Synchrotron-based spectroscopy for the characterization of surfaces and interfaces in chalcopyrite thin-film solar cells
Source abstract
Abstract
The experimental CISSY setup was constructed for the surface and interface analysis of chalcopyrite Cu(In1−xGax)(SySe1−y)2 “CIGSSe” thin-film solar cells operable as laboratory surface analysis system using commercial X-ray and UV sources or as end station at the BESSY synchrotron facility. It houses an X-ray spectrometer for X-ray emission (XES) and an electron analyzer for photoemission (PES) spectroscopy measurements. The techniques deliver information about the chemical and electronic sample structure on a complementary depth scale. With probing depths up to half a micrometer, XES provides information of the near-surface sample bulk. PES in contrast only probes the first monolayers of a sample and hence, is very surface sensitive. The special feature of the CISSY setup is the unique combination of these spectroscopies with in-system sputter and wet-chemical preparation capabilities. Furthermore, a programmable sample manipulator enables laterally resolved measurements or measurements while the sample is constantly moved, reducing damage of radiation sensitive material, as e.g. organics. This arrangement allows for the characterization of real-world sample surfaces and interfaces prepared under controlled conditions such as vacuum or inert gas. The main focus of the CISSY experiments is a better understanding of the solar cell functioning mechanisms by combining the knowledge of the chemical and electronic structures gained by spectroscopic investigation of involved components and the physical device properties. The paper will give an overview of important results from eight years of CISSY research. In that period of time CISSY has tackled three main research areas: (i) the CIGSSe absorber layer; (ii) the buffer/absorber interface; and (iii) laterally resolved and time-resolved measurements, particularly of chalcopyrite thin-film solar cell components and structures. This review will focus on some examples out of these topics including results which could only be obtained by the combination of in-system preparation and analysis capabilities as realized by the CISSY setup.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (87)
Show source-provided references
1. Solar cell efficiency tables (version 35)10.1002/pip.974 ↗
2. 19.9%-efficient ZnO/CdS/CuInGaSe2 solar cell with 81.2% fill factor10.1002/pip.822 ↗
3. Solar cell efficiency tables (version 36)10.1002/pip.1021 ↗
4. Diode characteristics in state-of-the-art ZnO/CdS/Cu(In(1−x)Gax)Se2 solar cells10.1002/pip.626 ↗
5. L.L. Kazmerski, in: Technical Digest of 12th Photovoltaic Science and Engineering Conference, Cheju, South Korea, 2001, pp. 11.
6. H.W. Schock, F. Pfisterer, in: Proceedings of 16th European Photovoltaic Solar Energy Conference, Glasgow, UK, 2000, pp. 269.
7. Inducing and monitoring photoelectrochemical reactions at surfaces and buried interfaces in Cu(In,Ga)(S,Se)2 thin film solar cells10.1063/1.1906309 ↗
8. Electronic properties of Cu(In,Ga)Se2 heterojunction solar cells-recent achievements, current understanding, and future challenges10.1007/s003390050984 ↗
9. Observaton of intermixing at the buried CdS/Cu(In,Ga)Se2 thin film solar cell heterojunction10.1063/1.123578 ↗
10. Chemical properties of the Cu(In,Ga)Se2/MO/glass interfaces in thin film solar cells10.1016/j.tsf.2006.12.109 ↗
11. Extended soft X-ray emission spectroscopy: quantitative assessment of emission intensities10.1107/S0909049510031444 ↗
12. CuGaSe2 solar cells with 9.7% power conversion efficiency
13. Improved performance in ZnO/CdS/CuGaSe2 thin-film solar cells10.1002/pip.516 ↗
14. X-ray interactionsphotoabsorption, scattering, transmission, and reflection at E=50–30,000eV, Z=1–9210.1006/adnd.1993.1013 ↗
