journal article·2020-08

Experimental and numerical study on the reflectance losses of the porous volumetric solar receiver

Shen Du, Ming-Jia Li, Yan He, Zeng-Yao Li

Publisher page

Abstract

Abstract The reflectance losses are the predominate energy losses in solar radiation transfer process for the porous volumetric solar receiver. However, few studies pay attention to the influence of geometrical parameters of porous media on the reflectance losses, and the data of reflectance losses of porous volumetric solar receiver in solar spectrum is not complete. In this paper, both experimental and numerical simulation methods are applied to comprehensively investigate the reflectance losses of the porous volumetric solar receiver. A series of silicon carbide reticulated porous ceramics (SiC RPCs) is fabricated by replica method and recoating technique. The reflectance losses are measured based on UV-VIS-NIR spectrophotometer. Meanwhile, porous models with different geometrical parameters are artificially reconstructed. Monte Carlo Ray Tracing method is used to calculate the total reflectance. The results present that the SiC RPCs exhibit small reflectance losses in the solar spectrum with a peak at about 420 nm. The geometrical parameters, such as porosity and pore diameter do not change the spectral behavior but only influence the magnitude of the reflectance. Larger porosity and larger pore diameter are beneficial for reducing the reflectance losses. The correlation of the reflectance losses as functions of pore density and porosity has been developed. Furthermore, the influence of the incident angle of radiation on reflectance losses is studied. Relatively large increase is observed as the incident angle is larger than 30°. This phenomenon becomes more obvious for the porous media with larger porosity or larger pore diameter.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Radiative Heat Transfer Studies · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Applications of porous media combustion technology – a review10.1016/j.apenergy.2009.01.017 ↗
2. Sensitivity analysis of the numerical study on the thermal performance of a packed-bed molten salt thermocline thermal storage system10.1016/j.apenergy.2011.11.002 ↗
3. Review of the solar flux distribution in concentrated solar power: non-uniform features, challenges, and solutions10.1016/j.applthermaleng.2018.12.006 ↗
4. Optimization method for the porous volumetric solar receiver coupling genetic algorithm and heat transfer analysis10.1016/j.ijheatmasstransfer.2018.01.120 ↗
5. Experimental study of ceramic foams used as high temperature volumetric solar absorber10.1016/j.solener.2016.06.066 ↗
6. Pore scale numerical simulation of heat transfer and flow in porous volumetric solar receivers10.1016/j.applthermaleng.2017.03.141 ↗
7. Heat transfer analyses of porous media receiver with multi-dish collector by coupling MCRT and FVM method10.1016/j.solener.2013.04.004 ↗
8. Pore-scale numerical simulation of fully coupled heat transfer process in porous volumetric solar receiver10.1016/j.energy.2017.08.062 ↗
9. Absorption/scattering coefficients and scattering phase functions in reticulated porous ceramics10.1115/1.2824071 ↗
10. Thermal radiation in ultralight metal foams with open cells10.1016/j.ijheatmasstransfer.2004.03.006 ↗
11. Optical parameters for characterization of thermal radiation in ceramic sponges – experimental results and correlation10.1016/j.ijheatmasstransfer.2014.08.023 ↗
12. A simple expression for the normal spectral emittance of open-cell foams composed of optically thick and smooth struts10.1016/j.jqsrt.2016.12.011 ↗
13. Tomography-based Monte Carlo determination of radiative properties of reticulate porous ceramics10.1016/j.jqsrt.2006.11.002 ↗
14. Monte Carlo determination of radiative properties of metal foams: comparison between idealized and real cell structures10.1016/j.ijthermalsci.2014.08.006 ↗
15. Coupled heat transfer performance of a high temperature cup shaped porous absorber10.1016/j.enconman.2015.12.034 ↗
16. Coupled radiation and flow modeling in ceramic foam volumetric solar air receivers10.1016/j.solener.2011.06.030 ↗
17. Kretzschmar · 2012 · 21
18. Integrated analysis on the volumetric absorption characteristics and optical performance for a porous media receiver10.1016/j.enconman.2015.08.028 ↗
19. Qiu · 2017
20. Porous and dense hafnium and zirconium ultra-high temperature ceramics for solar receivers10.1016/j.optmat.2013.08.020 ↗
21. Numerical analysis of radiation attenuation in volumetric solar receivers composed of a stack of thin monolith layers10.1016/j.egypro.2014.10.199 ↗
22. Optical and radiative properties analysis and optimization study of the gradually-varied volumetric solar receiver10.1016/j.apenergy.2017.05.165 ↗
23. Improvement in the strut thickness of reticulated porous ceramics10.1111/j.1151-2916.2001.tb00895.x ↗
24. Influence of polymeric sponge pre-treatment on properties of reticulated porous ceramics
25. Low-temperature sintering of SiC reticulated porous ceramics with MgO–Al2O3–SiO2 additives as sintering aids10.1007/s10853-006-0473-1 ↗
26. Tomography-based determination of Nusselt number correlation for the porous volumetric solar receiver with different geometrical parameters10.1016/j.renene.2018.12.001 ↗
27. A MCRT and FVM coupled simulation method for energy conversion process in parabolic trough solar collector10.1016/j.renene.2010.07.017 ↗
28. Modest · 2013
29. Optical properties of alpha silicon carbide
30. Determination of the effective refractive index of porous silicon/polymer composite films
31. Representative elementary volumes required to characterize the normal spectral emittance of silicon carbide foams used as volumetric solar absorbers10.1016/j.ijheatmasstransfer.2015.09.069 ↗
32. Hendricks · 1993