Understanding the influence of shunts in the I–V curves and electroluminescence of multijunction solar cells
Source abstract
Abstract
The influence of shunts on multijunction solar cells cannot be directly extrapolated from their effect on single junction solar cells. It is shown that the rules of thumb for single junction solar cells can mislead to wrong diagnosis on multijunction solar cells when they are only partially shunted. In order to properly assess their performance, three dimensional simulations have been carried out using equivalent electrical circuits. In this work, we point out the differences between completely and partially shunted multijunction solar cells under different regimes and evaluate the use of I V curves and electroluminescence as valid tools to detect the existence of shunts. A straightforward application of this work is its use in reliability analysis, allowing an undoubtedly identification of shunts at both the solar cell manufacture and on-field operation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: solar cell performance optimization · Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Spectral response measurements of monolithic GaInP/Ga(In)As/Ge triple-junction solar cells: measurement artifacts and their explanation10.1002/pip.514 ↗
2. Elimination of artifacts in external quantum efficiency measurements for multijunction solar cells using a pulsed voltage bias10.1109/JPHOTOV.2013.2242959 ↗
3. Implications of low breakdown voltage of component subcells on external quantum efficiency measurements of multijunction solar cells10.1002/pip.2597 ↗
4. Spectral response measurement of double-junction thin-film photovoltaic devices: the impact of shunt resistance and bias voltage10.1088/0957-0233/22/4/045902 ↗
5. The effect of shunt resistance on External Quantum Efficiency measurements at high light bias conditions
6. Analysis of a multi-junction solar cell with shunted subcells using SPICE10.1088/1742-6596/690/1/012040 ↗
7. Current-limiting behavior in multijunction solar cells10.1063/1.3596444 ↗
8. Hot spot tests for crystalline silicon modules
9. Ohmic shunts in two-terminal dual-junction solar cells with current mismatch10.7567/JJAP.56.08MA05 ↗
10. Lombardero · 2018
11. Extended triple-junction solar cell 3D distributed model: application to chromatic aberration-related losses
12. A 3-D model for concentrator solar cells based on distributed circuit units10.1109/TED.2005.859620 ↗
13. On the detection of shunts in silicon solar cells by photo- and electroluminescence imaging10.1002/pip.803 ↗
14. Modeling of the resistive losses due to the bus-bar and external connections in III-V high-concentrator solar cells10.1109/TED.2002.803638 ↗
15. Comparison of 1D and 3D analysis of the front contact influence on GaAs concentrator solar cell performance10.1016/j.solmat.2006.02.013 ↗
16. Study of non-uniform light profiles on high concentration III-V solar cells using quasi-3D distributed models
17. Analysis of perimeter recombination in the subcells of GaInP/GaAs/Ge triple-junction solar cells10.1002/pip.2501 ↗
18. Extended description of tunnel junctions for distributed modeling of concentrator multi-junction solar cells10.1016/j.solmat.2011.05.009 ↗
19. Espinet González · 2012
20. 2017 · 1247
21. Quantitative evaluation of shunts in solar cells by lock-in thermography10.1002/pip.520 ↗
22. Four-junction wafer-bonded concentrator solar cells10.1109/JPHOTOV.2015.2501729 ↗
23. Building a six-junction inverted metamorphic concentrator solar cell10.1109/JPHOTOV.2017.2778567 ↗
24. Incorporation of hydrogen into MBE-grown dilute nitride GaInNAsSb layers in a MOCVD growth ambient10.1016/j.solmat.2018.05.043 ↗
25. Spectral mismatch correction and spectrometric characterization of monolithic III-V multi-junction solar cells10.1002/pip.407 ↗
26. Multijunction solar cell model for translating I-V characteristics as a function of irradiance, spectrum, and cell temperature10.1002/pip.965 ↗
27. Current-matching estimation for multijunction cells within a CPV module by means of component cells
28. Solar cell fill factors: general graph and empirical expressions10.1016/0038-1101(81)90062-9 ↗
29. Electroluminescence and photoluminescence characterization of multijunction solar cells10.1109/JPHOTOV.2012.2213801 ↗
30. Failure analysis on lattice matched GaInP/Ga(In)As/Ge commercial concentrator solar cells after temperature accelerated life tests
31. Performance mapping of multijunction solar cells based on electroluminescence10.1109/LED.2009.2024335 ↗
32. Explanation for the dark I-V curve of III-V concentrator solar cells10.1002/pip.805 ↗
33. Reciprocity relation between photovoltaic quantum efficiency and electroluminescent emission of solar cells10.1103/PhysRevB.76.085303 ↗
34. Internal voltages in GaIn/PGaInAs/Ge multijunction solar cells determined by electroluminescence measurements10.1063/1.2903101 ↗
35. Generalized optoelectronic model of series-connected multijunction solar cells10.1109/JPHOTOV.2015.2478072 ↗