15. Attenuation lengths for X-rays, 〈http://wwwcxro.lbl.gov/optical_constants/atten2.html〉.
16. Calculations of Electron Inelastic Mean Free Paths.5. Data for 14 Organic-Compounds over the 50-2000eV Range10.1002/sia.740210302 ↗
17. CuGaSe2 thin films prepared by a novel CCSVT technique for photovoltaic application10.1016/j.tsf.2003.10.089 ↗
18. CuGaSe2–CuGa3Se5 phase transition in CCSVT-grown thin films10.1016/j.tsf.2005.11.067 ↗
19. Chemical structures of the Cu(In,Ga)Se2/Mo and Cu(In,Ga)(S,Se)2/Mo interfaces10.1103/PhysRevB.78.075404 ↗
20. Lift-off process and rear-side characterization of CuGaSe2 chalcopyrite thin films and solar cells10.1063/1.1891274 ↗
21. Formation of secondary phases in evaporated CuInS2 thin-films—a surface analytical study10.1116/1.579631 ↗
22. D. Schmid, J. Kessler, H.W. Schock, in: Proceedings of the 12th European Photovoltaic Solar Energy Conference, Amsterdam, Netherlands, 1994, pp. 653.
23. Structural peculiarities of CCSVT grown CuGaSe2 thin films10.1016/j.tsf.2004.11.091 ↗
24. The chemical and electronic surface and interface structure of CuGaSe2 thin-film solar cell absorbers
25. Surface and bulk properties of CuGaSe2 thin films10.1016/S0022-3697(03)00075-1 ↗
26. Chalcopyrite defect chalcopyrite heterojunctions on the basis of CuInSe210.1063/1.353020 ↗
27. R. Tertian, F. Claisse, Principles of Quantitative X-ray Fluorescence Analysis, Heyden Publishing, Philadelphia, USA, 1982, p. 51.
28. Controlled variation of the information depth by angle dependent soft X-ray emission spectroscopy: a study on polycrystalline Cu(In,Ga)Se210.1016/j.apsusc.2008.07.177 ↗
29. Surface Cu-depletion of Cu(In,Ga)Se2 thin films: further experimental evidence for a defect-induced surface reconstruction10.1063/1.3427539 ↗
30. New Cd-free buffer layer deposited by PVD: In2S3 containing Na compounds10.1016/S0040-6090(03)00216-5 ↗
31. High-efficiency copper indium gallium diselenide (CIGS) solar cells with indium sulfide buffer layers deposited by atomic layer chemical vapor deposition (ALCVD)10.1002/pip.508 ↗
32. D. Hariskos, R. Menner, S. Spiering, A. Eicke, M. Powalla, K. Ellmer, M. Oertel, B. Dimmler, in: Proceedings of the 19th European Photovoltaic Solar Energy Conference, WIP, Munich, Paris, France, 2004, pp. 1894.
33. N. Naghavi, J.-F. Guillemoles, D. Lincot, B. Canava, A. Etcheberry, S. Taunier, S. Spiering, M. Powalla, M. Lamirand, L. Legras, in: Proceedings of the 19th European Photovoltaic Solar Energy Conference, WIP, Munich, Paris, France, 2004, pp. 1733.
