journal article·2018-06

Front side metallization of silicon solar cells by direct printing of molten metal

B. Gerdes, M. Jehle, N. Lass, L. Riegger, A. Spribille, M. Linse, F. Clement, R. Zengerle, P. Koltay

Publisher page

Abstract

Abstract In this work, a new approach for the front side metallization of silicon solar cells is presented. Molten solder (Sn96Ag3Cu) is directly printed in a non-contact manner on solar cell precursors via StarJet technology. The StarJet technology features a pneumatically driven, heatable printhead with a reservoir of molten metal and a star-shaped silicon nozzle chip. Using this printhead, a jet of molten metal with 55 µm ± 5 µm diameter is generated and used to apply busbars as well as contact fingers on prefabricated electroplated seed layers. After deposition via StarJet, printed fingers have a minimum width of 70 µm and a mean aspect ratio of 0.94. The printed metallization is evaluated optically and electrically. Aluminum back surface field silicon solar cells with front side electroplated NiAg seed layers and StarJet metallization (busbars and fingers) show efficiencies of up to 18.1% after degradation. Solder is about 30–40 times cheaper than silver and therefore may allow cost-efficient solar cell metallization. The StarJet metallization on electroplated NiAg seed layers is fully functional and requires no additional post-processing steps. Only 6 mg of Ag per cell are consumed for the seed layer. As a proof-of-principle, a module is demonstrated, which consists of four solar cells that are metallized via StarJet.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Advances in crystalline silicon solar cell technology for industrial mass production10.1038/asiamat.2010.82 ↗
2. ITRPV.net, International Technology Roadmap for Photovoltaics (ITRPV): results 2015, 2015.
3. X. Gao, R. Prunchak, F. Kleine Jaeger, S. Hermes, A. Ebong, A. Rohatgi, Forming high aspect ratio grid lines on crystalline solar cells, in: Proceedings of the 5th World Conference on Photovoltaic Energy Convers, 2010.
4. reliable metallization process for ultra fine line printing10.1016/j.egypro.2013.11.091 ↗
5. Fineline printing options for high efficiencies and low Ag paste consumption10.1016/j.egypro.2013.07.339 ↗
6. Record low ag paste consumption of 67.7 mg with dual print10.1016/j.egypro.2013.11.089 ↗
7. A. Spribille, T. Savisalo, A. Kraft, D. Eberlein, M. Ebert, T. Fellmeth, S. Nold, H. Pantsar, F. Clement, Towards a 300Wp p-Type HIP-MWT-module – simulation, experimental results and costs, 5 pages, in: Proceedings of the 32nd European Photovoltaic Solar Energy Conference and Exhibition, 2016, pp. 340–344.
8. S.K. Chunduri, M. Schmela, Taiyang News Market Survey Metallization Pastes 2017, 2017.
9. Dispensing technology on the route to an industrial metallization process10.1016/j.egypro.2015.03.297 ↗
10. X. Chen, K. Church, H. Yang, I.B. Cooper, A. Rohatgi, Improved front side metallization for silicon solar cells by direct printing, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference (PVSC), Seattle, WA, USA, 2011, pp. 3667–3671.10.1109/PVSC.2011.6185946 ↗
11. Flexographic printing – towards an advanced front side metallization approach with high throughput and low silver consumption10.1016/j.solmat.2016.07.025 ↗
12. Inkjet technology for crystalline silicon photovoltaics10.1002/adma.201403631 ↗
13. S.W. Glunz, A. Mette, M. Alemán, P.L. Richter, A. Filipovic, G. Willeke, New concepts for the front side metallization of silicon solar cells, 2006.
14. FraunhoferISE, 2015. Current and Future Cost of Photovoltaics. Long-term Scenarios for Market Development, System Prices and LCOE of Utility-Scale PV Sytems. Study on behalf of Agora Energiewende, available at 〈www.agora-energiewende.de〉.
15. 〈https://www.bloomberg.com/markets/commodities/futures/metals〉.
16. 〈http://www.lbma.org.uk/pricing-and-statistics〉.
17. T. Metz, G. Birkle, R. Zengerle, P. Koltay, StarJet: Pneumatic Dispensing of Nano- to Picoliter Droplets of Liquid Metal, in IEEE Proceedings of the 22nd International Conference on Micro Electro Mechanical Systems (MEMS), Sorrento, Italy, 2009, pp. 43–46.10.1109/MEMSYS.2009.4805314 ↗
18. Enhanced liquid metal micro droplet generation by pneumatic actuation based on the StarJet Method10.3390/mi4010049 ↗
19. Generation of high aspect ratio metal microstructures exhibiting low surface roughness by drop-wise printing of liquid metal10.1016/j.proeng.2015.08.791 ↗
20. Pneumatic dispensing of nano- to picoliter droplets of liquid metal with the StarJet method for rapid prototyping of metal microstructures10.1007/s10404-011-0850-1 ↗
21. B. Gerdes, M. Jehle, M. Domke, R. Zengerle, P. Koltay, L. Riegger, Drop-on-demand generation of aluminum alloy microdroplets at 950 °C using the StarJet technology, in: Proceedings of the 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Kaohsiung, 2017, pp. 690–693.10.1109/TRANSDUCERS.2017.7994142 ↗
22. The stability of ink-jet printed lines of liquid with zero receding contact angle on a homogeneous substrate10.1017/S0022112002003117 ↗
23. Surface tension of liquid metals10.1016/0022-3115(65)90113-3 ↗
24. Influence of silver paste rheology and screen parameters on the front side metallization of silicon solar cell10.1016/j.mssp.2014.08.023 ↗
25. Impurity-related limitations of next-generation industrial silicon solar cells10.1109/JPHOTOV.2012.2210030 ↗
26. S. Nold, N. Voigt, L. Friedrich, D. Weber, I. Hädrich, M. Mittag, H. Wirth, B. Thaidigsmann, I. Brucker, M. Hofmann, J. Rentsch, R. Preu, Cost Modeling of Silicon Solar Cell Production Innovation Along the PV Value Chain, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference and Exhibition, 2012.
27. Semiconductor Equipment and Materials International, E35-0312. Guide to calculate Cost of Ownership (COO) metrics for semiconductor manufacturing equipment, Semiconductor Equipment and Materials International (SEMI), San Jose, CA, USA, 2012.
28. Semiconductor Equipment and Materials International, E10-0814E. Specification for Definition and Measurement of Equipment Reliability, Availability, and Maintainability (RAM), Semiconductor Equipment and Materials International (SEMI), San Jose, CA, USA, 2014.