Preparation of high-quality Cu2ZnSnS4 thin films for solar cells via the improvement of sulfur partial pressure using a static annealing sulfurization approach
Source abstract
Abstract
Cu2ZnSnS4 (CZTS) thin films were prepared by spin-coating deposition of sol–gel precursor followed by sulfurization in sulfur atmosphere. A comparative study on the properties of the CZTS thin films sulfurized by using dynamic annealing and static annealing approaches was carried out. A higher sulfur partial pressure processed from static annealing was demonstrated. Static annealing contributed to the reduction of Sn loss. The CZTS thin films sulfurized by static annealing showed larger grains, better crystallinity and thinner MoS2 layer, but more ZnS on surface and minor Cu2−xS, SnS2 and SnS at the back surface. Diffusion of Zn into MoS2 layer was found to be associated with those minor secondary phases at the back surface. Solar cells incorporating the CZTS thin films sulfurized by static annealing exhibited a better cell performance with the device efficiency as high as 6.15%, which was further improved to 6.68% by using hydrochloric acid solution to etch ZnS at the surface and inhibiting the decomposition reaction of CZTS at the back surface based on the use of a thin ZnO nanolayer barrier.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Novel non-hydrazine solution processing of earth-abundant Cu2ZnSn(S,Se)4 absorbers for thin-film solar cells10.1039/c3ta10566k ↗
2. Development of thin film solar cell based on Cu2ZnSnS4 thin films10.1016/S0927-0248(00)00088-X ↗
3. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
4. The role of interparticle heterogeneities in the selenization pathway of Cu–Zn–Sn–S nanoparticle thin films: a real-time study10.1039/C5TC01139F ↗
5. High efficiency Cu2ZnSn(S,Se)4 solar cells by applying a double In2S3/CdS emitter10.1002/adma.201402373 ↗
6. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
7. Cu2ZnSnSe4 thin-film solar cells by thermal coevaporation with 11.6% efficiency and improved minority carrier diffusion length10.1002/aenm.201401372 ↗
8. Searching for a fabrication route of efficient Cu2ZnSnS4 solar cells by post-sulfuration of co-sputtered Sn-enriched precursors10.1039/C5TC02486B ↗
9. Compositional investigation of potassium doped Cu(In,Ga)Se2 solar cells with efficiencies up to 20.8%10.1002/pssr.201409040 ↗
10. On the Sn loss from thin films of the material system Cu-Zn-Sn-S in high vacuum10.1063/1.3273495 ↗
11. Defect formation and phase stability of Cu2ZnSnS4 photovoltaic material10.1103/PhysRevB.81.113202 ↗
12. The consequences of kesterite equilibria for efficient solar cells10.1021/ja111713g ↗
13. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
14. Fabrication of Cu2ZnSnS4 absorbers by sulfurization of Sn-rich precursors10.1002/pssa.201228064 ↗
15. Large-grained Cu2ZnSnS4 layers sintered from Sn-rich solution-deposited precursors10.1002/pssa.201431147 ↗
16. Cu2ZnSnSe4 thin film solar cells produced via co-evaporation and annealing including a SnSe2 capping layer10.1002/pip.2324 ↗
17. Co-evaporated Cu2ZnSnSe4 films and devices10.1016/j.solmat.2012.01.008 ↗
18. Investigating the role of grain boundaries in CZTS and CZTSSe thin film solar cells with scanning probe microscopy10.1002/adma.201103470 ↗
19. Rapid thermal processing annealing challenges for large scale Cu2ZnSnS4 thin films10.1002/pssa.201431387 ↗
20. Impact of solegel precursor treatment with preheating temperature on properties of Cu2ZnSnS4 thin film and its photovoltaic solar cell10.1016/j.jallcom.2015.09.028 ↗
21. Abundance of CuZn +SnZn and 2CuZn +SnZn defect clusters in kesterite solar cells10.1063/1.4768215 ↗
22. Fabrication of Cu2ZnSn(S,Se)4 solar cells via an ethanol-based sol−gel route using SnS2 as Sn source10.1021/am5026006 ↗
23. Growth and Raman scattering characterization of Cu2ZnSnS4 thin films10.1016/j.tsf.2008.11.031 ↗
24. XRD: Cu2S10.1107/S0365110X64000743 ↗
25. A detrimental reaction at the molybdenum back contact in Cu2ZnSn(S,Se)4 thin-film solar cells10.1021/ja308862n ↗
26. Thermodynamic aspects of the synthesis of thin-film materials for solar cells10.1002/cphc.201200067 ↗
27. Secondary phases dependence on composition ratio in sprayed Cu2ZnSnS4 thin films and its impact on the high power conversion efficiency10.1016/j.solmat.2013.06.008 ↗
28. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗
29. Raman spectroscopy of molybdenum oxides10.1039/b107046k ↗
30. Composition dependence of the structure and optical properties of Cu2MnxZn1−xSnS4 thin films10.1016/j.jallcom.2014.12.047 ↗
31. Control of an interfacial MoSe2 layer in Cu2ZnSnSe4 thin film solar cells: 8.9% power conversion efficiency with a TiN diffusion barrier10.1063/1.4740276 ↗
32. CZTS-based materials and interfaces and their effects on the performance of thin film solar cells
33. Device characteristics of a 10.1% hydrazine-processed Cu2ZnSn(Se,S)4 solar cell10.1002/pip.1160 ↗
34. Interface properties and band alignment of Cu2S/CdS thin film solar cells10.1016/S0040-6090(03)00190-1 ↗
35. Bandstructure, optical properties, and defect physics of the photovoltaic semiconductor SnS10.1063/1.3675880 ↗
36. Cd-free buffer layer materials on Cu2ZnSn(SxSe1−x)4: band alignments with ZnO, ZnS, and In2S310.1063/1.4714737 ↗
37. Inhibiting the absorber/Mo-back contact decomposition reaction in Cu2ZnSnSe4 solar cells: the role of a ZnO intermediate nanolayer10.1039/c3ta11419h ↗
38. Development of a selective chemical etch to improve the conversion efficiency of Zn-rich Cu2ZnSnS4 solar cells10.1021/ja301373e ↗
39. Fabrication of Cu2ZnSnS4 solar cells with 5.1% efficiency via thermal decomposition and reaction using a non-toxic sol–gel Route10.1039/C3TA13533K ↗
40. Improving the conversion efficiency of Cu2ZnSnS4 solar cell by low pressure sulfurization10.1063/1.4870508 ↗