journal article·2014-12

PassDop rear side passivation based on Al2O3/a-SiCx:B stacks for p-type PERL solar cells

Bernd Steinhauser, Ulrich Jäger, Jan Benick, Martin Hermle

Publisher page

Abstract

In this study we present a new approach for p-type PERL solar cells based on an Al2O3 passivation in combination with boron doped amorphous SiCx. During a laser diffusion process, the rear side passivation is locally opened and simultaneously dopants are driven from the stack into the silicon to create a local back surface field resulting in a sheet resistance in the range of 15 Ω/sq. We show that the main contribution to the dopants in the local back surface field originates from the a-SiCx:B layer, while aluminum is mainly present near the surface. This p-type PassDop stack is compatible with a firing step, reaching surface recombination velocities lower than 3 cm/s. With this stack, small area solar cells on p-type float-zone silicon were processed, achieving energy conversion efficiencies up to 21.4% and fill factors of up to 82.5% with PVD contacts in a proof-of-concept batch.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Laser-fired rear contacts for crystalline silicon solar cells10.1002/pip.422 ↗
2. Industrially feasible rear passivation and contacting scheme for high-efficiency n-type solar cells yielding a Voc of 700mV10.1109/TED.2010.2051194 ↗
3. A laser based process for the formation of a local back surface field for n-type silicon solar cells10.1016/j.tsf.2011.01.237 ↗
4. P-type c-Si solar cells based on rear side laser processing of Al2O3/SiCx stacks10.1016/j.solmat.2012.05.012 ↗
5. E. Cornagliotti, L. Tous, A. Uruena, A. Rothschild, R. Russel, V. Lu, S. Radosavjlevic, J. John, J. Toman, M. Aleman, F. Duerinckx, J. Poortmans, J. Szlufcuk, B. Dielissen, F. Souren, X. Gay, R. Görtzen, B. Hallam, Integration of spatial ALD aluminum oxide for rear side passivation of PERC/PERL solar cells, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference and Exhibition, Paris, France, 2013, pp. 976–981.
6. M. Rüdiger, M. Rauer, C. Schmiga, M. Hermle, S.W. Glunz, Accurate modeling of aluminum-doped silicon, in: Proceedings of the 1st International Conference on Silicon Photovoltaics, Elsevier Energy Procedia, Freiburg, Germany, 2011, pp. 527–532.10.1016/j.egypro.2011.06.177 ↗
7. Alloying from screen-printed aluminum pastes containing boron additives10.1109/JPHOTOV.2012.2217113 ↗
8. Contactless determination of current–voltage characteristics and minority-carrier lifetimes in semiconductors from quasi-steady-state photoconductance data10.1063/1.117723 ↗
9. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
10. Excellent silicon surface passivation with 5Å thin ALD Al2O3 layers: influence of different thermal post-deposition treatments10.1002/pssr.201105188 ↗
11. B. Fischer, Loss Analysis of Crystalline Silicon Solar Cells using Photoconductance and Quantum Efficiency Measurements, Dissertation. Fachbereich Physik, University of Konstanz, Konstanz, 2013, p. 198
12. Alloying from screen-printed aluminum pastes containing boron additives