Development of low-melting point molten salts and detection of solid-to-liquid transitions by alternative techniques to DSC
Source abstract
Abstract
The ‘Solar salt’ (60% NaNO3-40% KNO3, wt. %) is the most used heat transfer and storage material in high temperature CSP systems. The main drawback is its high melting temperature of 228 °C, which requires extra-energy to keep it in the liquid state and avoid damage to pipes at low temperatures. Multi-component salts are combinations of different cations and anions. The difference in size of the ions hinders the crystallization of the material and provides lower melting temperatures. Multi-component salts are considered in this study to replace simpler combinations, such as binary and ternary eutectic mixtures. Herein, we report on two novel six-component nitrates with a melting temperature of 60–75 °C and a thermal stability up to ~500 °C under a linear heating program in N2 atmosphere. Properties such as the thermal conductivity in solid and molten state, heat capacity and vibrational spectra were evaluated. The study of the thermal behaviour of these materials using differential scanning calorimetry was insufficient, hence alternative and complementary techniques were used, such as: the three-omega technique, optical transmission and Raman spectroscopy. Multi-component salts were found to solidify as amorphous solids even at slow cooling rates and water was found to behave as a catalyst of crystallization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Heat transfer fluids for concentrating solar power systems – a review10.1016/j.apenergy.2015.01.125 ↗
2. Concentrated solar power plants: review and design methodology10.1016/j.rser.2013.01.032 ↗
3. Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies10.1016/j.rser.2015.09.026 ↗
4. Thermal energy storage (TES) for industrial waste heat (IWH) recovery: a review10.1016/j.apenergy.2016.06.147 ↗
5. Review on system and materials requirements for high temperature thermal energy storage. Part 1: general requirements10.1016/j.rser.2016.11.119 ↗
6. Thermal energy storage materials and systems for solar energy applications10.1016/j.rser.2016.10.021 ↗
7. Medium temperature solar concentrators (Parabolic-Troughs collectors)
8. Concentrating solar power: a review of the technology
9. High-temperature stability of nitrate/nitrite molten salt mixtures under different atmospheres10.1016/j.apenergy.2018.05.101 ↗
10. Overview of molten salt storage systems and material development for solar thermal power plants
11. A comprehensive review of thermal energy storage
12. Thermal energy storage systems for concentrated solar power plants10.1016/j.rser.2017.03.139 ↗
13. Review of commercial thermal energy storage in concentrated solar power plants: steam vs. molten salts10.1016/j.rser.2017.05.084 ↗
14. LiNO3-NaNO3-KNO3 salt for thermal energy storage: thermal stability evaluation in different atmospheres10.1016/j.tca.2013.02.029 ↗
15. Novel low melting point quaternary eutectic system for solar thermal energy storage10.1016/j.apenergy.2012.09.001 ↗
16. Development of molten salt heat transfer fluid with low melting point and high thermal stability10.1115/1.4004243 ↗
17. Preparation and thermal properties of quaternary mixed nitrate with low melting point10.1016/j.solmat.2014.03.056 ↗
18. Development of new molten salts with LiNO3 and Ca(NO3)2 for energy storage in CSP plants10.1016/j.apenergy.2013.12.061 ↗
19. Evaluation of thermal physical properties of molten nitrate salts with low melting temperature10.1016/j.solmat.2017.11.011 ↗
20. Molten salts database for energy applications10.1016/j.cep.2013.07.008 ↗
21. Experimental investigation to the properties of eutectic salts by NaCl-KCl-ZnCl2 for application as high temperature heat transfer fluids
22. Improving the thermal properties of ternary carbonates for concentrating solar power through simple chemical modifications by adding sodium hydroxide and nitrate10.1016/j.solmat.2014.01.025 ↗
23. The preparation and properties of multi-component molten salts10.1016/j.apenergy.2009.06.022 ↗
24. An experimental study of a non-eutectic mixture of KNO3 and NaNO3 with a melting range for thermal energy storage10.1016/j.applthermaleng.2013.03.008 ↗
25. The thermal stability of molten lithium–sodium–potassium carbonate and the influence of additives on the melting point10.1115/1.4006895 ↗
26. Nitrate glasses10.1016/0025-5408(71)90042-0 ↗
27. Raman spectroscopic study of nitrate glasses10.1063/1.436912 ↗
28. Mechanisms behind the enhancement of thermal properties of graphene nanofluids10.1039/C8NR02762E ↗
29. Preparation and thermal properties of quaternary mixed nitrate with low melting point10.1016/j.solmat.2014.03.056 ↗
30. Coastal · 2009
31. Raman spectra and ionic interactions in molten nitrates10.1063/1.1731994 ↗
32. Raman and i.r. spectra of zinc, cadmium and calcium nitrate: a study of the low temperature phase transitions in calcium nitrate10.1016/0584-8539(76)80090-6 ↗