Round Robin Test for the comparison of spectral emittance measurement apparatuses
Source abstract
Abstract
CSP (Concentrated Solar Power) plants technologies use the concentration of solar energy on a receiver to produce heat and then electricity by a thermodynamical process. A solar absorber material is used to convert the energy carried by light into heat. This type of material works at high temperatures (up to 1000 °C) under a highly concentrated solar flux (up to x1000 or more). Optical properties determine the performance of absorbers and it is thus necessary to measure their spectral absorptance and emittance. Solar absorptance is directly linked to the capacity of the absorber material to convert the solar flux into heat. Emittance drives the radiative thermal losses for the heated absorber and depends on the absorber temperature. The characterization of a material in operational conditions at high temperatures requires advanced apparatuses, and different measurement methods exist for the characterization of these two quantities of relevance regarding an absorber. A Round Robin Test (RRT) was conducted with the objective of comparing different new optical apparatuses and methods for measuring the emittance or luminance of various solar absorbers in air. Measurements were carried out directly at temperatures up to 560 °C while heating the samples, and also indirectly by hemispherical reflectance measurements at room temperature. In this paper, the Round Robin Test procedure to compare apparatuses is described, as well as the corresponding reflectance and emittance results on four types of materials. In addition, a discussion of some factors of influence over high temperature measurements in air and of the observed discrepancies among results from the evaluators is presented. The reliability of reflectance/emittance measurements is also demonstrated and statistics of deviations from the mean value are analysed. These allow us to infer information about measurement reproducibility. The reflectance spectra of all samples after high temperature measurements in air (up to 500 °C) do not show any significant changes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Calibration and Measurement Techniques · Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Apparatus for measuring the emissivity of materials from far infrared to visible wavelengths in extreme conditions of temperature10.1016/j.infrared.2015.01.011 ↗
2. New experimental device for infrared spectral directional emissivity measurements in a controlled environment10.1063/1.2393157 ↗
3. New methods for measuring the thermal emissivity of semi-transparent and opaque materials
4. Optical properties of TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO tandem absorber coatings by phase-modulated spectroscopic ellipsometry
5. Optical characterization of TiAlNx/TiAlNy/Al2O3 tandem solar selective absorber coatings10.1016/j.solmat.2017.06.007 ↗
6. Development of optical tools for the characterization of selective solar absorber at elevated temperature10.1063/1.4949218 ↗
7. Selective solar absorber emissivity measurement at elevated temperature10.1063/1.4984498 ↗
8. Facility for assessing spectral normal emissivity of solid materials at high temperature10.1364/AO.54.008700 ↗
9. Characterization of high temperature solar thermal selective absorber coatings at operation temperature10.1016/j.egypro.2014.03.219 ↗
10. Importance of the spectral emissivity measurements at working temperature to determine the efficiency of a solar selective coating10.1016/j.solmat.2015.04.009 ↗
11. Standard IEC TS 62862-1-1, Solar thermal electric plants - Part 1-1: Terminology, 2018.
12. Modest · 2013
13. 〈http://www.stage-ste.eu/〉.
14. Hemispherical reflectance results of the SolarPACES reflectance Round Robin10.1016/j.egypro.2015.03.174 ↗
15. ISO 13528: statistical methods for use in proficiency testing by interlaboratory comparison.
16. Texture and porosity effects on the thermal radiative behavior of alumina ceramics10.1007/s10765-008-0510-1 ↗
17. Temperature measurement: christiansen wavelength and blackbody reference10.1007/s10765-005-6726-4 ↗
18. Normal and directional spectral emissivity measurement of semi-transparent materials using two-substrate method: alumina10.1007/s10765-011-0986-y ↗
19. Survey of emissivity measurement by radiometric methods10.1364/AO.54.000669 ↗
20. Infrared spectral emissivity characterization facility at NIST10.1117/12.542224 ↗
21. Device for spectral emissivity measurements of ceramics using a FT-IR spectrometer
22. Fourier transform spectrometer for spectral emissivity measurement in the temperature range between 60 and 1500 °C10.1088/1742-6596/13/1/015 ↗
23. Newly designed apparatus for measuring the angular dependent surface emissivity in a wide wavelength range and at elevated temperatures up to 1400 °C10.1088/1742-6596/395/1/012152 ↗
24. Analysis of the accuracy of methods for the direct measurement of emissivity10.1007/s10765-008-0402-4 ↗
25. Fourier-transform radiation thermometry: measurements and uncertainties10.1364/AO.37.005923 ↗
26. A spectral emissivity measurement facility for solar absorbing coatings10.1007/s10765-012-1171-7 ↗
27. The determination of the uncertainties of spectral emissivity measurements in air at the PTB10.1088/0026-1394/47/2/S14 ↗
28. Temperature error in radiation thermometry caused by emissivity and reflectance measurement error10.1364/AO.33.001950 ↗