journal article·2015-01Open access

Sputtered metal oxide broken gap junctions for tandem solar cells

Forrest Johnson, Sang Ho Song, Joel Abrahamson, Richard Liptak, Eray Aydil, Stephen A. Campbell

Abstract

Abstract Broken gap metal oxide tunnel junctions have been created for the first time by sputtering. Using a ceramic ZnO–SnO2 target and a reactively sputtered copper target we deposited ZnSnO3 and Cu2O for the n-type and p-type layers, respectively. The band edges and work functions of these materials are suitable for favorable alignment with the bands of copper indium gallium selenide (CIGS) for a tandem CIGS-based solar cell applications. Total junction specific resistivities under 1 Ω-cm2 have been achieved with Ohmic current–voltage (I–V) characteristics pointing to a broken gap band alignment. Low temperature I–V measurements confirmed the lack of traps at the interface despite other measurements pointing to an interface where bands overlap. Cu2O films contained copper inclusions, but they were shown, by conductive atomic force microscopy, not to be the dominant paths for conduction across the junction. Post-deposition annealing of junctions demonstrated thermal stability up to 300 °C, and the ability to improve conduction and influence device material’s electron affinity by rapid thermal anneal (RTA). Optical transmission over 78% below a band gap of 2.4 eV was attained for as-deposited films.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Detailed balance limit of efficiency of p–n junction solar cells10.1063/1.1736034 ↗
2. Detailed balance limit of the efficiency of tandem solar cells10.1088/0022-3727/13/5/018 ↗
3. NREL, Best Research-Cell Efficiencies, in, 〈http://www.nrel.gov/ncpv/images/efficiency_chart.jpg〉, 2013.
4. M.A. Steiner, J.F. Geisz, I. Garcia, D.J. Friedman, A. Duda, W.J. Olavarria, M. Young, S.R. Kurtz, Effects of internal luminescence and internal optics on the Voc and Jsc of III–V solar cells, in: 39th Photovoltaic Specialists Conference, IEEE, Tampa, FL, 2013, pp. 1437–1442.10.1109/JPHOTOV.2013.2278666 ↗
5. J. Song, S.S. Li, C.H. Huang, T.J. Anderson, D. Crisalle, Modeling and simulation of a CuGaSe2/Cu(In1−x,Gax)Se2 tandem solar cell, in: Third World Conference Photovolt. Energy Convers., 1 (2003) 4.10.1016/S0038-1101(03)00289-2 ↗
6. II–VI compounds as the top absorbers in tandem solar cell structures10.1016/j.mseb.2004.05.054 ↗
7. Y.G. Xiao, Z.Q. Li, M. Lestrade, Z.M.S. Li, Modeling of CdZnTe and CIGS and tandem solar cells, in: 35th Photovoltaic Specialists Conference, IEEE, Honolulu, HI, 2010, pp. 4.10.1109/PVSC.2010.5616486 ↗
8. Performance analysis of AlGaAs/GaAs tunnel junctions for ultra-high concentration photovoltaics10.1088/0022-3727/45/4/045101 ↗
9. Tellurium doping of InGaP for tunnel junction applications in triple junction solar cells10.1016/j.jcrysgro.2010.09.050 ↗
10. Electrical and optical properties of TCO–Cu2O heterojunction devices10.1016/j.tsf.2004.06.180 ↗
11. Sze · Phys. Semicond. Dev. · 2007
12. Ultra-low resistive GaSb/InAs tunnel junctions10.1088/0268-1242/26/7/075021 ↗
13. Diffusion of impurities in polycrystalline silicon10.1063/1.1660842 ↗
14. Comparison of Be and C diffusion in heavily doped polycrystalline GaAs10.1063/1.112794 ↗
15. High-temperature degradation mechanism of Cu(In,Ga)Se2-based thin film solar cells10.1143/APEX.1.075002 ↗
16. Type II heterojunctions in the GaInAsSb/GaSb system10.1088/0268-1242/9/7/001 ↗
17. Oxidation mechanism of Cu2O to CuO at 600°C & 1050°C10.1007/s11085-004-7808-6 ↗
18. Evaluation of thermodynamic and kinetic stability of CuAlO2 and CuGaO210.1007/s10973-009-0454-0 ↗
19. Microstructural properties of (In,Ga)2Se3 precursor layers for efficient CIGS thin-film solar cells10.1016/j.solmat.2008.11.028 ↗
20. T. Minami, T. Miyata, T. Yamamoto, Stability of Transparent Conducting Oxide Films for Use at High Temperatures, in, AVS, Baltimore, Maryland (USA), 1999, pp. 1822-1826.10.1116/1.581897 ↗
21. Limits to doping in oxides10.1103/PhysRevB.83.075205 ↗
22. New n-type transparent conducting oxides10.1557/mrs2000.149 ↗
23. Diffusion of metals in silicon dioxide10.1149/1.2108827 ↗
24. F.J. Pern, R. Noufi, B. To, C. DeHart, X. Li, S.H. Glick, Degradation of ZnO-based window layers for thin-film CIGS by accelerated stress exposures, in: Reliability of Photovoltaic Cells, Modules, Components, and Systems, Proceedings of SPIE, San Diego, CA, 2008, pp. 70480P-70480P-70414.10.1117/12.795097 ↗
25. Electromigration and related failure mechanisms in integrated circuit interconnects10.1179/imr.1994.39.3.97 ↗
26. Properties of transparent zinc-stannate conducting films prepared by radio frequency magnetron sputtering10.1116/1.579592 ↗
27. Highly transparent and conductive zinc-stannate thin films prepared by RF magnetron sputtering10.1143/JJAP.33.L1693 ↗
28. Rapid thermal annealing effect on the characteristics of ZnSnO3 films prepared by RF magnetron sputtering10.1016/j.cap.2012.05.014 ↗
29. Surface passivation of semiconductors10.1116/1.1316388 ↗
30. Variable-range hopping and the hall coefficient in Si:As10.1016/0038-1098(87)90509-6 ↗
31. Rao · 1998
32. Ginley · 2011
33. Density-functional theory study of stability and subgap states of crystalline and amorphous Zn–Sn–O
34. ZnSnO3 with a LiNbO3-type structure10.1021/ja801843v ↗
35. Work function of transparent conducting multicomponent oxide thin films prepared by magnetron sputtering10.1016/S0257-8972(98)00592-1 ↗
36. Effect of oxygen content on structural and optical properties of single Cu2O film by reactive magnetron sputtering method10.1007/s12204-012-1318-5 ↗
37. Cuprite, paramelaconite and tenorite films deposited by reactive magnetron sputtering10.1016/S0169-4332(03)00108-9 ↗
38. Hall mobility of cuprous oxide thin films deposited by reactive direct-current magnetron sputtering10.1063/1.3589810 ↗
39. Binary copper oxide semiconductors: from materials towards devices
40. Optical absorption of Cu2O in the near infrared and the role of metallic inclusions10.1139/p80-047 ↗
41. Effect of electrode material on the resistance switching of Cu2O film10.1063/1.2822403 ↗
42. First-principles study of transparent p-type conductive SrCu2O2 and related compounds10.1103/PhysRevB.65.075111 ↗
43. The band alignment of Cu2O/ZnO and Cu2O/GaN heterostructures
44. Germanium–gallium arsenide heterojunctions10.1147/rd.43.0283 ↗
45. Universal alignment of hydrogen levels in semiconductors, insulators and solutions