthiophenes) mediated by rieke zinc: their characterization and solid-state properties10.1021/ja00106a027 ↗
83. Thermochromic and solvatochromic effects in poly(3-hexylthiophene)10.1016/0379-6779(88)90110-5 ↗
84. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