journal article·2013-07

Influence of alkanediol series as processing additives in photo-active layer on the power conversion efficiency of polymer solar cells

Soo Won Heo, Kwan Wook Song, Min Hee Choi, Hwan Sool Oh, Doo Kyung Moon

Publisher page

Abstract

Abstract The alkanediol series such as 1,2-ethanediol, 1,3-propanediol, 1,4-butanediol, 1,6-hexanediol, 1,8-octanediol and 1,10-decanediol was introduced to poly(3-hexylthiophene, P3HT):[6,6]-phenyl-C61-butyric acid methyl ester (PCBM) based bulk-heterojunction (BHJ) polymer solar cells as processing additives. When 1,3-propanediol was introduced to photo-active layer as a processing additive, power conversion efficiency (PCE) was dramatically increased from 3.5% (for the reference device) to 5.3%. To investigate the causes of improvement of the PCE of PSCs after addition of alkanediol series, photon absorbance properties were observed using UV–vis spectroscopy and photoluminescence (PL). Then, the degree of crystallinity of P3HT was examined through X-ray analysis. In addition, changes in the nano-structure and surface morphology of P3HT:PCBM blend film were observed through AFM and TEM. The series resistance (RS) of the fabricated PSCs was 5.19 Ω cm2, and short circuit current density (JSC), open circuit voltage (VOC) and fill factor (FF) were 16.2 mA/cm2, 0.63 V and 51.9% respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. High-performance organic thin-film transistor based on a dipolar organic semiconductor10.1002/adma.201202441 ↗
2. Organic thin-film transistors for chemical and biological sensing10.1002/adma.201103334 ↗
3. Emission color tuning of copolymers containing polyfluorene, benzothiadiazole, porphyrin derivatives10.1016/j.eurpolymj.2012.06.002 ↗
4. Study on the wet processable antimony tin oxide (ATO) transparent electrode for PLEDs10.1016/j.jiec.2011.11.051 ↗
5. Study on the antimony tin oxide as a hole injection layer for polymer light emitting diodes10.1016/j.tsf.2012.01.040 ↗
6. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
7. Ultra fast and parsimonious materials screening for polymer solar cells using differentially pumped slot-die coating10.1021/am100505e ↗
8. Low band gap polymers for roll-to-roll coated polymer solar cells10.1021/ma1015903 ↗
9. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
10. Product integration of compact roll-to- roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
11. Roll-to-roll processing and product integration of polymer solar cells10.1039/b918441d ↗
12. Patternable brush painting process for fabrication of flexible polymer solar cells10.1016/j.solmat.2011.09.012 ↗
13. Patternable solution process for fabrication of flexible polymer solar cells using PDMS10.1016/j.solmat.2011.09.012 ↗
14. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
15. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
16. Device physics of polymer: fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
17. Enhanced performance and stability in polymer photovoltaic cells using lithium benzoate as cathode interfacial layer10.1016/j.solmat.2011.01.012 ↗
18. Solution-processable reduced graphene oxide as a novel alternative to PEDOT:PSS hole transport layers for highly efficient and stable polymer solar cells10.1002/adma.201102207 ↗
19. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
20. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure
21. Recombination and loss analysis in polythiophene based bulk heterojunction photodetectors10.1063/1.1521244 ↗
22. Effects of postproduction treatment on plastic solar cells10.1002/adfm.200390011 ↗
23. Influence of electronic transport properties of polymer–fullerene blends on the performance of bulk heterojunction photovoltaic devices10.1002/pssa.200404333 ↗
24. Nanoscale morphology of high-performance polymer solar cells10.1021/nl048120i ↗
25. Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene
26. Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene)
27. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
28. High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6) C61 blends10.1063/1.2006986 ↗
29. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
30. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells10.1038/nmat1574 ↗
31. Influence of solvent mixing on the morphology and performance of solar cells based on polyfluorene copolymer/fullerene blends10.1002/adfm.200500339 ↗
32. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
33. Transition from solution to the solid state in polymer solar cells cast from mixed solvents10.1021/ma801945h ↗
34. High-efficiency polymer photovoltaic devices from regioregular-poly(3-hexylthiophene-2,5-diyl) and [6,6]-phenyl-C61-butyric acid methyl ester processed with oleic acid surfactant
35. Efficient poly(3-hexylthiophene)-based bulk hetero-junction solar cells fabricated by an annealing-free approach10.1021/jp804909a ↗
36. Vanlaeke · Solar Energy Materials and Solar Cells · 2006 · 90 · 215010.1016/j.solmat.2006.02.010 ↗
37. Fabrication of OPVs by introducing a conductivity-enhanced hybrid buffer layer10.1016/j.solmat.2012.01.027 ↗