Droplet effect on the infrared transmittance of radiative cooler for direct water condensation
Source abstract
Abstract
Accessibility to freshwater has become a global issue and many approaches have been developed to tackle this question. One promising way is using radiative coolers to condense dew from the air. This study aims to quantify systematically the effects of droplet diameters, spacial distribution, projected surface coverage ratio, and surface wettabilities on the normal-hemispherical transmittance and cooling performance. The Monte Carlo ray tracing method is employed to simulate the infrared light transfer through the droplets. For the first time, the normal-hemispherical transmittance and cooling performance of radiative cooler with different droplet contact angles were investigated theoretically. The weighted transmittance is found to be independent of droplet spacial distribution, but dependent on droplet (i)diameter, (ii)projected surface coverage ratio, and (iii)contact angle. Results show that the water condensed on the emitting surface can improve the cooling power. A super-hydrophilic PDMS film with a 90% projected surface coverage ratio can reach a cooling power of 109.3 W m −2 . In the process of water condensation, a cooling power loss of up to 23.4 W m −2 will appear due to surface wettability, so super-hydrophilic surfaces are preferred. These results provide guidance on surface wettability preference for better performance of radiative cooler for direct water condensation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · Urban Heat Island Mitigation · Building Energy and Comfort Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Gleick · 1993 · 473
2. Worldwide contamination of water by fluoride10.1007/s10311-016-0563-5 ↗
3. Research progress of novel adsorption processes in water purification: A review10.1016/S1001-0742(08)60001-7 ↗
4. Advances in seawater desalination technologies10.1016/j.desal.2007.01.067 ↗
5. A review: Dew water collection from radiative passive collectors to recent developments of active collectors10.1007/s40899-015-0038-z ↗
6. Irrigation of plants with atmospheric water within the desert10.1038/2071173a0 ↗
7. Effect of atmospheric humidity on radiation cooling10.1016/0038-092X(81)90209-7 ↗
8. Use of condensed water vapour from the atmosphere for irrigation in Bahrain10.1016/S0306-2619(99)00054-9 ↗
9. Effect of atmospheric water vapor on radiative cooling performance of different surfaces10.1016/j.solener.2019.03.011 ↗
10. Dew water collector for potable water in Ajaccio (Corsica Island, France)10.1016/S0169-8095(02)00100-X ↗
11. Dew and rain water collection in the Dalmatian Coast, Croatia10.1016/j.atmosres.2009.01.004 ↗
12. Rooftop dew, fog and rain collection in southwest Morocco and predictive dew modeling using neural networks10.1016/j.jhydrol.2012.04.004 ↗
13. Roof-integrated dew water harvesting in Combarbalá, Chile10.2166/aqua.2018.174 ↗
14. Radiative cooling during the day: Simulations and experiments on pigmented polyethylene cover foils10.1016/0927-0248(94)00200-2 ↗
15. Condensation of water by radiative cooling10.1016/0960-1481(94)90388-3 ↗
16. A polydimethylsiloxane-coated metal structure for all-day radiative cooling10.1038/s41893-019-0348-5 ↗
17. Passive directional sub-ambient daytime radiative cooling10.1038/s41467-018-07293-9 ↗
18. Multilayered SiO2/Si3N4 photonic emitter to achieve high-performance all-day radiative cooling10.1016/j.solmat.2020.110584 ↗
19. Radiative cooling to deep sub-freezing temperatures through a 24-h day–night cycle10.1038/ncomms13729 ↗
20. Passive radiative cooling below ambient air temperature under direct sunlight10.1038/nature13883 ↗
21. Scalable-manufactured randomized glass-polymer hybrid metamaterial for daytime radiative cooling10.1126/science.aai7899 ↗
22. Daytime radiative cooling using near-black infrared emitters10.1021/acsphotonics.6b00991 ↗
23. Comparative analysis of two polyethylene foil materials for dew harvesting in a semi-arid climate10.1016/j.jhydrol.2011.09.012 ↗
24. All-day freshwater harvesting through combined solar-driven interfacial desalination and passive radiative cooling10.1021/acsami.0c14773 ↗
25. Vapor condensation with daytime radiative cooling10.1073/pnas.2019292118 ↗
26. Hydrophilic radiative cooler for direct water condensation in humid weather10.1016/j.solmat.2020.110700 ↗
27. Water harvest via dewing10.1021/la3013987 ↗
28. Patterned polymer coatings increase the efficiency of dew harvesting10.1021/acsami.6b16248 ↗
29. Transmittance of transparent windows with non-absorbing cap-shaped droplets condensed on their backside10.1016/j.jqsrt.2017.03.012 ↗
30. Transmittance of semitransparent windows with absorbing cap-shaped droplets condensed on their backside10.1016/j.jqsrt.2017.06.016 ↗
31. Light transfer through windows with external condensation10.1016/j.jqsrt.2018.01.019 ↗
32. Effective substrate emissivity during dew water condensation10.1016/j.ijheatmasstransfer.2021.122078 ↗
33. Ray tracing in absorbing media10.1016/j.jqsrt.2005.01.001 ↗
34. Superhydrophobic and recyclable cellulose-fiber-based composites for high-efficiency passive radiative cooling10.1021/acsami.1c04046 ↗
35. Ultrabroadband photonic structures to achieve high-performance daytime radiative cooling10.1021/nl4004283 ↗
36. Double-layer nanoparticle-based coatings for efficient terrestrial radiative cooling10.1016/j.solmat.2017.04.020 ↗
37. Spectrally selective inorganic-based multilayer emitter for daytime radiative cooling10.1021/acsami.9b16742 ↗
38. Infrared thermography for temperature measurement and non-destructive testing10.3390/s140712305 ↗