Comparison of POCl3 diffusion and phosphorus ion-implantation induced gettering in crystalline Si solar cells
Source abstract
Abstract
Abstract Most p-type Si solar cells involves phosphorus-doped emitter by POCl 3 diffusion or phosphorus ion-implantation. Although the formation of the phosphorus emitter is known to getter impurities like Fe, the difference in the impact of these two gettering techniques on cell performance is not well quantified. Therefore, this paper compares the gettering efficiency of POCl 3 diffusion and phosphorus ion-implantation on Czochralski(Cz) and cast quasi-mono Si wafers. Cz-Si wafers were used to measure bulk lifetime and iron concentration before and after POCl 3 diffusion and phosphorus implantation with different doses. Increase in phosphorus implantation dose improved the gettering efficiency by increasing bulk lifetime and decreasing iron concentration but remained inferior to POCl 3 diffusion partly due to single side gettering as opposed to double side gettering with higher phosphorus surface concentration during POCl 3 diffusion. Moreover, large-area solar cells were fabricated on cast quasi-mono and Cz-Si wafers to quantify the impact of these emitters on cell parameters. POCl 3 diffused cast quasi-mono cells showed ~0.4% higher efficiency due to higher bulk lifetime compared to phosphorus implanted emitter. However, phosphorus implanted Cz cells gave ~0.3% higher efficiency due to lower emitter saturation current, resulting from the benefit of in-situ oxide surface passivation during the implant anneal.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. ITRPV, International Technology Roadmap for Photovoltaic (ITRPV) 2014 Results, International Technology Roadmap for Photovoltaic, 2014. 〈www.itrpv.net〉.
2. Recombination activity of interstitial iron and other transition metal point defects in p- and n-type crystalline silicon10.1063/1.1812833 ↗
3. P-type versus n-type Silicon wafers: prospects for high-efficiency commercial Silicon Solar cells, electron devices10.1109/TED.2006.878026 ↗
4. Towards the tailoring of P diffusion gettering to as-grown silicon material properties10.4028/www.scientific.net/SSP.178-179.158 ↗
5. Electronic properties of interstitial iron and iron-boron pairs determined by means of advanced lifetime spectroscopy10.1063/1.2106017 ↗
6. Chemical natures and distributions of metal impurities in multicrystalline silicon materials10.1002/pip.690 ↗
7. Gettering in silicon photovoltaics: current state and future perspectives10.1002/pssa.200664516 ↗
8. Mechanisms of transition-metal gettering in silicon10.1063/1.1289273 ↗
9. Gettering in silicon10.1063/1.342714 ↗
10. Gettering impurities from crystalline silicon by phosphorus diffusion using a porous silicon layer10.1016/j.solmat.2004.09.017 ↗
11. Study of Gettering Mechanisms in Silicon: Competitive Gettering between Phosphorus Diffusion Gettering and Other Gettering Sites
12. A. Laades, K. Lauer, C. Maier, D. Alber, M. Bähr, J. Nutsch, J. Lossen, A. Lawerenz, Iron gettering in CZ silicon during the industrial solar cell process, in: Solid State Phenomena, Trans Tech Publication, 2010, pp. 381–38610.4028/www.scientific.net/SSP.156-158.381 ↗
13. Model describing phosphorus diffusion gettering of transition elements in silicon10.1063/1.102968 ↗
14. Iron distribution in silicon after solar cell processing: synchrotron analysis and predictive modeling10.1063/1.3575583 ↗
15. Gettering of impurities in solar silicon10.1016/S0927-0248(01)00179-9 ↗
16. Gold gettering in silicon by phosphorous diffusion and argon implantation: mechanisms and limitations10.1063/1.329407 ↗
17. Gettering of gold in silicon: a tool for understanding the properties of silicon interstitials10.1063/1.338264 ↗
18. Spitzer · High. -Effic. Ion. -Implant. Silicon Sol. Cells, Electron Devices, IEEE Trans. · 1984 · 31 · 546
19. High-throughput ion-implantation for low-cost high-efficiency silicon solar cells10.1016/j.egypro.2012.02.002 ↗
20. Measuring and interpreting the lifetime of silicon wafers10.1016/j.solener.2003.07.033 ↗
21. A fast, preparation-free method to detect iron in silicon10.1063/1.345063 ↗
22. Iron detection in crystalline silicon by carrier lifetime measurements for arbitrary injection and doping10.1063/1.1637136 ↗
23. Iron contamination in silicon technology10.1007/s003390051074 ↗
24. Iron detection in the part per quadrillion range in silicon using surface photovoltage and, Applied Physics Letters
25. On the electronic improvement of multi-crystalline silicon via gettering and hydrogenation10.1002/pip.775 ↗
26. Effect of dissociation of iron-boron pairs in crystalline silicon on solar cell properties10.1002/pip.594 ↗
27. Formation of Boron-doped region using spin-on dopant: investigation on the impact of metallic impurities10.1002/pip.818 ↗
28. Influence of phosphorus-induced point defects on a gold-gettering mechanism in silicon10.1063/1.327732 ↗
29. Material requirements for the adoption of unconventional silicon crystal and wafer growth techniques for high-efficiency solar cells10.1002/pip.2699 ↗