34. Large-area Cd-free CIGS solar modules with In2S3 buffer layer deposited by ALCVD10.1016/j.tsf.2003.10.090 ↗
35. Study on ALD In2S3/Cu(In,Ga)Se2 interface formation10.1002/pip.595 ↗
36. Microstructural and chemical studies of interfaces between Cu(In,Ga)Se2 and In2S3 layers10.1063/1.1863454 ↗
37. Material analysis of PVD-grown indium sulphide buffer layers for Cu(In,Ga)Se2-based solar cells10.1016/j.tsf.2004.11.017 ↗
38. Cu in In2S3: interdiffusion phenomena analysed by high kinetic energy X-ray photoelectron spectroscopy10.1002/pssa.200881162 ↗
39. Nondestructive depth-resolved spectroscopic investigation of the heavily intermixed In2S3/Cu(In,Ga)Se2 interface10.1063/1.3425739 ↗
40. Spray-ILGAR indium sulfide buffers for Cu(In,Ga)(S,Se)2 solar cells10.1002/pip.655 ↗
41. The dry and damp heat stability of chalcopyrite solar cells prepared with an indium sulfide buffer deposited by the spray-ILGAR technique10.1016/j.tsf.2005.11.096 ↗
42. Deposition of In2S3 on Cu(In,Ga)(S,Se)2 thin film solar cell absorbers by spray ion layer gas reaction: evidence of strong interfacial diffusion10.1063/1.2717534 ↗
43. A study of bulk NaxCu1−xIn5S8 and its impact on the Cu(In,Ga)Se2/ln2S3 interface of solar cells10.1016/j.solmat.2005.11.008 ↗
44. 18% efficiency Cd-free Cu(In,Ga)Se2 thin-film solar cells fabricated using chemical bath deposition (CBD)-ZnS buffer layers10.1143/JJAP.41.L165 ↗
45. Chemical bath process for highly efficient Cd-free chalcopyrite thin-film-based solar cells10.1139/cjp-77-9-723 ↗
46. High-efficiency Cd-free CIGSS thin-film solar cells with solution grown zinc compound buffer layers10.1016/S0927-0248(00)00260-9 ↗
47. Highly efficient Cu(Ga,In)(S,Se)2 thin film solar cells with zinc-compound buffer layers10.1016/S0040-6090(03)00155-X ↗
48. M.A. Contreras, T. Nakada, M. Hongo, A.O. Pudov, J.R. Sites, ZnO/ZnS(O,OH)/Cu(In,Ga)Se2 Mo solar cell with 18.6% efficiency, in: K. Kurokawa, L.L. Kazmerski, B. McNelis, M. Yamaguchi, C. Wronski, W.C. Sinke (Eds.) Proceedings of the Third World Conference on Photovoltaic Energy Conversion, vols a–c, 2003, pp. 570–573.
49. 18.5% copper indium gallium diselenide (CIGS) device using single-layer, chemical-bath-deposited ZnS(O,OH)10.1143/JJAP.43.L1475 ↗
50. Yield issues on the fabrication of 30cm×30cm-sized Cu(In,Ga)Se2-based thin-film modules10.1016/S0927-0248(02)00144-7 ↗
51. S. Neve, W. Bohne, J. Klaer, R. Klenk, R. Scheer, in: Proceedings of 17th European Photovoltaic Solar Energy Conference, Munich, Germany, 2001, pp. 1102.
52. Recombination mechanisms in highly efficient thin film Zn(S,O)/Cu(In,Ga)S2 based solar cells10.1063/1.3266829 ↗
53. Formation of a ZnS/Zn(S,O) bilayer buffer on CuInS2 thin film solar cell absorbers by chemical bath deposition10.1063/1.2202694 ↗
54. Auger parameter measurements of zinc-compounds relevant to zinc transport in the environment10.1002/sia.740140115 ↗
55. NIST, NIST X-Ray Photoelectron Spectroscopy Database, NIST Standard Reference Database 20, Version 3.4, Internet: 〈http://srdata.nist.gov/xps/〉.
56. Wagner · 1979
57. Intermixing at the heterointerface between ZnS/Zn(S,O) bilayer buffer and CuInS2 thin film solar cell absorber10.1063/1.2345034 ↗
58. Highly-efficient Cd-free CuInS2 thin-film solar cells and mint-modules with Zn(S,O) buffer layers prepared by an alternative chemical bath process10.1002/pip.682 ↗
59. The electronic structure of the [Zn(S,O)/ZnS]/CuInS2 heterointerface—impact of post-annealing10.1016/j.cplett.2006.11.022 ↗
60. Cd doping at the CuInSe2/CdS heterojunction10.1063/1.1570500 ↗
61. Atomic subshell photoionization cross sections and asymmetry parameters: 1<Z<10310.1016/0092-640X(85)90016-6 ↗
62. Cu-accumulation at the interface between sputter-(Zn,Mg)O and Cu(In,Ga)(S,Se)2—a key to understanding the need for buffer layers?10.1016/j.tsf.2006.12.172 ↗
63. QUASES-IMFP-TPP2MTM Software Package –Ver.2.1, Inelastic electron mean free path calculated from the Tanuma, Powell, and Penn TPP2M formula in S. Tanuma, C. J. Powell, D. R. Penn
64. W. Calvet, Präparation und in-situ Charakterisierung MBE-gewachsener Kupferindiumdisulfid-Schichten, Doctoral Thesis, Brandenburgische Technische Universität Cottbus, Cottbus, Germany 2002.
