Efficient Cu(In,Ga)Se2 thin film solar cells with reduced thickness of ZnS(O,OH) Buffer Layer
Source abstract
Abstract
Abstract The influence of the buffer layer thickness and the thiourea concentration in chemical bath on the cell performance of ZnS(O,OH)/CIGS solar cells was investigated. It was found that a high efficiency CIGS solar cell could be achieved by increasing the thiourea concentration in the chemical bath deposition (CBD) solution even if a very thin ZnS(O,OH) buffer layer (10 nm) was used. As a result, the CBD deposition time could be shortened to one six as compared to that of thicker buffer layer thickness of 120 nm. The results are discussed in connection with the conduction band offset at the ZnS(O,OH)/CIGS interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. High efficiency Cu(In,Ga)Se2 thin film solar cells with CBD-ZnS buffer layers10.1016/S0927-0248(00)00289-0 ↗
2. 18% efficiency Cd-free Cu(In,Ga)Se2 thin-film solar cells fabricated using CBD-ZnS buffer layers10.1143/JJAP.41.L165 ↗
3. Band offset of high efficiency CBD-ZnS/CIGS thin film solar cells10.1016/S0040-6090(03)00265-7 ↗
4. Buffer layers and transparent conducting oxides for chalcopyrite Cu(In,Ga)(S,Se)2 based thin film photovoltaics: present status and current developments10.1002/pip.955 ↗
5. ZnO/ZnS(O,OH)/Cu(In,Ga)Se2/Mo solar cell with 18.6% efficiency
6. CIGS solar cells with efficiencies>20%: current status and new developments
7. New reaction kinetics for a high-rate chemical bath deposition of the Zn(S,O) buffer layer for Cu(In,Ga)Se2-based solar cells10.1002/pip.1244 ↗
8. Cadmium-free CIGS min-modules with ALD-grown Zn(O, S)-based buffer layers
9. Wide-gap Cu(In,Ga)Se2 solar cells with Zn(O,S) buffer layers prepared by atomic layer deposition
10. T. Kobayashi, T. Kumazawa, Z. Jehl-Li-Kao, T. Nakada, Solar Energy Materials and Solar Cells, http://dx.doi/org/10.1016/j.solmat.2013.05.052, in press
11. D.E. Tarrant, R.R. Gay, Commercialization of CIS-Based Thin-Film PV, Phase I Annual Technical Report, NREL/SR-520-28597, 2000.10.2172/758769 ↗
12. Yield issues on the fabrication of 30cm×30cm-sized Cu(In,Ga)Se2-based thin film modules10.1016/S0927-0248(02)00144-7 ↗
13. Performance Improvement of CIGS-based modules by depositing high-quality Ga-doped ZnO windows with magnetron sputtering10.1016/S0927-0248(00)00287-7 ↗
14. Comparison in cell performance of ZnS(O,OH)/CIGS solar cells using MOCVD-ZnO:B and Sputter-deposited ZnO:Al window layers10.1109/JPHOTOV.2013.2249556 ↗
15. Cd-free flexible Cu(In,Ga)Se2 thin film solar cells with ZnS(O,OH) buffer layers on Ti foils
16. Transparent conducting ZnO:B thin films grown by ultraviolet light assisted metal organic chemical vapor deposition using triethylboron for Cu(In,Ga)Se2 solar cells
17. Impacts of post-treatments on cell performance of CIGS solar cells with Zn-compound buffer layers10.1109/JPHOTOV.2012.2223456 ↗
18. T. Kobayashi, H. Yamaguchi, T. Nakada, Effects of combined heat and light-soaking on device performance of Cu(In,Ga)Se2 solar cells with ZnS(O,OH) buffer layer, Progress in Photovoltaics: Research and Applications, 10.1002/pip.2339, in press10.1002/pip.2339 ↗
19. Application of Zn-compound buffer layer for polycrystalline CuInSe2-based thin-film solar cells10.1143/JJAP.35.4383 ↗
20. N. Terada, A. Kirihara, T. Takahae, Y. Shiota, S. Niki, S. Ishizuka, H. Shibata, A. Yamada, K. Matsubara, Technical Digest of the 21st International Photovoltaic Science and Engineering Conference (PVSEC-21), Fukuoka, 2011.