journal article·2019-09

Synthesis and characterization of ditetradecyl succinate and dioctadecyl succinate as novel phase change materials for thermal energy storage

Derya Kahraman Döğüşcü

Publisher page

Abstract

Abstract This paper deals with the synthesis, characterization, thermal properties and thermal reliability of 1-tetradecanol and 1-octadecanol-succinic acid esters as a novel solid–liquid phase change materials (PCM) for thermal energy storage (TES). Ditetradecyl succinate (DTS) and dioctadecyl succinate (DOS) were synthesized by using succinic acid and excessive amount of fatty alcohol under vacuum and without catalyst. The esterification reaction yield was found above 95%. High purity ester compounds were characterized structurally by 1 H nuclear magnetic resonance ( 1 HNMR) and fourier transform infrared (FT-IR) spectroscopy techniques as thermophysical properties were investigated using a differential scanning calorimeter (DSC) and a thermogravimetric analyzer (TGA). DSC method was exploited for determination of phase change temperature, enthalpy, total enthalpy and specific heat (Cp) of DTS and DOS. Thermophysical properties of the produced esters were similar to fatty alcohols. Phase change temperatures and enthalpies were slightly lower than those of pristine fatty alcohols which were explained by the succinate distortion replaced by hydrogen bonding interactions. The DSC analyses pointed out that the phase change temperatures of TDS for heating period were between 47 °C and 46 °C as corresponding enthalpy for cooling period was between 202.4 and 197.5 Jg-1 respectively. The phase change temperature and enthalpy of DOS were between 64 °C and 63 °C and 194.9 and 191.7 Jg-1 respectively. In addition, the thermal cycling test including 1000 accelerated cyclings was conducted to determine the thermal reliability of the synthesized PCMs and structural and thermal consistency of the material were checked by post FT-IR and DSC analysis. Morphology and thermal endurance limits of the DTS and DOS were also investigated using POM and TGA respectively. Based on the results, it was concluded that the synthesized novel PCMs had considerable potential due to their satisfactory thermal properties, thermal reliability and stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Advanced Thermoelectric Materials and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Latent heat thermal energy storage systems with solid–liquid phase change materials: a review10.1002/adem.201700753 ↗
2. Review of the phase change material (PCM) usage for solar domestic water heating systems (SDWHS)
3. Morphological characterization and applications of phase change materials in thermal energy storage: a review10.1016/j.rser.2017.01.048 ↗
4. A review on phase change material (PCM) for sustainable passive cooling in building envelopes10.1016/j.rser.2016.03.036 ↗
5. Application of phase change materials for thermal energy storage in concentrated solar thermal power plants: a review to recent developments10.1016/j.apenergy.2015.09.016 ↗
6. Phase change materials and products for building applications: a state-of-the-art review and future research opportunities10.1016/j.enbuild.2015.02.023 ↗
7. Synthesis and thermal energy storage properties of xylitol pentastearate and xylitol pentapalmitate as novel solid-liquid PCMs10.1016/j.solmat.2012.03.014 ↗
8. Diesters of high-chain dicarboxylic acids with 1-tetradecanol as novel organic phase change materials for thermal energy storage10.1016/j.solmat.2012.04.030 ↗
9. Mehling · 2008
10. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
11. Phase change materials for building applications: a state-of-the-art review10.1016/j.enbuild.2010.03.026 ↗
12. Review on thermal energy storage with phase change materials (PCMs) in building applications10.1016/j.apenergy.2011.08.025 ↗
13. Utilization of phase change materials in solar domestic hot water systems10.1016/j.renene.2008.10.016 ↗
14. Phase change materials for solar thermal energy storage in residential buildings in cold climate10.1016/j.rser.2015.04.048 ↗
15. The synthesis and physical properties of the homologous series of fatty acids' esters
16. High-chain fatty acid esters of myristyl alcohol with even carbon number: novel organic phase change materials for thermal energy storage-110.1016/j.solmat.2011.04.015 ↗
17. High-chain fatty acid esters of myristyl alcohol with even carbon number: novel organic phase change materials for thermal energy storage-210.1016/j.solmat.2011.04.018 ↗
18. High-chain fatty acid esters of 1-octadecanol as novel organic phase change materials and mathematical correlations for estimating the thermal properties of higher fatty acid esters' homologous series10.1016/j.solmat.2013.01.024 ↗
19. Thermal properties of shape-stabilized phase change materials using fatty acid ester and exfoliated graphite nanoplatelets for saving energy in buildings10.1016/j.solmat.2015.06.040 ↗
20. Monotropic polymorphism in ester-based phase change materials from fatty acids and 1,4-butanediol10.1021/cg400339z ↗
21. Galactitol hexa stearate and galactitol hexa palmitate as novel solid-liquid phase change materials for thermal energy storage10.1016/j.solener.2011.05.014 ↗
22. Thermal energy storage properties and thermal reliability of some fatty acid esters/building material compositesas novel form-stable PCMs10.1016/j.solmat.2012.02.026 ↗
23. Synthesis and thermal energy storage properties of erythritol tetrastearate and erythritol tetrapalmitate10.1002/ceat.201000306 ↗
24. Preparation and characterization of fatty acid ester/building material composites for thermal energy storage in buildings10.1016/j.enbuild.2011.04.002 ↗