Gel electrolytes for partly covered photoelectrochromic devices
Source abstract
Abstract
This work comprises a systematic experimental investigation of the effect of gel electrolytes in the properties of partly covered photoelectrochromic devices. A series of gel electrolytes was fabricated with different concentrations of poly(methyl methacrylate), PMMA, (Mw 120.000), ranging from 0% w/w to 45% w/w, dissolved in acetonitrile with 0.5 M lithium iodide, 0.005 M iodine and 0.5 M 4- tert -butylpyridine. The ionic conductivity of the electrolytes was in the order of 10 −5 S/cm, decreasing with increasing PMMA concentration. These electrolytes were incorporated in partly covered photoelectrochromic devices. It was found that with increasing PMMA concentration, the power conversion efficiency of the incorporated solar cells decreases (from 1.7% to 0.5%), mostly due to the reduction of the short-circuit current. Regarding coloration kinetics, the photocoloration efficiency, PhCE of the devices was nearly constant up to 35% w/w concentration of PMMA, decreasing with further increase in the PMMA concentration. Of the electrolytes tested, that with 35% w/w concentration of PMMA was favored as it leads to devices with satisfactory electrical and optical characteristics. The long-term stability of devices with the aforementioned electrolyte was tested. A gradual decrease of the coloration depth with storage time was observed, due to losses at the WO 3 /electrolyte interface. A 35 nm thin ZnS barrier on top of WO 3 suppressed these losses, leading to a stabilized contrast ratio of 2.1:1, 137 days post fabrication. Devices exposed to insolation in open-circuit and in short-circuit conditions remained operational for more than 200 days, without the stability problems related to liquid electrolytes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · TiO2 Photocatalysis and Solar Cells · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Development of photoelectrochromic devices for dynamic solar control in buildings10.1016/j.solmat.2010.07.030 ↗
2. Forthcoming perspectives of photoelectrochromic devices: a critical review10.1039/C6EE01514J ↗
3. Dye-sensitized solar cells10.1021/cr900356p ↗
4. Organic dye-sensitized solar cells containingalkaline iodide-based gel polymer electrolytes: influence of cation size10.1039/C7CP07544H ↗
5. High efficient dye sensitized solar cells using phthaloylchitosan based gel polymer electrolytes10.1016/j.electacta.2017.06.011 ↗
6. The applications of polymers in solar cells: a review10.3390/polym11010143 ↗
7. Photovoltaic performance of dye-sensitized solar cell assembled with gel polymer electrolyte10.1016/j.jpowsour.2005.01.058 ↗
8. Recent research progress on polymer electrolytes for dye-sensitized solar cells10.1016/j.solmat.2009.01.009 ↗
9. Review on dye-sensitized solar cells based on polymer electrolytes
10. Improvement in long-term stability of dye-sensitized solar cell for outdoor use10.1016/j.solmat.2010.04.019 ↗
11. Quasi-solid organic electrolytes gelatinized with polymethyl-methacrylate and their applications for lithium batteries
12. Gel electrolyte for solid-state Electrochromic cell10.1149/1.2069512 ↗
13. Electrochromic devices employing methacrylate-based polymer electrolytes10.1016/j.solmat.2008.10.010 ↗
14. A pragmatic approach to methylmethacrylate based solid polymer electrolyte processing:A case study for electrochromism10.1016/j.solmat.2015.03.022 ↗
15. Review on gel polymer electrolytes for lithium batteries10.1016/j.eurpolymj.2005.09.017 ↗
16. Chemical sensors10.1021/a1980010w ↗
17. [PEI–SiO2]:[LiTFSI] nanocomposite polymer electrolytes: ion conduction and optical properties10.1016/j.solmat.2011.11.021 ↗
18. Ion conduction mechanism of nanocomposite polymer electrolytes comprised of polyethyleneimine–lithium bis(trifluoromethylsulfonyl)imide and silica10.1016/j.electacta.2013.12.032 ↗
19. Photoelectrochromic performance of tungsten oxide based devices with PEG–titanium complex as solvent-free electrolytes10.1016/j.solmat.2011.05.004 ↗
