journal article·2022-07

On the thermal stability and performance evaluation of Si doped transition metal nitride/oxide nanolayered multilayer-based spectrally selective absorber for high-temperature photothermal applications

Harish C. Barshilia, K. Niranjan, G. Srinivas, Siju John, N.T. Manikandanath

Publisher page

Abstract

Developing an absorber coating with high absorptance (α) in the solar spectrum region and low thermal emittance ( ε ) in the infrared region for concentrated solar power (CSP) applications, operating at temperatures >400 °C, is still a great challenge. Herein, we describe a multilayer solar selective coating on stainless steel 304 (SS 304) substrates with α of 0.954 and ε of 0.07. The multilayer solar selective coating consists of: (1) tungsten (W) infrared reflector layer, (2) titanium aluminum nitride (TiAlN) absorber layer, (3) titanium aluminum silicon nitride (TiAlSiN) absorber layer, (4) titanium aluminum silicon oxy-nitride (TiAlSiON) semi-absorber layer and (5) titanium aluminum silicon oxide (TiAlSiO) anti-reflection layer. The compositions of the individual layers have been selected in such a way that they easily form protective layers of Al 2O 3, TiO 2 and SiO 2 on the coating surface when exposed to high temperature in air. Further, addition of Si in different layers not only improves the thermal stability but also helps in densifying the microstructure of the layers. Moreover, the presence of multilayer structure hinders the formation of pinholes and pores along with columnar microstructure, a typical characteristic of the sputter deposited transition metal nitrides and oxides. This unique coating design, thus, leads to high spectral selectivity (α/ ε ) of 13.6 on SS 304 substrate along with thermal stability up to 600 °C for 1000 h in vacuum under cyclic heating conditions. These properties of the developed solar absorber coating demonstrate its suitability for evacuated receiver tubes in CSP plants.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high- temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
2. Fabrication and optimization of highly efficient cermet-based spectrally selective coatings for high operating temperature10.1016/j.tsf.2009.03.191 ↗
3. Characterization of CVD-tungsten–alumina cermets for high-temperature selective absorbers10.1016/S0927-0248(97)00219-5 ↗
4. Stability of W-Al2O3 cermet based solar coating for receiver tube operating at high temperature10.1016/j.solmat.2010.04.080 ↗
5. Microstructure and spectral selectivity of Mo-Al2O3 solar selective absorbing coatings after annealing10.1016/j.tsf.2007.07.193 ↗
6. Preparation and thermal stability on non-vacuum high temperature solar selective absorbing coatings10.1007/s11434-009-0159-6 ↗
7. Solar selective absorbing coatings based on AlSiN/AlSiON/AlSiOy layers10.1016/j.apsusc.2015.07.193 ↗
8. Characterization of TiAlSiN/TiAlSiON/SiO2 optical stack designed by modelling calculations for solar selective applications10.1016/j.solmat.2012.06.011 ↗
9. Multilayer solar selective absorber coatings based on W/WSiAlNx/WSiAlOyNx/SiAlOx for high temperature applications10.1016/j.solmat.2018.07.001 ↗
10. High-temperature air-stable solar absorbing coatings based on the cermet of MoSi2 embedded in SiO210.1016/j.solmat.2019.109946 ↗
11. TiAlN/TiAlON/Si3N4 tandem absorber for high temperature solar selective applications10.1063/1.2387897 ↗
12. Growth, characterization and performance evaluation of Ti/AlTiN/AlTiON/AlTiO high temperature spectrally selective coatings for solar thermal power applications10.1016/j.solmat.2014.07.037 ↗
13. Optical characterization of TiAlNx/TiAlNy/Al2O3 tandem solar selective absorber coatings10.1016/j.solmat.2017.06.007 ↗
14. Design of high-temperature solar-selective coatings based on aluminium titanium oxynitrides AlyTi1−y(OxN1−x). Part 1: advanced microstructural characterization and optical simulation10.1016/j.solmat.2017.10.015 ↗
15. Optimization design of Ti0.5Al0.5N/Ti0.25Al0.75N/AlN coating used for solar selective applications10.1016/j.solmat.2011.01.006 ↗
16. Transition metal nitride/oxide-based multilayer PVD coating with sol-gel derived ormosil passivation layer as a spectrally selective solar absorber for high-temperature photothermal applications10.1016/j.solmat.2022.111746 ↗
17. Influence of the receiver's back surface radiative characteristics on the performance of a heat-pipe evacuated-tube solar collector10.1016/j.apenergy.2013.11.051 ↗
18. Control of thermal emittance of stainless steel using sputtered tungsten thin films for solar thermal power applications10.1016/j.solmat.2014.11.002 ↗
19. Microstructure and mechanical properties of nanocomposite (Ti,Si,Al)N coatings10.1016/S0040-6090(01)01348-7 ↗
20. Barshilia · 2016
21. Low cost selective absorber based on a Fe-Al2O3 cermet film10.1016/0165-1633(87)90015-3 ↗
22. Yuste · 2011
23. A review on thermal stability and high temperature induced ageing mechanisms of solar absorber coatings10.1016/j.rser.2016.09.083 ↗
24. Structure and optical properties of pulsed sputter deposited CrxOy-Cr-Cr2O3 solar selective coatings10.1063/1.2831364 ↗
25. Qualification test procedure for solar absorber surface durability10.1016/S0927-0248(99)00111-7 ↗
26. Raman spectroscopy studies on the thermal stability of TiN, CrN, TiAlN coatings and nanolayered TiN/CrN, TiAlN/CrN multilayer coatings10.1557/JMR.2004.0444 ↗
27. Crystallographically oriented mesoporous WO3 films: synthesis, characterization and applications10.1021/ja011315x ↗
28. Evaluation of the material properties of the multilayered oxides formed on HCM12A using new and novel techniques10.1007/s11085-015-9551-6 ↗
29. Thin film of aluminum oxide through pulsed laser deposition: a micro-Raman study10.1016/S0921-5107(00)00554-7 ↗
30. Highlighting the impact of shear strain on the SiO2 glass structure: from experiments to atomistic simulations10.1016/j.jnoncrysol.2020.119898 ↗
31. Structural study of sol–gel silicate glasses by IR and Raman spectroscopies10.1016/j.jnoncrysol.2009.01.010 ↗
32. Effect of annealing temperature on structural, morphological and optical properties of nanocrystalline TiO2 thin films synthesized by sol–gel dip coating method10.1016/j.matpr.2019.06.651 ↗
33. Raman scattering and lattice defects in nanocrystalline CeO2 thin films10.1016/S0167-2738(02)00104-2 ↗
34. Recommended qualification test procedure for solar absorber surface durability
35. NiCr–MgF2 spectrally selective solar absorber with ultra-high solar absorptance and low thermal emittance10.1016/j.solmat.2019.110219 ↗
36. 1982
37. Titanium aluminum nitride films: a new alternative to TiN coatings10.1116/1.573713 ↗
38. AlCrN PVD coatings for machining of austenitic stainless steel10.1016/j.surfcoat.2005.10.030 ↗
39. Single layer and multilayer wear resistant coatings of (Ti,Al)N: a review10.1016/S0921-5093(02)00259-9 ↗