Evaluation of reflectance measurement techniques for artificially soiled solar reflectors: Experimental campaign and model assessment
Source abstract
Abstract
Abstract The soiling of heliostats is a highly detrimental process that affects the energy conversion efficiency of solar tower power plants as soiled heliostats suffer significant drops of reflectance. Tools that allow reliable soiling measurements and predictions are needed to accurately assess the induced power losses and to develop strategies that mitigate the related detrimental effects. The results of an experimental campaign conducted at the Fraunhofer ISE laboratories are presented and discussed in this paper. Four different techniques were used to measure the reflectance of artificially soiled mirrors: (i) measurements obtained with a portable specular reflectometer 15R-RGB (D&S), (ii) spectral analysis of the outcomes of a spectrophotometer, (iii) post-processing analysis of the measurements obtained with the device VLABS (very low angular beam spread), and (iv) microscope-captured image processing. A detailed comparison between the measurements obtained with each device is performed to evaluate the agreement among them and the motivations of slightly different trends in the results. Finally, the outcomes of the analyses are proved to give further strength to the validation of a previously developed solar reflectors soiling model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · Solar Thermal and Photovoltaic Systems · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Mehos · 2016
2. A comprehensive review of the impact of dust on the use of solar energy: history, investigations, results, literature, and mitigation approaches10.1016/j.rser.2012.12.065 ↗
3. Sectorial reflectance-based cleaning policy of heliostats for Solar Tower power plants10.1016/j.renene.2020.11.129 ↗
4. Optimization of cleaning strategies for heliostat fields in solar tower plants10.1016/j.solener.2020.04.032 ↗
5. Wavelength dependent scattering caused by dust accumulation on solar mirrors10.1016/0165-1633(80)90046-5 ↗
6. Pettit · 1982
7. The effect of natural soiling & cleaning on the size distribution of particles deposited on glass mirrors10.1115/1.3266188 ↗
8. Energy yield loss caused by dust deposition on photovoltaic panels10.1016/j.solener.2014.05.030 ↗
9. Comprehensive analysis of soiling and cementation processes on PV modules in Qatar10.1016/j.solmat.2018.06.051 ↗
10. Estimation of mean field reflectance in CST applications10.1016/j.solener.2020.08.073 ↗
11. Soiling of solar collectors - modelling approaches for airborne dust and its interactions with surfaces10.1016/j.rser.2017.06.043 ↗
12. Development and experimental validation of a physical model for the soiling of mirrors for CSP industry applications10.1016/j.solener.2018.08.066 ↗
13. In-situ reflectivity monitoring of heliostats using calibration cameras
14. A robotic vision system for inspection of soiling at CSP plants10.1063/5.0029493 ↗
15. Airborne soiling measurements of entire solar fields with QFLy10.1063/5.0028968 ↗
16. Dominant environmental parameters for dust deposition and resuspension in desert climates10.1080/02786826.2018.1462473 ↗
17. CSP performance and yield analysis including soiling measurements for Morocco and Portugal10.1016/j.renene.2020.10.014 ↗
18. Comparative modeling of optical soiling losses for CSP and PV energy systems10.1016/j.solener.2019.12.045 ↗
19. Influence of dust accumulation on the solar reflectivity of a linear Fresnel reflector
20. Soiling of solar mirrors- Impact of incidence angles on CSP plant performance10.1063/5.0029067 ↗
21. The effect of soiling on the reflectance of solar reflector materials - model for prediction of incidence angle dependent reflectance and attenuation due to dust deposition10.1016/j.solmat.2019.03.015 ↗
22. Scattering and specular reflection of solar reflector materials – measurements and method to determine solar weighted specular reflectance10.1016/j.solmat.2019.110191 ↗
23. Reflectometer comparison for assessment of back-silvered glass solar mirrors10.1016/j.solener.2017.06.053 ↗
24. Equipment and methods for measuring reflectance of concentrating solar reflector materials10.1016/j.solmat.2017.03.036 ↗
25. Tests of functional coatings on glass adapted to extreme - arid and maritime - climatic conditions for solar energy systems
26. Pritzkow
27. Angle resolved specular reflectance measured with VLABS
28. Microscopic measurement and analysis of the soiling behavior of surfaces with standardized and real dust - a parameter study10.1016/j.egypro.2016.06.239 ↗
29. Optimal condition-based cleaning of solar power collectors10.1016/j.solener.2017.08.076 ↗
30. The effect of incidence angle on the reflectance of solar mirrors10.1016/j.solmat.2017.11.029 ↗
31. Modelling the soiling of heliostats: assessment of the optical efficiency and impact of cleaning operations10.1063/1.5117555 ↗
32. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
33. ImageJ2: ImageJ for the next generation of scientific image data10.1186/s12859-017-1934-z ↗
34. Picture thresholding using an iterative selection method10.1109/TSMC.1978.4310039 ↗
35. Notes on the use of propagation of error formulas10.6028/jres.070C.025 ↗