journal article·2020-03

Bistable mirror/transparent reversibly electrodeposited devices with TiO2 as the mediator

Jisu Han, Chihun Sung, Juhee Song, Chil-sung Ah, Joo Yeon Kim, Hojun Ryu, Chi-sun Hwang, Tae-Youb Kim

Publisher page

Abstract

Abstract Reversible electrodeposition (RED) devices exhibit both transparent and mirror states, allowing light penetration and reflection. Therefore, the incident light transmission regulates the radiant heat generation. However, the low bistability of these devices is the main limitation to their application in windows since it causes continue energy consumption to maintain the mirror state; this is mainly due to the presence of Cu ions in the electrolyte, which is the main dissolution agent of the deposited Ag metal. Thus, we used a three-layered TiO2 counter electrode as an electrochemical reaction mediator and eliminated the Cu ions. In addition, the Ag thin film pre-deposited on the working electrode effectively enhanced the bistability. The combination of three-layered TiO2 and the pre-deposited Ag film allowed a reflectance of 78% and enhanced the mirror-state maintenance of the mirror state. After switching off the voltage, the retained reflectance was 17% at three-layered TiO2 more than twice larger than that at one-layered TiO2 (7%). The bistability and reflectance increase in the proposed RED devices with respect to those based on a Cu-containing electrolyte.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Perovskite Materials and Applications · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. On the impact of urban overheating and extreme climatic conditions on housing energy comfort and environmental quality of vulnerable population in europe10.1016/j.enbuild.2014.08.050 ↗
2. Global temperature change10.1073/pnas.0606291103 ↗
3. Silver nanowire transparent electrodes for liquid crystal-based smart windows10.1016/j.solmat.2014.09.006 ↗
4. Measured overall heat transfer coefficient of a suspended particle device switchable glazing10.1016/j.apenergy.2015.09.019 ↗
5. Electrochromic windows: an overview10.1016/S0013-4686(99)00034-1 ↗
6. Electrochromic materials and devices for energy efficient windows10.1016/0165-1633(84)90024-8 ↗
7. Magnesium–titanium alloy switchable mirrors10.1016/j.solmat.2007.02.024 ↗
8. Optical switches based on magnesium lanthanide alloy hydrides10.1063/1.119169 ↗
9. Electrochromism of Mg-Ni hydride switchable mirrors10.1117/12.448240 ↗
10. Switchable mirrors based on nickel–magnesium films10.1063/1.1371959 ↗
11. Switchable silver mirrors with long memory effects10.1039/C4SC01912A ↗
12. Electrodeposition-based electrochromic devices with reversible three-state optical transformation by using titanium dioxide nanoparticle modified FTO electrode10.1039/C6RA03315F ↗
13. Electrochromic device for the reversible electrodeposition system10.1080/15980316.2014.882280 ↗
14. Electrochemical optical‐modulation device with reversible transformation between transparent, mirror, and black
15. Enhanced black state induced by spatial silver nanoparticles in an electrochromic device10.1038/am.2017.25 ↗
16. New switchable mirror device with a counter electrode based on reversible electrodeposition10.1016/j.solmat.2017.11.007 ↗
17. Improvement of color retention properties of Ag deposition-based electrochromic device by introducing anion exchange membrane10.1557/mrc.2018.55 ↗
18. An all-solid-state electrochromic device based on NiO/WO3 complementary structure and solid hybrid polyelectrolyte10.1016/j.solmat.2009.06.025 ↗
19. Influence of water on the electrochemical properties of (CeO2) x (TiO2) 1− x and WO3 sol–gel coatings and electrochromic devices10.1016/j.ssi.2003.08.031 ↗
20. Comparison of electrochromic amorphous and crystalline tungsten oxide films10.1016/S0927-0248(03)00019-9 ↗
21. Structural and optical properties of WO3 electrochromic layers prepared by the sol-gel method