65. Characterisation of CuInSe2 thin films by XPS10.1002/sia.740150705 ↗
66. C. Loreck, I. Lauermann, A. Grimm, R. Klenk, M. Bär, S. Lehmann, S. Sokoll, M.C. Lux-Steiner, L. Weinhardt, C. Heske, S. Visbeck, T.P. Niesen, C. Jung, C.-H. Fischer, Interface chemistry between the sputter-(Zn,Mg)O buffer and the Cu(In,Ga)(S,Se)2 absorber, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, Dresden, Germany, 2006, pp. 1874.
67. R.C. Weast, Handbook of Chemistry and Physics, CRC Press, Inc. Boca Raton, Florida, 1986, p. B-104–B-105.
68. R.C. Weast, Handbook of Chemistry and Physics, CRC Press, Inc., Boca Raton, Florida, 1986, B-145.
69. Chemical structure of the (Zn1−xMgx)O/Culn(S,Se)2 interface in thin film solar cells10.1063/1.3230071 ↗
70. The problem of light-induced oxygen production at catalyst-loaded Cds suspensions10.1016/0022-0728(87)80095-5 ↗
71. Photocorrosion of cadmium sulfide: analysis by photoelectron spectroscopy10.1016/0169-4332(87)90152-8 ↗
72. Photochemistry of colloidal semiconductors 31. preparation and photolysis of CdS sols in organic-solvents10.1021/j100351a049 ↗
73. K. Ramanathan, R.N. Bhattacharya, J. Granata, J. Webb, D. Niles, M.A. Contreras, H. Wiesner, F.S. Hasoon, in: Proceedings of the 26th IEEE Photovoltaic Specialists Conference, 1997, pp. 319.
74. Replacement of the CBD-CdS buffer and the sputtered i-ZnO layer by an ILGAR-ZnO WEL: optimization of the WEL deposition10.1016/S0927-0248(02)00112-5 ↗
75. Valence band-structure of CuInS2 by soft-X-ray spectroscopy10.1016/0038-1098(92)90535-H ↗
76. X-ray spectral study of role of sulfur and chlorine 3d-orbitals in chemical bond
77. X-ray emission spectroscopy of Cu(In,Ga)(S,Se)2-based thin film solar cells: electronic structure, surface oxidation, and buried interfaces10.1002/1521-396X(200109)187:1<13::AID-PSSA13>3.0.CO;2-D ↗
78. Zn(O,OH) layers in chalcopyrite thin-film solar cells: valence-band maximum versus composition10.1063/1.2034650 ↗
79. Impact of Cd2+ -treatment on the band alignment at the ILGAR-ZnO/CuIn(S,Se)2 heterojunction10.1016/S0040-6090(03)00270-0 ↗
80. Interface engineering in chalcopyrite thin film solar devices10.1016/j.solmat.2005.10.012 ↗
81. Influence of damp heat on the optical and electrical properties of Al-doped zinc oxide10.1016/j.tsf.2008.10.107 ↗
82. In situ investigation of wet chemical processes for chalcopyrite solar cells by L-edge XAS under ambient conditions10.1016/j.nimb.2009.07.018 ↗
83. In situ analysis of the Zn(S,O) buffer layer preparation for chalcopyrite solar cells by Zn L-edge X-ray absorption spectroscopy10.1002/cphc.200800788 ↗
84. The high kinetic energy photoelectron spectroscopy facility at BESSY progress and first results10.1016/j.nima.2008.12.244 ↗
85. Surface Cu depletion of Cu(In,Ga)Se2 films: an investigation by hard X-ray photoelectron spectroscopy10.1016/j.actamat.2009.04.029 ↗
86. SAXES, a high resolution spectrometer for resonant X-ray emission in the 400–1600eV energy range10.1063/1.2372731 ↗
87. High-resolution, high-transmission soft X-ray spectrometer for the study of biological samples10.1063/1.3133704 ↗