Engineering interfacial modification on nanocrystalline hematite photoanodes: A close look into the efficiency parameters
Source abstract
Abstract
Abstract This work describes an approach to direct evaluate the role of selected modifier added over hematite photoanode interfaces for light assisted water splitting. Hematite photoanodes with thickness varying from 25 up to 130 nm were designed via spin coating deposition of polymeric precursor that provides mesoporous planar morphology. The photoelectrochemical data analyzed in terms of global efficiency parameter (ηglobal) revealed a close dependence with hematite thickness for unmodified photoanode, which large number of interfaces associated with high charge recombination rate led to drop the electrode performance. To address this issue and manipulate the large number of interfaces due to the planar morphology, Sn4+ ions (1 and 3% molar ratio) were deposited over the hematite surface leading to enhance the electronic transport with a cost of creation of surface states at the solid-liquid interface. Then, a second modification process was done by photoelectrodeposition of Ni/Fe based material to suppress or minimizing the effect of surface state created by the Sn4+ ions addition. The results show that the interfacial traps were mitigated for the thinner hematite photoanodes, where the presence of Sn4+ and Ni/Fe significantly increases the ηglobal. The present find, highlights the importance of morphology design that allows a combination of modifier insertion to work in synergy for enhancing the overall photoanode performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Iron oxide chemistry and applications · Mine drainage and remediation techniques · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Latest advances on the columnar nanostructure for solar water splitting
2. Holy grails of chemistry10.1021/ar00051a001 ↗
3. Electrochemical photolysis of water at a semiconductor electrode10.1038/238037a0 ↗
4. Solar energy supply and storage for the legacy and nonlegacy worlds10.1021/cr100246c ↗
5. Solar water splitting cells10.1021/cr1002326 ↗
6. Solar water splitting: progress using hematite (α‐Fe2O3) photoelectrodes10.1002/cssc.201000416 ↗
7. Surface Fe vacancy defects on haematite and their role in light-induced water splitting in artificial photosynthesis10.1039/C7CP06558B ↗
8. Probing the photoelectrochemical properties of hematite (α-Fe 2 O 3) electrodes using hydrogen peroxide as a hole scavenger10.1039/C0EE00570C ↗
9. Why tin‐doping enhances the efficiency of hematite photoanodes for water splitting—the full picture10.1002/adfm.201804472 ↗
10. Unraveling the role of Sn segregation in the electronic transport of polycrystalline hematite: raising the electronic conductivity by lowering the grain‐boundary blocking effect10.1002/aelm.201900065 ↗
11. Cathodic shift of onset potential for water oxidation on a Ti 4+ doped Fe 2 O 3 photoanode by suppressing the back reaction10.1039/C3EE42722F ↗
12. Photoelectrochemical performance of nanostructured Ti-and Sn-doped α-Fe2O3 photoanodes10.1021/cm1026078 ↗
13. Enhanced surface and bulk recombination kinetics by virtue of sequential metal and nonmetal incorporation in hematite-based photoanode for superior photoelectrochemical water oxidation10.1021/acsaem.9b00548 ↗
14. Dynamics of photogenerated holes in surface modified α-Fe2O3 photoanodes for solar water splitting10.1073/pnas.1118326109 ↗
15. Oxygen-Deficient NiFe2O4 spinel nanoparticles as an enhanced electrocatalyst for the oxygen evolution reaction10.1002/cnma.201900231 ↗
16. An optically transparent iron nickel oxide catalyst for solar water splitting10.1021/jacs.5b05544 ↗
17. A strongly coupled graphene and FeNi double hydroxide hybrid as an excellent electrocatalyst for the oxygen evolution reaction10.1002/anie.201402822 ↗
18. Tailoring hematite/FTO interfaces: new horizons for spin-coated hematite photoanodes targeting water splitting10.1016/j.matlet.2019.07.068 ↗
19. Nanostructured hematite thin films produced by spin-coating deposition solution: application in water splitting10.1016/j.solmat.2008.11.049 ↗
20. High temperature activation of hematite nanorods for sunlight driven water oxidation reaction10.1039/C7CP04827K ↗
21. Effect of thermal treatment on solid–solid interface of hematite thin film synthesized by spin-coating deposition solution10.1016/j.tsf.2016.03.011 ↗
22. Thermodynamics of native point defects in α-Fe 2 O 3: an ab initio study10.1039/c3cp53311e ↗
23. Iron-based photocatalytic and photoelectrocatalytic nano-structures: facts, perspectives, and expectations10.1016/j.apcatb.2018.12.014 ↗
24. The influence of the film thickness of nanostructured α-Fe 2 O 3 on water photooxidation10.1039/b811946e ↗
25. Sn-doped hematite nanostructures for photoelectrochemical water splitting10.1021/nl200708y ↗
26. Key strategies to advance the photoelectrochemical water splitting performance of α‐Fe2O3 photoanode10.1002/cctc.201801187 ↗
27. Thin-layer Fe2TiO5 on hematite for efficient solar water oxidation10.1021/acsnano.5b01028 ↗
28. Synergetic effect of Sn addition and oxygen-deficient atmosphere to fabricate active hematite photoelectrodes for light-induced water splitting10.1088/1361-6528/aa8b5d ↗
29. Photocatalytic water oxidation with hematite electrodes10.1039/c3cy00310h ↗
30. On the theoretical and experimental control of defect chemistry and electrical and photoelectrochemical properties of hematite nanostructures10.1021/acsami.8b16911 ↗
31. Probing the dynamics of photogenerated holes in doped hematite photoanodes for solar water splitting using transient absorption spectroscopy10.1039/C8CP00981C ↗
32. Ultrafast charge carrier recombination and trapping in hematite photoanodes under applied bias10.1021/ja504473e ↗