22. Facile single-step fabrications of electrochromic WO3micro-patterned films using the novel photosensitive sol–gel method10.1016/j.ceramint.2014.08.084 ↗
23. Electrochromic materials for optical switching devices10.1002/adma.19900020103 ↗
24. Transparent TiO2 nanotube electrodes via thin layer anodization: fabrication and use in electrochromic devices10.1021/la9004399 ↗
25. The performance of an all-solid-state electrochromic display consisting of WO3 and TiO2 films with polyethylene oxide gel electrolyte10.1143/JJAP.38.770 ↗
26. Degradation mechanisms in electrochromic devices based on sol-gel deposited thin films10.1016/0927-0248(95)00047-X ↗
27. Dip-coated TiO2-CeO2 films as transparent counter-electrode for transmissive electrochromic devices10.1016/0022-3093(90)90151-B ↗
28. Electrochemical insertion in sol-gel made CeO2-TiO2 from lithium conducting polymer electrolyte: relation with the material structure, Solar Energy Mater10.1016/0927-0248(94)00190-1 ↗
29. The CeO2–TiO2–ZrO2 sol–gel film: a counter-electrode for electrochromic devices10.1016/j.tsf.2004.04.039 ↗
30. The influence of charge capacity ratio on the performance of a complementary electrochromic system, Solar Energy Mater10.1016/S0927-0248(98)00137-8 ↗
31. Cycling and at-rest stabilities of a complementary electrochromic device based on tungsten oxide and Prussian blue thin films10.1016/S0013-4686(99)00041-9 ↗
32. Influence of charge capacity ratio on the optical attenuation of a tungsten oxide-polyaniline electrochromic device
33. Theoretical study of lithium intercalation in rutile and anatase10.1103/PhysRevB.53.159 ↗
34. Li+ ion insertion in TiO2 (anatase). 1. Chronoamperometry on CVD films and nanoporous films10.1021/jp970489r ↗
35. Li+ ion insertion in TiO2 (anatase). 2. Voltammetry on nanoporous films10.1021/jp970490q ↗
36. Lithium insertion in nanostructured TiO2 (B) architectures10.1021/ar300176y ↗
37. Defect chemistry of lithium storage in TiO2 as a function of oxygen stoichiometry10.1016/j.ssi.2011.12.003 ↗
38. Defect chemistry, surface structures, and lithium insertion in anatase TiO210.1021/jp057261l ↗
39. Solar spectral optical properties of pigments—Part I: model for deriving scattering and absorption coefficients from transmittance and reflectance measurements10.1016/j.solmat.2004.11.012 ↗
40. Light-transmittance predictions under multiple-light-scattering conditions. II. Inverse problem,: particle size determination10.1364/AO.40.001525 ↗
41. Quantitative analysis of light-harvesting efficiency and electron-transfer yield in ruthenium-dye-sensitized nanocrystalline TiO2 solar cells10.1021/cm011563s ↗
42. Dye-sensitized solar cells based on anatase TiO2 nanoparticle/nanowire composites10.1021/jp063972n ↗
43. High‐efficiency organic‐dye‐sensitized solar cells controlled by nanocrystalline‐TiO2 electrode thickness10.1002/adma.200502540 ↗
44. Reversible electrochemical silver deposition over large areas for smart windows and information display10.1016/j.electacta.2017.09.088 ↗
45. Physicochemical properties of small metal particles in solution: microelectrode reactions, chemisorption, composite metal particles, and the atom-to-metal transition10.1021/j100123a004 ↗
46. Effects of halides on plasmid-mediated silver resistance in Escherichia coli10.1128/AEM.64.12.5042-5045.1998 ↗
47. Aggregation kinetics and dissolution of coated silver nanoparticles10.1021/la202328n ↗
48. Effect of chloride on the dissolution rate of silver nanoparticles and toxicity to E. coli10.1021/es400396f ↗
49. Dynamic windows with neutral color, high contrast, and excellent durability using reversible metal electrodeposition10.1016/j.joule.2017.06.001 ↗
50. Bi-based electrochromic cell with mediator for white/black imaging10.1016/j.solmat.2009.05.001 ↗
51. Status of reversible electrodeposition electrochromic devices10.1016/S0927-0248(98)00192-5 ↗