journal article·2018-11

21% efficient screen-printed n-type silicon wafer solar cells with implanted phosphorus front surface field

Vinodh Shanmugam, Ankit Khanna, Delio Justiniani Perez, Rowel Vigare Tabajonda, Jaffar Moideen Yacob Ali, Aguilar Luisa Ma Ortega, Ison Jeffrey Garcia, Bianca Lim, Thomas Mueller

Publisher page

Abstract

Abstract In this paper n -type PERT (Passivated Emitter and Rear Totally diffused) silicon wafer solar cells with a diffused boron rear emitter and an implanted phosphorus front surface field are investigated. A key feature of the n -PERT rear emitter cell is that it uses the same sequence of surface passivation, rear local laser ablation and screen-printing processes as a commercial p -type PERC (Passivated Emitter and Rear Contact) cell. Therefore, this cell structure is very industrially relevant as it could simplify a production line upgrade from p -type cells to n -type cells. Additionally, ion implantation provides an elegant single-side doping process that further simplifies the processing sequence of n -PERT cells. Ion implantation also provides excellent control over the doping profile via a variation of post-implant annealing time. The effect of annealing time on the implanted phosphorus surface was evaluated in this study in terms of the front surface field dopant profile and its impact on the solar cells’ electrical characteristics. A shallower front surface doping profile resulted in better short wavelength response. Additionally, the performance of two different Al pastes (with and without Si content in the paste) was compared. The better-performing Al-Si paste generates a homogeneous Al- p + region under the contacts, which reduces the recombination at the contacts. By tailoring the phosphorus front surface field profiles and by minimising the recombination during the rear Al contact formation, efficiencies of up to 21% on large area 244 cm 2 n- type wafers were achieved so far.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. International Technology Roadmap for Photovoltaic (ITRPV),(eight ed.), 2017.
2. Recombination activity of interstitial iron and other transition metal point defects in p-and n-type crystalline silicon10.1063/1.1812833 ↗
3. P-type versus n-type silicon wafers: prospects for high-efficiency commercial silicon solar cells10.1109/TED.2006.878026 ↗
4. E. Cornagliotti, A. Sharma, L. Tous, L. Black, A. Uruena De Castro, M. Aleman, F. Duerinckx, R. Russell, P. Choulat, J. John, Large area n-type c-Si solar cells featuring rear emitter and efficiency beyond 21%, in: Proceedings of the 6th World Conference on Photovoltaic Energy Conversion, 2014.
5. Minority carrier lifetime degradation in boron-doped Czochralski silicon10.1063/1.1389076 ↗
6. Loss analysis of n-type passivated emitter rear totally diffused back-junction silicon solar cells with efficiencies up to 21.2%10.1109/JPHOTOV.2016.2520211 ↗
7. B. Lim, T. Brendemühl, M. Berger, A. Christ, T. Dullweber, n-PERT back junction solar cells: An option for the next industrial technology generation, in: Proceedings of the 29th European Photovoltaic Solar Energy Conference, 2014.
8. 21%-efficient n-type rear-junction PERT solar cell with industrial thin 156mm Cz single crystalline silicon wafer10.1016/j.egypro.2015.07.039 ↗
9. Structural investigation of printed Ag/Al contacts on silicon and numerical modeling of their contact recombination10.1109/JPHOTOV.2016.2591318 ↗
10. Influence of random pyramid surface texture on silver screen-printed contact formation for monocrystalline silicon wafer solar cells10.1016/j.solmat.2014.10.018 ↗
11. Electrical and microstructural analysis of contact formation on lightly doped phosphorus emitters using thick-film Ag screen printing pastes10.1109/JPHOTOV.2013.2291313 ↗
12. Challenges for lowly-doped phosphorus emitters in silicon solar cells with screen-printed silver contacts10.1016/j.egypro.2017.09.274 ↗
13. Extending the limits of screen-printed metallization of phosphorus-and boron-doped surfaces10.1016/j.solmat.2016.05.064 ↗
14. Impact of the phosphorus emitter doping profile on metal contact recombination of silicon wafer solar cells10.1016/j.solmat.2015.12.006 ↗
15. Status of high efficiency, low cost n-type silicon solar cells10.1016/j.egypro.2017.09.262 ↗
16. 21.0%-efficient screen-printed n-PERT back-junction silicon solar cell with plasma-deposited boron diffusion source10.1016/j.solmat.2016.05.054 ↗
17. Large-area n-type PERT solar cells featuring rear p+ emitter passivated by ALD Al2O310.1109/JPHOTOV.2015.2458041 ↗
18. Progress on large area n‐type silicon solar cells with front laser doping and a rear emitter10.1002/pip.2767 ↗
19. A. Uruena, M. Aleman, E. Comagliotti, A. Sharma, J. Deckers, M. Haslinger, L. Tous, R. Russell, J. John, Y. Yao. Beyond 22% large area n-type silicon solar cells with front laser doping and a rear emitter, in: Proceeding of the European Photovoltaic Solar Energy Conference Exhibition, 2015.
20. H. Hieslmair, Ion implantation for silicon solar cells, Cell, 18: p. 17.
21. Studies of diffused phosphorus emitters: saturation current, surface recombination velocity, and quantum efficiency10.1109/16.46368 ↗
22. New approach for the ablation of dielectrics from silicon using long wavelength lasers10.1016/j.egypro.2013.07.347 ↗
23. Generalized analysis of quasi-steady-state and transient decay open circuit voltage measurements10.1063/1.1416134 ↗
24. D. Kane, R. Swanson, Measurement of the emitter saturation current by a contactless photoconductivity decay method, in: Proceedings of the IEEE photovoltaic specialists conference, vol. 18, 1985.
25. Carrier diffusion corrected J0-analysis of charge carrier lifetime measurements for increased consistency10.1016/j.solmat.2015.06.043 ↗
26. Joonwichien, S. Utsunomiya, Y. Kida, M. Moriya, K. Shirasawa, H. Takato, Improved Rear Local Contact Formation Using Al Paste Containing Si for Industrial PERC Solar Cell. vol. PP, 2017, pp. 1–5.10.1109/JPHOTOV.2017.2767604 ↗
27. A.G. Aberle, S.R. Wenham, M.A. Green, A new method for accurate measurements of the lumped series resistance of solar cells, in: Proceedings of the Twenty Third IEEE Photovoltaic Specialists Conference Conference Record – 1993 (Cat. No.93CH3283-9), 1993.
28. A fill factor loss analysis method for silicon wafer solar cells10.1109/JPHOTOV.2013.2270348 ↗
29. Solar cell contact resistance-a review10.1109/T-ED.1984.21583 ↗