journal article·2012-12

Electrochromic windows based on V2O5–TiO2 and poly (3,3-dimethyl-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepine) coatings

Sooyeun Kim, Minoru Taya

Publisher page

Abstract

Abstract The electrochromic window (ECW) based on poly (3,3-dimethyl-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepine), PProDOT-Me2, and V2O5–TiO2 coatings was fabricated for modulating optical transmittance. It exhibited the high contrast of optical transmittance change (ΔT %) to 68% at 580 nm, rapid color-switching time, electrochemically cyclic stability and optical memory. Also, the large-sized ECW of 305×508 mm2 was successfully fabricated. The Li+ insertion/extraction process of PProDOT-Me2 and V2O5–TiO2 films was monitored by cyclic voltammetry and the diffusion coefficient was calculated. The optical transmittance changes of the ECW were observed by applying potential steps. It demonstrated long-term electrochromic and electrochemical stability after over 150,000 cyclic switches. It was found that the response time of the ECW was rapid. It was five seconds for coloration and four seconds for bleaching in the ECW (25×25 mm2). The optical memory was the great advantage of the ECW.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Conducting polymers and applications · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Optical and photoelectric properties and color centers in thin films of tungsten oxide10.1080/14786437308227562 ↗
2. Granqvist · 1995
3. A novel electrophotographic system10.1364/AO.8.000192 ↗
4. Monk · 1995
5. Electrochromic materials and devices: present and future10.1016/S0254-0584(01)00575-2 ↗
6. N-Substituted poly(3,4-propylenedioxypyrrole)s: high gap and low redox potential switching electroactive and electrochromic polymers10.1021/ma021108x ↗
7. Twenty-five years of conducting polymers10.1039/b210718j ↗
8. Monk · 2007
9. Large-area smart glass and integrated photovoltaics10.1016/S0927-0248(02)00259-3 ↗
10. In situ colorimetric analysis of electrochromic polymers and devices10.1021/cm000097o ↗
11. Composite coloration efficiency measurements of electrochromic polymers based on 3,4-alkylenedioxy-thiophenes10.1021/cm020433w ↗
12. Enhanced contrast ratios and rapid switching in electrochromics based on poly(3,4-propylenedioxythiophene) derivatives10.1002/(SICI)1521-4095(199911)11:16<1379::AID-ADMA1379>3.0.CO;2-Q ↗
13. Electropolymerization kinetic study of 3,3-dimethyl-3,4-dihydro-2H-thieno[3,4-b][1,4] dioxepine and its optical optimization for electrochromic window applications10.1016/j.electacta.2010.04.075 ↗
14. Vanadia gel synthesis via peroxovanadate precursors10.1021/jp0021897 ↗
15. Template-based growth of various oxide nanorods by sol–gel electrophoresis10.1002/1616-3028(20020101)12:1<59::AID-ADFM59>3.0.CO;2-B ↗
16. Enhanced contrast ratio of an electrochromic window based on a V2O5–TiO2 composite film as a counter electrode10.1557/PROC-0928-GG14-26 ↗
17. S. Legenski, Characterization and development of a new switchable window, Thesis, 2004, pp. 21–22.
18. Vanadium and titanium oxides prepared by hydrolysis of alkoxides as insertion electrodes in lithium cells with polymeric electrolytes10.1016/0378-7753(90)80036-D ↗
19. Contrast, switching speed, and durability of V2O5–TiO2 film-based electrochromic windows10.1149/1.3031978 ↗
20. Gel electrolyte for solid-state electrochromic cell10.1149/1.2069512 ↗
21. Li insertion into Li–Ti–O spinels: voltammetric and electrochemical impedance spectroscopy study10.1149/1.1392321 ↗
22. Application of finite-diffusion models for the interpretation of chronoamperometric and electrochemical impedance responses of thin lithium insertion V2O5 electrodes10.1016/S0167-2738(01)00819-0 ↗
23. Preparation of mixed oxide MoO3–WO3 thin films by spray pyrolysis technique and their characterization10.1016/S0040-6090(00)01410-3 ↗