20. Perovskite photovoltachromic cells for building integration10.1039/C5EE00896D ↗
21. Tunable photovoltaic electrochromic device and module10.1016/j.solmat.2012.07.021 ↗
22. A vertically integrated solar‐powered electrochromic window for energy efficient buildings10.1002/adma.201401400 ↗
23. Flexible solid‐state photoelectrochromic windows”10.1149/1.1392635 ↗
24. Manufacture and demonstration of organic photovoltaic‐powered electrochromic displays using roll coating methods and printable electrolytes10.1002/polb.23038 ↗
25. Performance of a solid-state photoelectrochromic device10.1016/j.solmat.2004.01.043 ↗
26. Photoelectrochromic window with Pt catalyst10.1016/j.tsf.2005.07.291 ↗
27. A new design paradigm for smart windows: photocurable polymers for quasi-solid photoelectrochromic devices with excellent long-term stability under real outdoor operating conditions10.1002/adfm.201503762 ↗
28. A fast-switching light-writable and electric-erasable negative photoelectrochromic cell based on Prussian blue films10.1016/j.solmat.2011.10.030 ↗
29. A novel photoelectrochromic device based on poly(3,4-(2,2-dimethylpropylenedioxy)thiophene) thin film and dye-sensitized solar cell10.1016/j.solmat.2011.09.038 ↗
30. Design of a new energy-harvesting electrochromic window based on an organic polymeric dye, a cobalt couple, and PProDOT-Me210.1002/aenm.201400379 ↗
31. Manufacture and demonstration of organic photovoltaic-powered electrochromic displays using roll coating methods and printable electrolytes10.1002/polb.23038 ↗
32. Fabrication of stable photovoltachromic cells using a solvent-free hybrid polymer electrolyte10.1039/C4NR01695E ↗
33. Degradation mechanisms of Pt counter electrodes for dye sensitized solar cells10.1016/j.solmat.2012.04.021 ↗
34. Assessment of the long-term performance of partly covered photoelectrochromic devices under insolation and in storage10.1016/j.solmat.2018.03.039 ↗
35. Performance and stability of “partly covered” photoelectrochromic devices for energy saving and power production10.1016/j.ssi.2015.04.010 ↗
36. Partly covered photoelectrochromic devices with enhanced coloration speed and efficiency10.1016/j.solmat.2011.09.014 ↗
37. Photocoloration efficiency and stability of photoelectrochromic devices10.1016/j.ssi.2012.10.024 ↗
38. Diffusion in the electrolyte and charge-transfer reaction at the platinum electrode in dye-sensitized solar cells10.1016/S0013-4686(01)00540-0 ↗
39. Methods to study the ionic conductivity of polymeric electrolytes using a.c. impedance spectroscopy10.1007/s100080000190 ↗
40. New photoelectrochromic device10.1016/S0013-4686(01)00391-7 ↗
41. Poly (-caprolactone)/siloxane biohybrids with application in “smart windows”10.1016/j.synthmet.2011.09.043 ↗
42. Improvement of ionic conductivity and performance of quasi-solid-state dye sensitized solar cell using PEO/PMMA gel electrolyte10.1016/j.tca.2015.07.006 ↗
43. Recent progress and utilization of natural pigments in dye sensitized solar cells: a review10.1016/j.rser.2017.04.075 ↗
44. End user impacts of automated electrochromic windows in a pilot retrofit application10.1016/j.enbuild.2011.12.003 ↗
45. Daylighting control performance of a thin-film ceramic electrochromic window: field study results10.1016/j.enbuild.2005.02.009 ↗
46. Modeling of optical and energy performance of tungsten-oxide-based electrochromic windows including their intermediate states10.1016/j.solmat.2012.09.010 ↗
47. Heterogeneous photocatalyst materials for water splitting10.1039/B800489G ↗
48. Integrated low-emittance-electrochromic devices incorporating ZnS/Ag/ZnS coatings as transparent conductors10.1016/S0927-0248(99)00101-4 ↗
49. Eliminating degradation and uncoveringion-trapping dynamics in electrochromic WO3 thin films10.1038/nmat4368 ↗
50. Influence of alkylaminopyridine additives in electrolytes on dye-sensitized solar cell performance10.1016/j.solmat.2003.09.001 ↗
51. Optical indices of electrochromic tungsten oxide10.1016/S0040-6090(97)00254-X ↗