journal article·2011-01

Wide-gap a-Si1−C :H solar cells with high light-induced stability for multijunction structure applications

Ihsanul Afdi Yunaz, Hiroshi Nagashima, Daisuke Hamashita, Shinsuke Miyajima, Makoto Konagai

Publisher page

Abstract

Light-induced stability of various p-i-n type wide-gap a-Si 1 -x C x :H solar cells has been systematically investigated. The i-layers of all a-Si 1-x C x :H solar cells were prepared using a 60 MHz VHF-PECVD technique with monomethyl silane (SiH 3 CH 3 , MMS) as the carbon source. It was confirmed that device structures, especially the type of buffer layer and thickness of i-layer, strongly affect the degradation behavior of a-Si 1-x C x :H solar cells. The fabricated a-Si 1-x C x :H solar cells showed efficiency degradation of about 11-22% depending on device structure. Efficiency degradation of optimized a-Si 1-x C x :H solar cells was much better compared with those reported by other groups even with thinner i-layer. These results revealed that a-Si 1-x C x :H solar cells with optimized buffer layer and prepared using MMS as the carbon source have high light-induced stability. Moreover, we have also fabricated a-Si 1-x C x :H/a-Si:H tandem cells with a SiO x intermediate layer to examine the benefit of a-Si 1-x C x :H top cells. Up to now, V oc as high as 1.81 V and fill factor (FF) as high as 0.70 have been achieved. Thus, the fabricated a-Si 1- -x C x :H solar cell is promising to be used as the top cell in multijunction solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Theoretical analysis of amorphous silicon alloy based triple junction solar cells10.1143/JJAP.46.L1152 ↗
2. Fabrication of amorphous silicon carbide films using VHF-PECVD for triple-junction thin-film solar cell applications10.1016/j.solmat.2008.11.048 ↗
3. I.A. Yunaz, K. Hashizume, S. Miyajima, A. Yamada, M. Konagai, Wide-gap a-SiC:H solar cells with graded absorption layer for triple cell applications, in: Conference Record of the 33rd IEEE PVSC, 2008.10.1109/PVSC.2008.4922576 ↗
4. I.A. Yunaz, H. Nagashima, A. Yamada, M. Konagai, Amorphous silicon carbide solar cells with high open-circuit voltage for multi-junction cell applications, in: Technical Digest of the 18th International PVSEC, 2009.
5. Reversible conductivity changes in discharge-produced amorphous Si10.1063/1.89674 ↗
6. a-Si1−xCx:H alloys for multijunction solar cells10.1109/16.46372 ↗
7. Y.-M. Li, F. Jackson, R.R. Arya, A study of amorphous silicon–carbon alloy solar cells, in: Conference Record of the 23rd IEEE PVSC, 1993, pp. 850–854.
8. VHF-deposited a-SiC:H alloys for high-bandgap solar cells: combining high Voc and reasonable stability10.1557/PROC-377-645 ↗
9. Degradation behavior of amorphous silicon solar cells fabricated by mercury-sensitized photochemical vapor deposition with hydrogen dilution10.1063/1.115249 ↗
10. Correlation of light-induced enhancement of open-circuit voltage and structural change of heterogeneous silicon solar cells10.1557/PROC-715-A26.1 ↗
11. Effects of temperature and spectral irradiance on performance of silicon based thin film multijunction solar cells10.1143/JJAP.46.1398 ↗